Developing a comprehensive programme for improving shipboard energy efficiency

This article identifies a set of fuel saving strategies designed to meet the needs of vessel owners and operators, and describes how the strategies can be combined into a comprehensive programme. The strategies are developed from over sixty potential fuel saving measures grouped on the basis of commonness of purpose and interdependency. These criteria reflect the finding that implementing certain strategies is a prerequisite to the success of other strategies, and the success of some strategies generates a need to implement other strategies. Operational strategies identified include: developing crew motivation for active participation in energy efficiency improvement programmes; altering ship speeds; reducing auxiliary load on main propulsion plant; improved matching of ship capacities and cargo volume; reducing miles traveled; and maximizing use of electronic navigation and communications aids. Physical plant modification strategies identified include: optimizing for reduced ship speeds; fuel switching, blending and modifying; hydrodynamic improvements to the hull and propeller; and improving thrust.     

Road pricing: some further comments

This paper extends the discussion of certain problems associated with road pricing raised in an earlier contribution to this journal. Firstly it is shown that where the value of time varies between different groups of traffic using the same congested road, optimal road pricing requires price discrimination between the groups such that those with the lowest value of time pay the highest charge and suffer the greatest losses. However, a uniform price based on an “equity” value of time would reduce the relative distributional effects. Secondly the paper takes up the suggestion that queueing (and by extension congestion) may be positively helpful in the allocation of resources and shows that this is not in general correct although there are situations in which the use of queueing alongside conventional pricing may have a role to play. Finally it is argued that governments’ apparent lack of enthusiasm for road pricing stems as much from political considerations as the more technical problems of applying it.     

Autonomous Emergency Braking Considering Road Slope and Friction Coefficient

The Autonomous Emergency Braking (AEB) systems have been actively studied for the safety enhancement and commercialized for the past few years. Because the driver tends to overly rely upon active safety systems, AEB needs to be designed to reflect the real road situations such as various road slope and friction coefficient. In this study, an AEB control algorithm is proposed to compensate for the effects of the slope and the friction of road. Based on the maximum possible deceleration for the real road conditions, the minimum braking distance is described with margin parameters for AEB activation control. The deceleration controller with a feedforward term is designed to avoid the collision during AEB operation on real road conditions. The proposed algorithm is validated in simulations first and the experimental verification is performed in the various slope conditions.     

Performance evaluation of the inside intersection median-turn lane markings on the mobility and safety performance of signalized intersections in the Philippines and Japan

Signalized intersections are one of the key elements that play a vital role at road networks. The efficiency and safety levels of intersections can affect the operational performance of the whole system. In general, turning traffic, especially median-turning, has always been considered as the most problematic movement in the operation of intersections. This becomes more critical with high turning demand where exclusive turning lanes (single or double) can be assigned to provide larger capacities for these movements and to reduce conflicts with through traffic. However, improper treatment of median-turn lanes could create cross-maneuvering behavior which may limit the expected increase in capacity and create safety issues. Median-turning lane markings are commonly provided at intersections in Japan to guide drivers while turning which is expected to reduce the conflicts among turning traffic. Meanwhile, in the Philippines, exclusive median-turn lanes are installed at intersections without proper treatment which may contribute to the low mobility and safety levels. Therefore, this study evaluated the impact of inside intersection lane markings on the operation of median-turn lanes in terms of mobility and safety. The vehicle maneuver, speed and interactions between the turning traffic were utilized as essential components for the assessment. The empirical analysis shows that conflicting trajectories were present on double turn lanes without median-turn lane markings in the Philippines, which resulted to serious conflicts among the turning vehicles and negatively influenced the turning speed and saturation flow rate of the turn lanes. On the other hand, the turn lane markings in Japan, provided a positive impact to mobility and safety of the turning lanes. Moreover, it was also found that the geometric characteristics and traffic signal phasing scheme highly affects the capacity and safety condition of signalized intersections.     

