Analysis of damping performance of isolated rubber floating slabEI北大核心

Research purposes: The basic component of the track structure with isolated rubber floating slab is the concrete slab track born by the elastic element. The research was done on the mechanical properties of the floating slab, the analysis was made for the natural frequencies, mechanical response under dynamic load and damping performance, and the discussion was made on the reasonable thickness of the ballastless track to provide the reference to the track design. Research conclusions: The research results show that the natural frequency of the track system decreases with the increase of the thickness of the ballastless track, and the rate of change decreases with increase of the track thickness. The acceleration insertion loss of the track basis increases with the increase of the thickness of the ballastless track, and the rate of change decreases with increase of the track thickness. When the thickness of the ballastless track reaches at 0.4 m, the corresponding dynamic performance, the damping performance effect and the concrete amount of track bed are rather economical. From the present theoretical analysis and online testing, it can be seen the damping performance effect of the isolated rubber floating slab system is obvious, and its construction and maintenance programs are systematic.     

Field tests for evaluating cooperative intersection signal violation warning system (CISVWS)

This paper demonstrates the results of field tests for assessing a cooperative intersection signal violation warning system (CISVWS), which consists of (a) hardware, including an in-vehicle warning device, roadside antenna, and traffic signal controller, and (b) software to operate and test the cooperative system through vehicle to infrastructure (V2I) communication systems. Field tests were performed under real traffic situations in order to test the system in terms of the initiation time of the signal violation warning from the signal controller, the activation and duration of on board equipment (OBE), and the warning delay based on the relationships between distance variables, including the safe stopping distance, and the location of road side equipment (RSE). Findings from the field test at the real-world signalized intersection sites indicated that the system would be capable of reducing red light violations and intersection collisions through use of the in-vehicle warning device at signalized intersections.     

Robust design optimization of suspension system considering steering pull reduction

This paper presents robust design optimization method to reduce steering pull phenomenon. One of the biggest causes of steering pull phenomenon is tolerance of suspension system such as hard point, spring, damper and bush. Therefore, the relationship between suspension systems and steering pull phenomenon has as nonlinear characteristics. But, it can be very difficult to evaluate the analytical design sensitivity. Thus, it is impossible to directly apply a well-developed optimization algorithm based on gradient information. To avoid these difficulty, this study uses sequential approximation optimization process based on a meta-model. The robust design process has 28 random design variables with tolerance. For efficient design process, the sample variances for the design goals are approximated from meta-models. The proposed approach required only 62 evaluations until it converged. Optimal design reduced the drift by 80% and its deviation by 38.7%, respectively. This result proves that the suggested design method of suspension system is effective and useful.     

Objective evaluation of door-closing sound quality based on physiological acoustics

This paper presents a new method to objectively quantify the sound quality of doors closing in premium passenger cars. In previous works, psychoacoustic parameters have been used for objective quantification. However, these parameters do not agree well with subsequent subjective assessments. Therefore, the correlation between the psychoacoustic parameters and the subjective rating of door closing sounds in sampled cars is low, and it is not sufficient to use psychoacoustic parameters as an objective metric to quantify the quality of door-closing sounds. In this paper, a new method is proposed to objectively quantify the sound quality based on physiological acoustics and statistical signal processing. A gammatone filter is used as a pre-processing method in models of the auditory system and kurtosis, which is the fourth-order moment of the temporal signal and is used to extract quantitative information about the quality of door-closing sounds. The new metric obtained from the proposed method is highly correlated to subjective ratings and has been successfully applied to the quantification of door-closing sound quality.     

Experiments and thermal-electrical analysis of buss bar and relay assemblies in junction blocks

A junction block (or electrical distribution box) is electrical equipment that has been densely assembled from components such as buss bars, relays, and fuses to control the electric current flow in vehicles. Joule heat is generated in these parts as a result of electrical bulk resistance and electrical contact resistance. The generation of heat increases due to the complex behavior of modern vehicle electronic systems. Overheated parts can be damaged during operation due to thermal energy. The thermal assessment of a junction block is an important issue in automobile development. We suggest a methodology to simulate the transient temperature distribution of buss bars and electrical relays in a junction block. A finite element formulation of a coupled electro-thermal problem, which includes the effect of Joule heating, is introduced to the simulation. Finite element analysis (FEA) and experiments at the component level of buss bars and relays are conducted to investigate the thermal performance of a junction block. To verify the accuracy of the FEA procedure, the temperature history obtained by FEA is compared with the results obtained from experiments. The thermal-electric analysis of a typical junction block assembly is also discussed.     

