Real-Time Fuzzy Obstacle Avoidance Using Directional Visual Perception

This paper presents a novel vision-based obstacle avoidance approach for the Autonomous Mobile Robot (AMR) with a PanTilt-Zoom (PTZ) camera as its only sensing modality. The approach combines the morphological closing operation based on Sobel Edge Detection Operation and the (μ-kσ) thresholding technique to detect obstacles to soften the various lighting and ground floor effects. Both the morphology method and thresholding technique are computationaUy simple. The processing speed of the algorithm is fast enough to avoid some active obstacles. In addition, this approach takes into account the history obstacle effects on the current state. Fuzzy logic is used to control the behaviors of AMR as it navigates in the environment. All behaviors run concurrendy and generate motor response solely based on vision perception. A priority based on subsumption coordinator selects the most appropriate response to direct the AMR away from obstacles. Validation of the proposed approach is done on a Pioneer 1 mobile robot.     

Grade measurement with an instrumented car

Grade information may be needed for route surveys and is important when fuel consumption is studied. An instrumented car was used to measure acceleration along the road surface by double differentiating accumulated pulses generated off the drive train. A second acceleration measure included the component due to gravity relative to the car body. The difference between these acceleration measures contains grade information but it also influenced by suspension dynamics and pitch of the car body. The effect of suspension dynamics was removed by filtering which limited the minimum wavelength to 160 m. The effect of pitch was removed by a correction based on acceleration, jerk and the square of vehicle speed. The correction was computed from data collected on a level airfield runaway. The method is verified for a high capacity arterial road. Grade is measured to within 0.001 rad (95% confidence limits). Elevation derived from the grade data was consistent with road construction drawings to the same limits.     

Estimation of capacity utilization in world shipping

The surplus of tonnage which has characterized the shipping industry for over a decade has severely affected profitability and investment opportunities in the industry. This has prompted various schemes to reduce the surplus. A proper assessment of the size of the surplus is an essential requirement for sound policy measures. This paper, which focuses on the tanker sector, examines selected methods used to compute surplus tanker tonnage and proposes other methods. It observes that methods currently used give estimates of surplus tonnage which are basically identical to those obtained by using alternative methods. It concludes that while from 1984 the surplus tanker tonnage has been declining, from 1986 the decline has been rather small and the volume of the surplus is likely to stabilize in the next few years at more or less current levels. However, the paper points out conceptual and practical problems of determining the appropriate base periods or base operating conditions upon which surplus tonnage may be computed.     

Merging bus routes in Hong Kong’s central business district: Analysis and models

A significant portion of the 200,000 people working in Hong Kong’s central business district (CBD) relies on buses as their primary means of transport. During peak hours, nearly a thousand double-decker buses pour into a tiny area of 150 ha. This causes traffic congestion and air pollution. Moreover, given that the flow is uni-directional (into the CBD in the morning and out of the CBD in the afternoon), the occupancy of buses in the CBD is actually low.In this paper, we propose to reduce traffic congestion and to increase bus occupancy by merging bus routes. We describe the peculiar situation of the CBD in Hong Kong and explain the necessary conditions for the possible success of merging routes. Our analysis shows that merging will lead to an overall benefit for all parties, including government, bus operators, and passengers. The actual merging decisions, which routes to merge and at what frequencies buses should run, are determined by a mathematical model. The model also shows quantitatively the benefits of merging routes and the impacts of other factors. The procedure that we follow and the model that we adopt can be applied to other CBD.     

Automotive Steering Control in a Split-µ Manoeuvre Using an Observer-Based Sliding Mode Controller

Summary In this paper a sliding mode integral action controller and sliding mode observer are used to enhance vehicle stability in a split- µ manoeuvre. Anti-lock braking systems (ABS) have become an integral part of modern cars, and they have dramatically improved vehicle handling in braking manoeuvres. However, when a vehicle attempts to brake on a surface with uneven friction coefficient such as on wet or icy roads, a so-called split- µ scenario, the yaw moment generated by the asymmetric braking can prove demanding for an inexperienced driver. The controller presented hereworks in conjunction with a conventional ABS system to provide safe and effective braking through steer-by-wire. This paper extends previous state-feedback work by only using certain measurable quantities in the controller, estimating further signals by employing an observer.     

