The limits of analyzing service quality data in public transport

In recent years, management and academics have increasingly focused on quality management in public transport. In particular, many public transport operators regularly monitor their service quality over time and use these data to assess quality performance (e.g., for performance-based quality contracts) and to determine managerial decisions (e.g., budget allocations for service improvements). However, despite the widespread applications of service quality data in practice, it is unclear whether cross-sectional analyses and cross-temporal comparisons of service quality data provide valid insights for quality management purposes. In this study, we investigate the usability of cross-sectional analyses and cross-temporal comparisons of service quality data by conducting an empirical study that tracked a panel’s perceptions of the service quality of public transport and its choice over the course of three consecutive years. The results demonstrate that cross-sectional analyses provide valid insights for quality management. However, cross-temporal comparisons should be interpreted carefully because the results of these comparisons are surprisingly unreliable. In fact, we find that service quality data do not provide reliable results over time and therefore conclude that cross-temporal comparisons of service quality data must be interpreted with caution for quality management in public transport.     

Effects of intersection field of view on emergent collision avoidance performance at unsignalized intersections: analysis based on driving simulator experiments

Proper intersection sight distance can effectively lower the possibility of intersection accidents. American Association of State Highway and Transportation Officials (2011) provide a series of recommended dimensions of intersection sight triangles for uncontrolled and stop/yield‐controlled intersections. However, in reality, although the actual intersection design for unsignalized intersections satisfies the requirements of sight distance and clear sight triangle in American Association of State Highway and Transportation Officials' guideline, there are still a large number of crashes occurring at unsignalized intersections for drivers running stop/yield signs or failing to slow down. This paper presents a driving simulator study on pre‐crash at intersections under three intersection field of view (IFOV) conditions. The aim was to explore whether better IFOVs at unsignalized intersections improve their emergent collision avoidance performance under an assumption of valid intersection sight distance design. The experimental results show drivers' ability to identify potential hazards to be significantly affected by their IFOVs. As drivers' IFOV improved, drivers were more likely to choose braking actions to avoid collisions. Better IFOVs were also associated with significant increases in brake time to intersection and significant reductions in deceleration rate and crash rate, thus leading to a lower risk of traffic crash involvement. The results indicate that providing a better IFOV for drivers at intersections should be encouraged in practical applications in order to improve drivers' crash avoidance capabilities. Copyright © 2016 John Wiley & Sons, Ltd.     

Bayesian updating of trip generation data: Combining national trip generation rates with local data

With traffic impact analyses and impact fee assessment becoming more popular, the need for accurately estimating the trip generation rate of a proposed development is becoming more important. An overwhelming percentage of state transportation agencies depend either partly or entirely on the ITETrip Generation Report to predict the traffic that will be attracted to and/or produced from a proposed development. However, the rates obtained from the ITE publication have been derived from data collected throughout the United States. They represent a national average and fail to take into account the local trip generation characteristics that the site under consideration might have. This paper establishes a methodology for obtaining more reliable local trip generation rates using Bayesian statistics. In this method, the ITE rates are assumed to be the prior information, which are updated using limited local trip generation data that are available. The method also allows for temporal updating, incorporating subjective judgment and using borrowed data in the updating procedure. Sample calculations in this paper illustrate the developed methodology.     

Investigation of soot formation in Diesel-GTL fuel blends under quiescent conditions

In this study, a visual investigation of sprays and flames is performed, and soot formation in Diesel-GTL fuel blends is studied in a specially designed quiescent constant-volume chamber under various ambient gas temperatures and O₂ concentrations. Similar to the case of soot formation during diesel fuel combustion, the sooting zone during the mixing-controlled combustion of Diesel-GTL blends is located in the leading portion of the jet boundaries. Auto-ignition delay and soot concentration decrease with an increase of GTL content in the fuel blend. Soot also decreases with lower O₂ concentration, higher injection pressure, and lower ambient gas temperature. The lack of soot formation at lower O₂ concentrations and lower temperatures suggests that Diesel-GTL fuel blends can be successfully utilized in low-temperature diesel combustion technologies that are currently being developed. Furthermore, this mixing controlled combustion method with Diesel-GTL blends can be used to modulate various engine operation parameters, and therefore to simultaneously reduce the formation of soot and NOx within a wide range of diesel engine loads.     

