Dynamic Performance of a Bulkhead Flat Car

The dynamic performance of a flat car is studied herein. The performance indices include roll angles, lateral accelerations, center plate loads, side bearing loads, wheel loads and spring deflections. These variables are maximum when the car is running at its critical speed, corresponding to either the rock and roll, or the bounce mode. The Association of American Railroads' (AAR) Flexible Carbody Model was used. The input for vertical track irregularities used in the simulation was generated from published spectra for U.S. Federal Railroad Administration (FRA) Class 4 track. After studying the car's performance with various column loads and spring suspensions, it was found that the most commonly used column load of 4,000 lbs. (17.8 kN) should be used. The spring suspension used in the original car design should also be adopted, in order to avoid spring bottoming.     

Choice of parking: Stated preference approach

Over recent years, parking policy has become a key element of transport policy in many countries. Parking policy measures can affect many different dimensions of travel behaviour but are likely to be most significant in terms of travellers' choice of parking type and location. This dimension of travel choice has, to date, received comparatively little attention, yet is of vital importance if we are to properly understand and predict the effects of parking policy measures.This paper presents two studies addressing this issue carried out in the United Kingdom and Germany. Both studies used a stated preference approach in order to collect disaggregate data on travellers responses to changes in parking attributes and used these data to build simple logit models of parking type choice. The studies were designed in order to allow comparable choice models to be estimated from the two datasets. The results obtained strongly indicate the need to separately identify the costs associated with different components of the parking activity (e.g., general in-vehicle time, parking search time, egress time) and also point to the existence of significant differences in the relative valuation of these components across different journey purposes. Where possible, the results of the choice modelling exercises are also compared with existing revealed and stated preference results and are found to be generally in line with prior expectations.     

Improving the predictiveness of the quasi-d combustion model for spark ignition engines with flexible intake systems

Fast and predictive simulation tools are prerequisites for pursuing simulation based engine control development. A particularly attractive tradeoff between speed and fidelity is achieved with a co-simulation approach that marries a commercial gas dynamic code WAVE™ with an in-house quasi-dimensional combustion model. Gas dynamics are critical for predicting the effect of wave action in intake and exhaust systems, while the quasi-D turbulent flame entrainment model provides sensitivity to variations of composition and turbulence in the cylinder. This paper proposes a calibration procedure for such a tool that maximizes its range of validity and therefore achieves a fully predictive combustion model for the analysis of a high degree of freedom (HDOF) engines. Inclusion of a charge motion control device in the intake runner presented a particular challenge, since anything altering the flow upstream of the intake valve remains “invisible” to the zero-D turbulence model applied to the cylinder control volume. The solution is based on the use of turbulence multiplier and scheduling of its value. Consequently, proposed calibration procedure considers two scalar variables (dissipation constant C _β and turbulence multiplier C _M ), and the refinements of flame front area maps to capture details of the spark-plug design, i.e. the actual distance between the spark and the surface of the cylinder head. The procedure is demonstrated using an SI engine system with dual-independent cam phasing and charge motion control valves (CMCV) in the intake runner. A limited number of iterations led to convergence, thanks to a small number of adjustable constants. After calibrating constants at the reference operating point, the predictions are validated for a range of engine speeds, loads and residual fractions.     

Primary productivity and export fluxes on the Canadian shelf of the Beaufort Sea: A modelling study

We present a coupled sea ice–ocean-biological (including ice algae) model in the Arctic Ocean. The 1D model was developed and implemented on the Canadian Beaufort Sea shelf to examine the importance of different physical processes in controlling the timing and magnitude of primary production and biogenic particle export over an annual cycle (1987). Our results show that the snow and sea ice cover melt and/or break-up controls the timing of the phytoplankton bloom but primary producers (ice algae and phytoplankton) on the outer shelf are essentially nutrient limited. The total annual primary production (22.7 to 27.7 g-C m^? 2) is thus controlled by nutrient “pre-conditioning” in the previous fall and winter and by the depth of wind mixing that is controlled in part by the supply of fresh water at the end of spring (ice melt or runoff). The spring bloom represents about 40% of the total annual primary production and occurs in a period of the year when sampling is often lacking. Time interpolation of observed values to obtain total annual primary production, as done in many studies, was shown to lead to an underestimation of the actual production. Our simulated ratios of export to primary production vary between 0.42 and 0.44.     

