The parameter values which actually change with the circumstances, weather and load level etc.produce great effect to the result of state estimation. A new parameter estimation method based on data mining technology was proposed. The clustering method was used to classify the historical data in supervisory control and data acquisition (SCADA) database as several types. The data processing technology was impliedto treat the isolated point, missing data and yawp data in samples for classified groups. The measurement data which belong to each classification were introduced to the linear regression equation in order to gain the regression coefficient and actual parameters by the least square method. A practical system demonstrates the high correctness, reliability and strong practicability of the proposed method. 相似文献
The virtual prototype technology is applied to the design of the hydraulic impingement shovel, which is to increase the reliability of the design. The work principle of hydraulic impingement shovel is expatiated, and its dynamic equations are established. The 3D model of virtual prototype is built by PRO/E. Then the couple between the mechanical body of prototype and the hydraulic system is completed by virtue of ADAMS. Finally, the simulation is made on the virtual prototype. The simulation results show that the design of underwater hydraulic impingement shovel is rational. The virtual prototype technology could lay sound foundation of successful manufacturing of physical prototype for the first time and offer highly effective and feasible means for the design and production of underwater equipments. 相似文献
At present, the method of calculating the turbulent flow width around the bridge pier is not given in the "Standard for Inland River Navigation" (GB50139-2004) in China, and the bridge designer usually increases the bridge span in order to ensure the navigation safety, which increases both of the structural design difficulty and the project investments. Therefore, it is extremely essential to give a research on the turbulent flow width around the bridge pier. Through the experiments of the fixed bed and the mobile bed, the factors influencing the turbulent flow width around the bridge pier have been analyzed, such as the approaching flow speed, the water depth, the angles between the bridge pier and the flow direction, the sizes of bridge pier, the shapes of the bridge pier, and the scouring around the bridge pier, etc. Through applying the dimension analytic method to the measured data, the formula of calculating the turbulent flow width around the bridge pier is then inferred. 相似文献
Predicting damage to vibration isolators in a raft experiencing heavy shock loadings from explosions is an important task when designing a raft system. It is also vital to be able to research the vulnerability of heavily shocked floating rafts unreliable, especially when the allowable values The conventional approach to prediction has been or ultimate values of vibration isolators of supposedly uniform standard in a raft actually have differing and uncertain values due to defective workmanship. A new model for predicting damage to vibration isolators in a shocked floating raft system is presented in this paper. It is based on a support vector machine(SVM), which uses Artificial Intelligence to characterize complicated nonlinear mapping between the impacting environment and damage to the vibration isolators. The effectiveness of the new method for predicting damage was illustrated by numerical simulations, and shown to be effective when relevant parameters of the model were chosen reasonably. The effect determining parameters, including kernel function and penalty factors, has on prediction results is also discussed. It can be concluded that the SVM will probably become a valid tool to study damage or vulnerability in a shocked raft system. 相似文献
Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analysis of their impact would be impossible without numerical simulations. In this paper, a pressure-split two-stage numerical algorithm is proposed based on Volume Of Fluid (VOF) methodology. The algorithm is characterized by introduction of two pressures at each half and full cycle time step, and thus it is a second-order accurate algorithm in time. A simplified second-order Godunov-type solver is used for the continuity equations. The method is applied to simulation of breaking waves in a 2-D water tank, and a qualitative comparison with experimental photo observations is made. Quite consistent results are observed between simulations and experiments. Commercially available software and Boundary Integral Method (BIM) have also been used to simulate the same problem. The results from present code and BIM are in good agreement with respect to breaking location and timing, while the results obtained from the commercial software which is only first-order accurate in time has clearly showed a temporal and spatial lag, verifying the need to use a higher order numerical scheme. 相似文献
This paper studies the impact of removing the level crossing, which constitutes traffic hazard to the society, on house prices by conducting a quasi-natural experiment using the Level Crossing Removal Project (LXRP) implemented by the Victoria state government in Australia since 2015. Using a difference-in-differences method, we analyzed the changes in housing prices due to the improvement of transportation infrastructure, gauging the LXRP’s impact on house and unit submarkets separately. We found that the prices for house and unit markets increased significantly after the removal of level crossings, with the value uplift decreasing with distance from the removal site. This paper contributes to the existing literature by adding an empirical study related to the enhancement of infrastructure aiming to improve the traffic safety in the urban context. Unlike previous studies, this study examines the effect of improvement projects for existing infrastructure and provides relevant implications to improve the efficiency of investing public resources in infrastructure improvement.
This paper looks at the first and second best jointly optimal toll and road capacity investment problems from both policy
and technical oriented perspectives. On the technical side, the paper investigates the applicability of the constraint cutting
algorithm for solving the second best problem under elastic demand which is formulated as a bilevel programming problem. The
approach is shown to perform well despite several problems encountered by our previous work in Shepherd and Sumalee (Netw.
Spat. Econ., 4(2): 161–179, 2004). The paper then applies the algorithm to a small sized network to investigate the policy implications of the first and second
best cases. This policy analysis demonstrates that the joint first best structure is to invest in the most direct routes while
reducing capacities elsewhere. Whilst unrealistic this acts as a useful benchmark. The results also show that certain second
best policies can achieve a high proportion of the first best benefits while in general generating a revenue surplus. We also
show that unless costs of capacity are known to be low then second best tolls will be affected and so should be analysed in
conjunction with investments in the network.
Agachai SumaleeEmail:
Andrew Koh
Prior to joining the Institute for Transport Studies in December 2005, Andrew was employed for number of years as a consultant
in highway assignment modelling. He is an economist with wide ranging research interests in transport economics as well as
evolutionary computation heuristics such as genetic algorithms, particle swarm optimisation and differential evolution.
Simon Shepherd
At the Institute for Transport Studies since 1989, he gained his doctorate in 1994 applying state-space methods to the problem
of traffic responsive signal control in over-saturated conditions. His expertise lies in modelling and policy optimisation
ranging from detailed simulation models through assignment to strategic land use transport models. Recently he has focussed
on optimisation of road user charging schemes and is currently working on optimal cordon design and system dynamics approaches
to strategic modelling.
Agachai Sumalee
Agachai is currently an Assistant Professor at Department of Civil and Structural Engineering, Hong Kong Polytechnic University
(). He obtained a Ph.D degree with the thesis entitled “Optimal Road Pricing Scheme Design” at Leeds University in 2004. His
research areas cover transport network modeling and optimization, stochastic network modeling, network reliability analysis,
and road pricing. Agachai is currently an associate editor of Networks and Spatial Economics. 相似文献