气压ABS系统流量特性的实验研究

开发了气压ABS电磁阀测试系统，建立了气室充、放气过程压力变化的微分方程，结合两者研究了气压ABS系统的流量特性，获得了某中型客车ABS系统在不同情况下的流量系数。讨论了ABS电磁阀的结构参数和动作频率对整个系统流量特性的影响，并得到了几种典型动作频率下的流量系数。建立的气室压力模型和所求得的流量系数为气压ABS控制逻辑的设计提供了依据。     

声强测量技术在摩托车噪声控制中的应用

本文介绍了声强测量技术在某１２５摩托车噪声控制中的应用，利用开发的ＣＥＣ声强测量分析系统对该摩托车进行噪声识别，快速，准确地找到其主要噪声源，通过有针对性地采取降噪措施，使该车行驶噪声显著降低。     

机场跑道填缝胶的研究

通过制备聚硫填缝胶，并对其进行抗拉伸、耐高低温等性能测试，讨论溶剂、环氧树脂、DBP、填料、催化剂等各因素对其性能的影响，总结其最佳实验配方。     

基于多旅行商问题的应急设施服务区划分模型

基于多旅行商问题，增设集散中心需求及应急服务设施资源容量约束条件，以最小化遍历区域内全部集散中心的综合旅行时间成本为优化目标，构建一种应急设施服务区划分模型，确定各应急设施的服务区范围.设计一种复合算法求解模型，首先基于P-中值选址模型的优化理念，形成初始方案；继而加入禁忌搜索算法，结合LKH求解器对模型进行迭代优化求得最优解.基于宁波市北仑区实际拓扑网络进行案例分析，验证了模型和求解方法的有效性.     

基于深度强化学习的智能船舶航迹跟踪控制

[目的]智能船舶的航迹跟踪控制问题往往面临着控制环境复杂、控制器稳定性不高以及大量的算法计算等问题。为实现对航迹跟踪的精准控制,提出一种引入深度强化学习技术的航向控制器。[方法]首先,结合视线(LOS)算法制导,以船舶的操纵特性和控制要求为基础,将航迹跟踪问题建模成马尔可夫决策过程,设计其状态空间、动作空间、奖励函数;然后,使用深度确定性策略梯度(DDPG)算法作为控制器的实现,采用离线学习方法对控制器进行训练;最后,将训练完成的控制器与BP-PID控制器进行对比研究,分析控制效果。[结果]仿真结果表明,设计的深度强化学习控制器可以从训练学习过程中快速收敛达到控制要求,训练后的网络与BP-PID控制器相比跟踪迅速,具有偏航误差小、舵角变化频率小等优点。[结论]研究成果可为智能船舶航迹跟踪控制提供参考。     

Development of knowledge based body structure concept design model

The purpose of this study is to propose a concept design process for an automotive body structure using technical information on the major joints and members of vehicles. First, in order to collect the technical information on major joints and members, 17 vehicles were selected using benchmark data. The collected technical information for the selected vehicles was the cross sectional shapes of each joint and member which were used for the analysis of joint stiffness, crashworthiness and static stiffness of the member to make a database along with cross section properties. This study applied a ‘What If Study’ technique to perform a concept design of an automotive body using the analyzed information and selected cross section meeting the design objectives. The criteria for the selection of the cross section were defined by subdividing the defined design objectives of an automotive body structure and constraints into members and joints. In order to configure an analysis model of an automotive body structure using the selected cross section, a shape parametric model was used and static stiffness, dynamic stiffness and crashworthiness were assessed to evaluate the configured automotive body structure. The evaluation result showed that the crashworthiness and static/dynamic stiffness were improved compared to an existing body structure. In addition, the weight of the body structure was reduced. Through this study, the process that can rapidly and effectively derive and evaluate the concept design of an automotive body structure was defined. It is expected that, henceforth, this process will be helpful for the study of automotive body structures.     

Nanoparticle emission characteristics and reduction strategies by boost pressure control and injection strategies in a passenger diesel engine

This research attempted to analyze nanoparticles and other harmful exhaust emissions in accordance with injection strategies and air-fuel ratio (AFR) changes for small diesel engines. The emission characteristics were analyzed in the medium-speed condition, which is the main driving range of a diesel engine. In the case of particulate matter (PM), the number of particles was measured, analyzed, and compared to identify the correlation and emission characteristics of nanoparticles by using a dilution device and condensation particle counter (CPC), which are international standards for particle measurement recommended by the Particulate Measurement Programme (PMP). The engine torque tended to be reduced as pilot injections were added, and the torque was increased by the increased boost pressure, but reduced by the exhaust pressure increase in a part of the low-load range. The number of nanoparticles was not influenced greatly by the change in AFR, but the reduction effect on the PM weight was great depending on the boost pressure increase. In addition, the number of nanoparticles tended to increase as the fuel injection timing became closer to TDC in all conditions, and its difference became larger with an increase in AFR. In addition, in the case of the pilot injection, nanoparticle emission showed similar characteristics depending on the main injection timing, but it was increased by advanced injection timing when performing the main injection only, and the number of the nanoparticles increased as pilot injections were added. Last, the optimal conditions for EMS calibration were analyzed by selecting the conditions of torque reduction and NOx increase within 5 % from all of the engine operating conditions; optimized conditions are presented.     

高速公路直线路段突起路标间隔设置方法

基于驾驶人的视觉惰性、视觉警示频率和感觉特性,分析了突起路标的视觉警示作用,确定了突起路标的闪现频率,计算与修正了突起路标的初始间隔。应用ADAMS/Car仿真软件模块,建立了道路、车辆和突起路标模型,将车型设置为大型车和小型车,大型车的车速设置为60、80、100km·h-1,小型车的车速设置为80、100、120km·h-1,大型车和小型车的方向盘转角均设置为1°、3°、5°。分别对提出的12m间隔与现行规范推荐的15m间隔各进行243次仿真,分析振动警示效果。仿真结果表明:在12m间隔下,平均碾压率为93.1%,小型车和大型车对应的平均警示率分别为41.7%和5.6%;在15m间隔下,平均碾压率为93.7%,小型车和大型车对应的平均警示率分别为33.3%和28.9%;12、15m间隔对小型车都具有较好的振动警示效果,15m间隔对大型车的振动警示效果更好。当高速公路夜间交通流较大或需要加大交通设施的夜间安全效果时,可选12m间隔提供良好的视觉连续性和视觉警示效果;考虑施工维护的方便性和经济性或者大型车比例较大时,可选择15m间隔。     

基于视觉识别的线控制动压力滑模控制

制动安全是车辆主动安全的关键技术之一.制动决策和执行器控制是影响线控制动系统性能的两个主要因素.路面自适应性和控制器鲁棒性分别对制动决策和执行器控制有着重要影响,制约着线控制动系统的发展.本文中以一种液压调控的线控制动系统为基础,针对路面自适应性和控制器鲁棒性问题,提出一种双层结构的制动系统控制器,上层采用计算机视觉的...