A capacity related reliability for transportation networks

A capacity related reliability for transportation networks with random link capacity is introduced. It is defined as the probability that the road network can accommodate a certain level of traffic demand, and is built on the concept of network reserve capacity. Network reserve capacity is defined as the largest multiplier applied to an existing origin-destination demand matrix that can be allocated to a transportation network in a user-optimal way without violating the link capacities. Due to large variability associated with link capacities, a probabilistic approach is adopted to model the different physical and operational factors that often degrade the capacity of roadways. A Monte Carlo simulation procedure is developed to estimate the capacity related reliability measure. Numerical results are provided to demonstrate the feasibility of the approach.     

Handling Capabilities of Vehicles in Emergencies Using Coordinated AFS and ARMC Systems

In this paper, an advanced control technique that can be implemented in hard emergency situations of vehicles is introduced. This technique suggests integration between Active Front Steering (AFS) and Active Roll Moment Control (ARMC) systems in order to enhance the vehicle controllability. For this purpose, the AFS system applies a robust sliding mode controller (SMC) that is designed to influence the steering input of the driver by adding a correction steering angle for maintaining the vehicle yaw rate under control all the time. The AFS system is then called active-correction steering control. The ARMC system is designed to differentiate the front and rear axles' vertical suspension forces in order to alter the vehicle yaw rate and to eliminate the vehicle roll motion as well. Moreover, the operation of the SMC is based on tracking the behavior of a nonlinear 2-wheel model of 2-DOF used as a reference model. The 2-wheel model incorporates real tire characteristics, which can be inferred by the use of trained neural networks. The results clearly demonstrate the enhanced characteristics of the proposed control technique. The SMC with the assistance of the ARMC provides less correction of the steering angle and accordingly reduces the possibility of occurrence of the saturation phenomenon that is likely to take place in the operation of the SMC systems.     

Advanced Control Methods of Active Suspension

This paper describes new control methods for the active suspension. For improving ride comfort further, preview control rule is proposed. For improving stability further, roll stiffness distribution control rule is examined by the test vehicle. Simulations and vehicle driving tests are conducted to confirm the effect of these new control methods. The results of simulations and vehicle driving tests show in our research phase that preview control can achieve a substantial improvement in ride comfort and application of roll stiffness distribution control provides a large improvement in stability     

Investigation on evaluation of yaw stability for medium commercial vehicles

This paper proposes test scenarios for evaluation of yaw stability for medium commercial vehicles. Maneuvering, speed, longitudinal tire force, tire-road friction coefficient, road slope, and load condition are considerable factors that have effect on the medium commercial vehicle yaw stability. After conducting an analysis on these six factors, effective test scenarios were developed. A sine with dwell test is well known as a test scenario for evaluation of performance of electronic stability control (ESC) on passenger vehicles and heavy commercial vehicles. The SWD test was modified considering medium commercial vehicle dynamics, and the ramp steer maneuver with maximum acceleration test was proposed. Simulation validation has been conducted using field test data. From simulation study, it was shown that the ESC system for medium commercial vehicle is effectively evaluated by the proposed test scenarios.     

Engine clutch torque estimation for parallel-type hybrid electric vehicles

This paper mainly focuses on the accurate estimation of the torque transferred through the engine clutch installed between the engine and the drive motor in parallel-type hybrid electric vehicles. The estimation of the engine clutch torque primarily relies on the forward-direction observer which uses the nominal engine net torque information. To overcome the limitation of using the nominal engine torque information that it may not be accurate during the transient states or due to the influence of external disturbance such as the road condition and wind, the forward-direction observer is supplemented by the use of reverse-direction observer which uses the driveline model and wheel speed measurements. In addition, the drive motor torque information is used to calibrate the nominal engine torque during the idle charging state, so that the driveline characteristic unique to parallel-type hybrid electric vehicle can be utilized to increase the estimation accuracy. Finally, the estimation performance of the designed observer is tested via simulation and experiments based on a real vehicle.