Robust <Emphasis Type="Italic">H</Emphasis><Subscript>∞</Subscript> preview control of an active suspension system with norm-bounded uncertainties

A robust H _∞ preview control is investigated for an active suspension system with look-ahead sensors. The uncertain system is described by a state-space model with linear nominal parts and additional nonlinear time-varying norm-bounded uncertainties. Proof of robust stability and a feedback-type robust H _∞ preview controller are derived by augmenting the dynamics of the original system and previewed road input. As, however, the augmented previewed road input gives the system a much larger dimension than the original system, much more computation time is required for solving of Riccati equations. To resolve this problem, a decomposed robust H _∞ preview controller is proposed. Robust stability and performance variations for system uncertainties are shown using a numerical example of a quarter-car model.     

Emission analysis of a compressed natural gas directinjection engine with a homogenous mixture

In an era in which environmental pollution and depletion of world oil reserves are of major concern, emissions produced by automotive vehicles need to be controlled and reduced. An ideal solution is to switch to a cleaner fuel such as natural gas, which generates cleaner emissions. In addition, control over the in-cylinder air-fuel mixture can be best achieved through a direct-injection mechanism, which can further improve combustion efficiency. This need for cleaner automobiles provides the motivation for this paper’s examination of the use of computational fluid dynamic (CFD) simulations to analyze the concentrations of the exhaust gases produced by a compressed natural gas engine with a direct-fuel-injection system. In this work, a compressed natural gas direct-injection engine has been designed and developed through a numerical simulation using computational fluid dynamics (CFD) to provide an insight into complex in-cylinder behavior. The emissions analyzed in this study were carbon monoxide (CO), nitric oxide (NO) and carbon dioxide (CO₂), i.e. the main pollutants produced by natural gas combustion. Based on a stoichiometric mixture, the concentrations of CO and NO were computed using the dissociation of carbon dioxide and the extended Zeldovich mechanism. CO₂ was calculated using a mass balance of the species involved in the combustion process. The simulation results were then compared with the experimental data generated by a single-cylinder research engine test rig. A good agreement was obtained with the experimental data for the engine speeds considered for all emissions concentrations.     

Thermo-oxidative degradation of a carbon black compounded EPDM rubber hose

A method to measure the crosslink density of carbon black was used to analyze the aging behavior of a radiator hose made of carbon black filled EPDM (ethylene-propylene diene monomer) rubber under thermo-oxidative stresses. The crosslink density and the strength of the skin of the rubber specimens initially decreased slightly but then increased over time. The elongation at the break considerably reduced and did not show any similarity to the behaviors of the crosslink density. A possible cause of this reaction might be from the formation of rigid sulphoxide crosslinks and the crosslinks produced by the reaction of unvalcunized sulfurs. Aging the rubber specimens at 180°C caused a slight increase in the crosslink density and a large decrease in tensile strength and elongation. The aging experiment also caused a rapid increase of microhardness in the surface skin region. The formation of carbonyl groups in EPDM molecule chains and the formation of rigid sulphoxide crosslink, rather than the crosslink density variation, may have had a large influence. The changing behaviours of the mechanical properties, molecule chains and crosslinks showed significantly different characteristics in the skin and the interior with aging temperature and time.     