集装箱班轮公司航次运力销售过程优化模型

基于种群演变和共生理论,采用Cobb-Douglas生产函数描述航运市场整体需求,从顾客的购买行为出发,以收益最大作为集装箱班轮公司的经营目标,以基于时间序列的运力与运价作为决策变量,构建了集装箱班轮公司航次运力销售过程优化模型。运用Taylor公式与最小二乘法等代数变换手段将非线性规划问题转化为线性规划问题,对关键参数进行了标定与敏感性分析,并利用MATLAB软件进行仿真验证。仿真结果表明:当单个集装箱班轮公司的运力为104 TEU时,采用常规的销售策略,集装箱班轮公司可售出的运力为7 534~9 966TEU,获得收益为1 233 158~12 915 936USD,采用提出的优化模型,可售出的运力为9 915TEU,获得收益为15 111 975USD,收益至少提高17%;当2个集装箱班轮公司的运力均为104 TEU时,采用提出的优化模型,2个集装箱班轮公司可售出的运力分别为9 920、9 947TEU,获得收益分别为14 241 771、9 737 528USD,达到纳什均衡;当3个集装箱班轮公司的运力均为104 TEU时,采用提出的优化模型,3个集装箱班轮公司可售出的运力分别为8 289、5 526、6 034TEU,获得收益分别为6 755 755、6 119 906、4 377 758USD,达到纳什均衡。可见提出的模型可描述多个集装箱班轮公司运力销售情况,且表现出显著的优化效果。     

Physical processes in wheel–rail contact and its implications on vehicle–track interaction

Friction within the wheel–rail contact highly influences all aspects of vehicle–track interaction. Models describing this frictional behaviour are of high relevance, for example, for reliable predictions on drive train dynamics. It has been shown by experiments, that the friction at a certain position on rail is not describable by only one number for the coefficient of friction. Beside the contact conditions (existence of liquids, solid third bodies, etc.) the vehicle speed, normal loading and contact geometry are further influencing factors. State-of-the-art models are not able to account for this sufficiently. Thus, an Extended-Creep-Force-Model was developed taking into account effects from third body layers. This model is able to describe all considered effects. In this way, a significant improvement of the prediction quality with respect to all aspects of vehicle–track interaction is expected.     

Multi-response optimization of diesel engine performance parameters using thumba biodiesel-diesel blends by applying the Taguchi method and grey relational analysis

This paper presents an experimental study that involves an application of the Taguchi method and grey relational analysis to determine the optimum factor level to obtain optimum multiple-performance characteristics of a diesel engine run with different low-percentage thumba biodiesel-diesel blends. Four factors, namely, low-percentage thumba biodiesel-diesel blend, compression ratio, nozzle opening pressure and injection timing were each considered at three levels. An L₉ orthogonal array was used to collect data for various engine performance- and emission-related responses under different engine loads. The signal-to-noise (S/N) ratio and grey relational analysis were used for data analysis. The results of the study revealed that the combination of a blend consisting of 30% thumba biodiesel (B30), a compression ratio of 14, a nozzle opening pressure of 250 bar and an injection timing of 20° produces maximum multiple performance of a diesel engine with minimum multiple emissions from the engine.     

Multi-state control strategy of starting for a wet friction clutch via a fuzzy logic algorithm

Wet multi-plate friction clutches are used in automotive drivelines to transfer torque, change gears, and prevent motion by locking-up components in the transmission. The control strategy of starting is a crucial technology for the application of a wet multi-plate friction clutch in the automotive industry. In this paper, a multi-state fuzzy control strategy for starting is presented and applied to a continuously variably transmission (CVT) powertrain for the validation of this strategy. The operation of the clutch was divided into four states: parking, starting, riding and emergency. The starting state was investigated in detail. A fuzzy algorithm was employed to control the pressure of the hydraulic cylinder acting on the clutch. A distinguishing feature is that the pressure does not increase but decreases to implement smooth starting during the initial period of starting. The rapid-control prototype (RCP) of the wet friction clutch was developed to validate the new control strategy onboard a test vehicle. Based on the experimental results, the multi-state control strategy for a wet friction clutch is a viable candidate for engineering applications.