层状边坡渐进破裂与失稳过程数值模拟探讨

运用岩石破裂与失稳过程分析RFPA^2D系统，以含层理弱层边坡的渐进破裂与失稳分析为例，通过对边坡渐进破裂与失稳发生孕育机制及其锚固控制规律的数值模拟，数值模拟再现了含层理弱层和锚固边坡渐进破坏与失稳的发生、发展过程，模拟结果表明，复杂结构边坡的渐进破坏与失稳现象是一些简单机理的演化结果。     

Optimum throughput and performance evaluation of marine terminals

The performance of marine terminals has generally been evaluated by comparing their actual throughputs with their optimum throughputs. The engineering approach that generally has been used to determine optimum throughputs may be appropriate when terminals have natural hinterlands. In a deregulated (competitive) environment in which the natural hinterlands of marine terminals have become diffused, the economic approach for determining optimum throughputs should be condiered. In such an environment, marine terminals are not only concerned with whether they can handle a given amount of cargo but also whether they can compete for such cargo.     

Computer-Simulation of the Dynamical Curving Behaviour of a Railway-Bogie

This paper describes the modelling of a two axle railway-bogie with variable design configurations and its application in the investigation of the behaviour in transitional and circular curves. Several results indicate possibilities to improve the curving properties and recommend the usage of forced-steering bogies, which show better performance in narrow curves without unbearable sacrifices to high-speed-behaviour on straight track.     

Vibration reduction of H/Shaft using an electromagnetic damper with mode change

The objective of this study is to develop a damper that can reduce the amplitude of vibration in various frequency ranges. Previous H/Shaft vibration reduction methods work in a passive way. A dynamic damper reduces the amplitude of vibration at its first mode, but vibration still appears at the second mode. A mass damper or hollow shaft can shift the natural frequency to a lower or higher region. The fixed operating frequency prevents vibration from being reduced outside the operating frequency range. The proposed damper uses electromagnets as either masses or actuators to change the damper mode between dynamic damper mode and mass damper mode. The electromagnetic damper (EMD) can change its mode to respond to the vibration excitation at both low and high frequencies. The vibration reduction performance was evaluated by FRF tests in laboratory and vehicle conditions. The results were compared with those of a dynamic damper and indicate that the amplitude of vibration is reduced by 95.6 % when the EMD is implemented on an H/Shaft, whereas only 61.9 % vibration reduction is achieved by the dynamic damper.     

Engine performance and toxic gas analysis of biobutanol-blended gasoline as a vehicle fuel

A comprehensive study evaluating the performance of biobutanol-blended gasoline in passenger cars was conducted because biobutanol is considered a better biofuel than bioethanol as it has no water solubility and it has a higher caloric value, giving it a higher energy value. Several kinds of samples—suboctane gasoline, 8 volume percentage and 16 volume percentage biobutanol—blended gasoline, and a 10 volume percentage MTBE-blended market sample (as the oxygencontaining gasoline)-were tested to evaluate the engine performance in terms of the detergency of the intake valves and combustion chambers, power, emissions, and fuel efficiency. Additionally, the toxicity of the emissions from these biobutanolblended samples was tested in order to assess the viability of biobutanol as one of the competitive potential substitutes for MTBE as an oxygenator in the near future. The results show that biobutanol-blended gasoline samples had relatively better detergency, relatively higher power, and similar levels of emissions compared with those of MTBE-blended gasoline. Formaldehyde was emitted from all of the samples at almost the same levels and within the error range, whereas biobutanolblended gasoline samples emitted approximately three times the amount of acetaldehyde than did the suboctane gasoline. This study shows that biobutanol is one of the best alternative bioalcohol fuels for use in the near future.     

隧道检测系统及其在韩国高速铁路隧道的应用

介绍韩国高速铁路隧道安装的健康监测系统,提出基于检测数据诊断隧道衬砌可能破损的新系统识别方法。引入逆算法,即根据已知的形变数据和混凝土衬砌恒载,估计破损的程度和位置。对以刚度均减和裂缝概念为基础建立的两种模型进行效果和优劣比较。对理想化的隧道结构进行数学分析,并用检测数据中常用的白噪声对模型进行适应性研究。结果表明,基于刚度均减方法的模型1对白噪声相对不敏感,而以裂缝概念为基础的模型2由于受刚度减小的影响很小,易于现场应用。     

飞机降落冲击荷载作用下高铁隧道动力响应及疲劳损伤研究北大核心CSCD

针对运营期高铁隧道衬砌结构在飞机降落冲击荷载作用下的动力响应规律及疲劳损伤问题,以成自高铁下穿天府机场东二跑道区间隧道为工程背景,采用有限元分析的方法研究隧道动力响应及疲劳损伤规律。结果表明:B747-400型飞机在粗暴着陆后0.05 s时刻动力载荷达到最大值,约为500 kN;在单次粗暴着陆工况下,拱顶位移和受力最大,位移最大峰值为1.58 mm,拉应力最大峰值为437.79 kPa,压应力最大峰值为556.24 kPa,衬砌结构未出现塑性损伤;飞机荷载长期作用下,随着循环次数的增加,结构损伤部位和程度也随之增加,拱顶损伤最突出,其次为边墙,隧道衬砌在上方飞机长期粗暴着陆作用下的疲劳寿命大致为25 a。     

A bi‐level programming approach — Optimal transit fare under line capacity constraints

The fare of a transit line is one of the important decision variables for transit network design. It has been advocated as an efficient means of coordinating the transit passenger flows and of alleviating congestion in the transit network. This paper shows how transit fare can be optimized so as to balance the passenger flow on the transit network and to reduce the overload delays of passengers at transit stops. A bi‐level programming method is developed to optimize the transit fare under line capacity constraints. The upper‐level problem seeks to minimize the total network travel time, while the lower‐level problem is a stochastic user equilibrium transit assignment model with line capacity constraints. A heuristic solution algorithm based on sensitivity analysis is proposed. Numerical example is used to illustrate the application of the proposed model and solution algorithm.     

A capacity restraint transit assignment with elastic line frequency

This paper proposes a new formulation for the capacity restraint transit assignment problem with elastic line frequency, in which the line frequency is related to the passenger flows on transit lines. A stochastic user equilibrium transit assignment model with congestion and elastic line frequency is proposed and the equivalent mathematical programming problem is also formulated. Since the passenger waiting time and the line capacity are dependent on the line frequency, a fixed point problem with respect to the line frequency is devised accordingly. The existence of the fixed point problem has been proved. A solution algorithm for the proposed model is presented. Finally, a numerical example is used to illustrate the application of the proposed model and solution algorithm.