Reduction of emissions with propane addition to a diesel engine

Recent studies on dual-fuel combustion in compression-ignition (CI) engines, also known as diesel engines, fall into two categories. In the first category are studies focused on the addition of small amounts of gaseous fuel to CI engines. In these studies, gaseous fuel is regarded as a secondary fuel and diesel fuel is regarded as the main fuel for combustion. The objectives of these studies typically involve reducing particulate matter (PM) emissions by using gaseous fuel as a partial substitution for diesel fuel. However, the addition of gaseous fuel raises the combustion temperature, which increases emissions of nitrogen oxides (NO_x). In the second category are studies focused on reactivity-controlled compression-ignition (RCCI) combustion. RCCI combustion can be implemented by early diesel injection with a large amount of low-reactivity fuel such as gasoline or gaseous fuel. Although RCCI combustion promises lower NO_x and PM emissions and higher thermal efficiency than conventional diesel combustion, it requires a higher intake pressure (usually more than 1.7 bars) to maintain a lean fuel mixture. Therefore, in this study, practical applications of dual-fuel combustion with a low air-fuel ratio (AFR), which implies a low intake pressure, were systemically evaluated using propane in a diesel engine. The characteristics of dualfuel combustion for high and low AFRs were first evaluated. The proportion of propane used for four different operating conditions was then increased to decrease emissions and to identify the optimal condition for dual-fuel combustion. Although the four operating conditions differ, the AFR was maintained at 20 (? approximately equal to 0.72) and the 50% mass fraction burned (MFB 50) was also fixed. The results show that dual-fuel combustion can reduce NO_x and PM emissions in comparison to conventional diesel combustion.     

Investigation of regenerative and Anti-lock Braking interaction

The use of a regenerative braking mode can reduce overall vehicle energy usage for most of the most common drive cycles. However, a number of technical issues restrict the use of regenerative braking for all possible braking situations. These issues are concerned with two key limitations. The first is related to physical limitations of the applied regenerative braking system, e.g. Electric Motor (E-Motor) power limits; energy storage device capacity and vehicle load transfer etc. The second limitation results from the potentially detrimental interaction between regenerative braking and the Anti-locking Braking System (ABS). The first type of limitation can, to some extent, be alleviated by suitable choice of hardware and, as a consequence, will not be discussed further in this paper. The second type of limitation concerns the regenerative braking strategies during an ABS event. Some of the regenerative braking strategies designed and investigated within the Low Carbon Vehicle Technology Project (LCVTP) will be described and analyzed in this paper. A comparison of competing strategies is made and conclusions are drawn together with suggestions for further research. The work has been progressed as a part of a major research programme; namely the LCVTP, which has been conducted within an extensive industrial and academic partnership, mutually funded by the European Regional Development Found and Advantage West Midlands.     

Optimal design of an engine mount using an enhanced genetic algorithm with simplex method

This study provides an analysis of the applications of optimization routines for designing fluid mounts. After summarizing the concept of fluid mounts and their dynamic characteristics, we review the importance of the notch and resonance peak that occur in dynamic stiffness of fluid mounts. Fluid mounts are tuned for specific application so that their notch frequency coincides with the disturbance frequency, by selecting the proper parameters for the mount. Additionally, the mount parameters are selected such that the notch remains as deep (close to zero) as possible and the resonance peak is kept as short as possible. The notch depth and resonance peak present opposing requirements for the selection of mount parameters in the sense that lowering one will result in increasing the other. Using a bond graph model, this study will evaluate the effect of various parameters on the mount notch depth and resonance peak height characteristics. The results show that different parameters can have a varying effect on the notch frequency and depth, as well as the resonance frequency and peak height. The results of the study are extended by examining the effectiveness of two different optimization methods—namely, the Enhanced Genetic Algorithm (EGA) and Sequential Quadratic Programming (SQP)—for selecting the combination of parameters that can yield the deepest notch and shortest resonance peak. Using two different design cases, the study shows that SQP exhibits much more sensitivity to the initial conditions that are selected for the mount parameters than EGA. Both methods, however, are able to converge to an optimal solution within the constraints that are selected for the parameters. For both cases, EGA is able to converge to the set of parameters that provide a deep notch and a short resonance peak.