Angular position error detection of variable reluctance resolver using simulation-based approach

The variable reluctance type resolver is widely used in an electric motor for hybrid electric vehicles as a rotor position sensor. The purpose of this paper is to present a simulation-based approach capable of determining a more accurate rotor shape of variable reluctance resolver in order to cut the time and cost of its development before testing a physical prototype. For the verification of the simulation-based approach to the position error detection of rotor, experiments for 8XVR resolver were conducted. Based on this approach, an optimal salient-pole rotor shape of 4X-VR resolver is proposed.     

Longer-term changes in mode choice decisions in Chennai: a comparison between cross-sectional and dynamic models

The rapid and continuing changes in travel and mobility needs in India over the last decade necessitates the development and use of dynamic models for travel demand forecasting rather than cross-sectional models. In this context, this paper investigates mode choice dynamics among workers in Chennai city, India over a period of five years (1999–2004). Dynamics in mode choice is captured at four levels: exogenous variable change, state-dependence, changes in users’ sensitivity to attributes, and unobserved error terms. The results show that the dynamic models provide a substantial improvement (of over 500 log-likelihood points and ρ² increases from 44% to 68%) over the cross-sectional model. The performance was compared using two illustrative policy scenarios with important methodological and practical implications. The results indicate that cross-sectional models tend to provide inflated estimates of potential improvement measures. Improving the Level of Service (LOS) alone will not produce the anticipated benefits to transit agencies, as it fails to overcome the persistent inertia captured in the state-dependence factors. The results and models have important applications in the context of growing motorization and congestion management in developing countries.

Design and development of a stated choice experiment for interdependent agents: accounting for interactions between buyers and sellers of urban freight services

Stated choice experiments have proven to be a powerful tool in eliciting preferences across a broad range of choice settings. This paper outlines the elements of a group-based experiment designed for interdependent urban freight stakeholders, along with the procedure to administer the questionnaire sequentially. The focus is on the design of a computer-assisted personal survey instrument and the value in disseminating the details of a new approach to design and collect stated choice data for interacting agents. The paper also discusses how to specify a reference alternative, and then how to recruit appropriate real-market or representative decision-making group members to participate in a subsequent phase of the survey, which incorporates the reference alternative and contextual information from an initial phase. The empirical strategy, set out in some detail, provides a new framework within which to understand more fully the role that specific attributes, such as variable user charges, influencing freight distribution chains might play, and who in the supply chain is affected by specific attributes in terms of willingness to pay for the gains in distribution efficiency.

Essentials of general average: A synoptic overview of an ancient maritime law

This article provides a synoptic overview of the concept of general average which is one of the saving acts in maritime law. Its principles were entrenched in the Roman law which acknowledged its origins being rooted in the Sea Law of Rhodes. Its evolution as customary law through the medieval maritime codes of the Mediterranean region is also traced in the article. The reader is then brought into the modern era of the international regime of general average through the advent of the York-Antwerp Rules. The basic principles of general average loss, including expenditures and sacrifices, and general average contributions are introduced through references to a number of leading cases. The current status of this ancient law and practice and debates over its future are briefly addressed in conclusion.     

A real-time multi-vehicle simulator for longitudinal controller design

This paper presents a new multi-vehicle simulator for platoon simulation. The main new feature of the developed simulator is a network structure for the real-time simulation of multiple vehicles, each with a detailed powertrain and engine model. It has a small initial delay, which is determined by the number of connected PCs, but the actual simulation is performed and displayed in real-time after this initial and one-time delay. Several longitudinal controllers, including a PID controller with gain scheduling, an adaptive controller, and a fuzzy controller, are also implemented in the simulator. Various system parameters can be modified interactively in the simulator screen, which is very useful for simulating a platoon of heterogeneous vehicles, in which vehicles with different dynamics and different longitudinal controllers may be involved. The simulator provides an excellent tool to develop vehicle longitudinal controllers and to study platoon behaviors. The developed simulator is also effective in testing the effects of nonlinearities neglected in the controller design phase, such as actuator delays and gear shifting schedule.