Experimental investigation using CFD for thermal performance of ventilated disc brake rotor

In the present work, different ventilated disc brake rotor configurations were analysed to enhance the heat transfer rate and obtain the uniform temperature distribution in the rotor. CFD code used in this work was validated at using experimental results obtained by conducting experiments on a test rig. The experimental analysis was performed to calculate the mass flow rate and heat dissipation through the rotor. Further, different types of rotor configurations viz. straight radial vane (SRV), tapered radial vane (TRV), alternate long and short vane (ALSV), variable diameter circular pillars (VDCP) were considered for the analysis. A rotor segment of 20° was considered for the numerical analysis due to its rotational symmetry. CFD results were in good agreement with the experiments. The maximum deviation of the numerical results were about 12 % from the experimental results. It is found from the analysis that among the different types of rotor configurations; variable diameter circular pillars (VDCP) rotor gives better rate of heat dissipation with more uniform temperature distribution in the flow passages. Hence for modern high speed vehicles VDCP rotor may be more appropriate.     

Perturbation/correlation based optimal internal combustion engine tuning

This paper addresses the application of the perturbation/correlation method to optimizing the torque output of internal combustion engines. This application was inspired by observations of the limitations in current techniques of the automotive performance tuning industry. Performance issues such as errors from true optimum spark timing and fuel injector pulse width values as well as convergence were considered for optimal tuning. The ability of the system to deal with engine cycle-to-cycle variations and their effect on input parameters is also analyzed.     

Equilibria of bilateral taxi–customer searching and meeting on networks

This paper proposes an equilibrium model to characterize the bilateral searching and meeting between customers and taxis on road networks. A taxi driver searches or waits for a customer by considering both the expected searching or waiting time cost and ride revenue, and a customer seeks a taxi ride to minimize full trip price. We suppose that the bilateral taxi–customer searching and meeting occurs anywhere in residential and commercial zones or at prescribed taxi stands, such as an airport or a railway station. We propose a meeting function to spell out the search and meeting frictions that arise endogenously as a result of the distinct spatial feature of the area and the taxi–customer moving decisions. With the proposed meeting function and the assumptions underlying taxi–customer search behaviors, the stationary competitive equilibrium achieved at fixed fare prices is determined when the demand of the customers matches the supply of taxis or there is market clearing at the prevailing searching and waiting times in every meeting location. We establish the existence of such an equilibrium by virtue of Brouwer’s fixed-point theorem and demonstrate its principal operational characteristics with a numerical example.     

Parameter transfer of common-metric attributes in choice analysis: implications for willingness to pay

There is a growing literature that promotes the presence of a mix of compensatory and semi-compensatory processing strategies in the way that individuals evaluate packages of attributes in real or hypothetical markets, and make choices. This paper proposes a specification for the utility form in a choice model to test if, given a pair of attributes with a common-metric (e.g., components of travel time or cost), the attribute with the dominating level defines the marginal (dis)utility that is assigned to both attributes. We refer to this processing strategy as a parameter transfer rule. We use a stated choice data set, in the context of car driving individuals choosing between tolled and non-tolled routes, to estimate a mixed logit model which incorporates the presence of the parameter transfer rule and the conventional fully compensatory rule, both existing up to a probability. We find that if this parameter transfer heuristic is part of the mix, the WTP is more than 30% higher, on average, than when only a fully compensatory rule is imposed. We also contrast the parameter transfer rule with other semi-compensatory heuristics which have been investigated in other papers, and show that the finding adds further support to the accumulating evidence that a semi-compensatory attribute processing rules tend to result in higher mean WTP estimates compared to the fully compensatory attribute processing rule.     

Changing ownership structures in the Dutch fleet

The new Dutch shipping policy has given rise to high expectation and curiosity in the world of shipping. This, together with the obvious difficulties of an ex-post study of the effectiveness of such innovative policy, has prompted the authors to take an interest in attempting to investigate changes in ownership of the Dutch fleet 2 years after the new policy has been introduced. To do this, a rather new concept of ‘flagging out’ has been adopted, which is interpreted as a process leading to different degrees of ‘foreignness’ in a shipping operation. In this paper, a method to structure is presented, and ownership information, and changes in it are presented, that are essentially based on the theory of stochastic processes. The data used is the Dutch fleet data, which includes information on the nationality of the flag, parent ownership and management over the period 1994–1998. The results yield interesting insights in the shifts in the ownership and operational structure of shipping companies induced by the new policy. In particular, they allow one to establish the origin of new vessels, in which stage of ownership/operation it is most likely that shifts occur, and to determine the relationship between the different stages of the ‘flagging out’ process. These results, thus, enable an evaluation of the areas in which the policy can be expected to yield results.