Tractor-semitrailer model for vehicles carrying liquids

This article presents a model for solving solid-fluid interactions in vehicles carrying liquids. A tractor-semitrailer model is developed by incorporating suspension systems and tire dynamics. Owing to the solid-fluid interaction, equations of motion for the vehicle system are coupled. To simplify the complicated solution procedure, the coupled equations are solved separately using two different codes. Each code is analyzed separately; but as the parameters of the two codes depend on each other, the codes must be connected at the end of each time step. To determine the dynamic behavior of the system, different braking moments are applied. As the braking moments increase, braking time decreases. However, it turns out that increasing the braking moment to more than a certain level produces no significant results. It is also shown that vehicles carrying fluids need a greater amount of braking moments in comparison to vehicles carrying solids during braking. In addition, as the level of the fluid inside the tanker increases, from one-third to two-third of the tanker's volume, the sloshing forces applied to the tanker's walls increase. It was also concluded that the strategy used in this article to solve for the solid-fluid interaction by incorporating vehicle dynamic effects represents an effective method for determining the dynamic behavior of vehicles carrying fluids in other critical maneuvers.     

Effects of the Los Angeles transit strike on highway congestion

In this paper we investigate the effect of the Los Angeles transit strike on highway congestion through analysis of highway sensor data, using both a before-and-after comparison, and a control group comparison. We found that average 5:00 a.m. to 10:00 p.m. traffic speeds declined by as much as 20% during the strike, and the average length of the rush period increased by as much as 200%, even though increases in traffic were small, despite the fact that transit riders constitute a small fraction of the traveling population. Speeds declined the most at locations upstream from the places where queues normally end. We believe that highways are especially susceptible to congestion during strikes because travelers have little opportunity to adjust and equilibrate their travel patterns, as is possible during ordinary periods of traffic growth.     

Demand for rail travel to and from airports

Rail access to airports is becoming increasingly important for both train operators and the airports themselves. This paper reports analysis of inter-urban rail demand to and from Manchester and Stansted Airports and the sensitivity of this market segment to growth in air traffic and the cost and service quality of rail services. The estimated demand parameters vary in an expected manner between outward and inward air travellers as well as between airport users and general rail travellers. These parameters can be entered into the demand forecasting framework widely used in the rail industry in Great Britain to provide an appropriate means of forecasting for this otherwise neglected market segment. The novel features of this research, at least in the British context, are that it provides the first detailed analysis of aggregate rail flows to and from airports, it has disaggregated the traditional generalised time measure of rail service quality in order to estimate separate elasticities to journey time, service headway and interchange, and it has successfully explored departures from the conventional constant elasticity position.     

Neuro-Fuzzy Control of a Tracked Vehicle Featuring Semi-Active Electro-Rheological Suspension Units

This paper presents vibration control of a tracked vehicle installed with electro-rheological suspension units (ERSU). As a first step, an in-arm type ERSU is designed, and its spring and damping characteristics are evaluated with respect to the intensity of electric fields. Subsequently, a 16 degree-of-freedom model for a tracked vehicle equipped with the proposed ERSU is established followed by the formulation of a neuro-fuzzy controller. This controller takes account for both ride quality and steering stability by adopting a weighting parameter between two performance requirements. The parameter is appropriately determined by employing a fuzzy algorithm associated with two fuzzy variables: the vertical speed of the body and the rotational angular speed of the wheel. Control performances to isolate unwanted vibration from bump and random road excitations are evaluated through computer simulations. In addition, maximum speed of the vehicle with 6 Watt power absorption is investigated with respect to the road roughness.     

Simulation Tools, Modelling and Identification, for an Automotive Shock Absorber in the Context of Vehicle Dynamics

For purpose of simulation of vehicle dynamics, a physical model of an automotive shock absorber has been developed and implemented in several software packages for multibody simulations. In the present paper, the damper model structure is shortly elaborated together with some measurement and estimation techniques to retrieve the model parameters, possibly from dynamometer measurements only. These techniques are illustrated on a shock absorber normally used on the front suspension of a BMW series 7.     

Vehicle Motion Analysis in Relation to Vehicle Safety

The influence of vehicle handling on the possible avoidance of accident situations is discussed. lit is shown that accident reconstruction at present does not provide the necessary information to relate the cause of accidents to the lack of road worthiness of vehicles. It follows that the vehicle behavior in proximity of its performance limit must be determined in order to infer its accident avoidance potential.

The paper presents a review of the state-of-the-art of vehicle modeling, simulation of vehicle maneuvers and full scale testing. The application of the direct method of the stability theory is suggested as a possible means of obtaining performance limit envelopes which are necessary for establishing standards of the performance of vehicles.     

REGULATION OF PRODUCTION OF PARATHYROID HORMONE－RELATED PEPTIDE （PTHrP） AND EXPRESSION OF ITS mRNA IN A HUMANLIVER－DERIVED CE

ＲＥＧＵＬＡＴＩＯＮＯＦＰＲＯＤＵＣＴＩＯＮＯＦＰＡＲＡＴＨＹＲＯＩＤＨＯＲＭＯＮＥ－ＲＥＬＡＴＥＤＰＥＰＴＩＤＥ（ＰＴＨｒＰ）ＡＮＤＥＸＰＲＥＳＳＩＯＮＯＦＩＴＳｍＲＮＡＩＮＡＨＵＭＡＮＬＩＶＥＲ－ＤＥＲＩＶＥＤＣＥＬＬＬＩＮＥＬｉＨｕｓｏｎｇ；Ｐ...     

Information needs of the continuing urban transportation planning process

Urban transportation is identified as a functional element in the broader context of urban facilities and services. From this point of view, the relative merits of separate information systems for transportation planning and general urban planning, as contrasted to unified systems for all urban management functions, are discussed. The overriding need to make the most effective use of urban resources argues strongly for the unification of urban information systems to the greatest possible extent consistent with the special data requirements of various functional programs. The need to identify and correlate data items for very small areal units and to keep current records of the constantly shifting patterns of social and economic activities in urban areas present difficult, but not insurmountable technical problems. However, the most serious barrier to the development and implementation of comprehensive urban information systems is concluded to be institutional, rather than technical, in nature.