客车充电电源ZVZCS变换器的数字移相控制研究

通过对全桥直流变换器的几种软开关拓扑结构进行对比分析,研究适合铁路客车DC110V充电电源的变换器主电路拓扑结构及其数字控制方式。针对传统移相控制芯片电路复杂、可控性较差的问题,设计出基于零电压零电流开关(ZVZCS)变换器的数字移相控制电路设计方案,给出闭环控制的原理,并对调节器进行离散的抑制饱和设计。采用模拟及混合信号仿真软件Saber对设计方案进行仿真,然后将按照设计方案研制的数字信号处理器控制板安装在客车DC110V充电电源样机上进行试验,结果验证了设计方案的有效性和可行性,也可在高速动车组上推广运用。     

轨道车辆大功率IGBT散热器的热设计与试验研究

首先应用传热学理论对肋片散热器进行热阻计算,并采用Icepak软件进行仿真,最后为了验证理论计算和仿真的精度,进行了相关的散热器热阻试验.通过对散热器理论计算、仿真计算与试验结果进行对比研究证明,仿真计算能满足工程精度要求,理论计算经过修正后也能满足工程需要.     

铁路隔震连续梁桥地震碰撞响应研究

在地震作用下隔震桥梁的梁体位移比非隔震桥梁明显增加,使得相邻梁发生碰撞的概率增大。以1联3跨铁路隔震连续梁桥为例,选用3条人工地震波,采用非线性时程分析方法进行该桥的碰撞响应分析,研究梁间伸缩缝宽度和隔震支座刚度对梁间碰撞响应的影响。结果表明:随着伸缩缝宽度的增大和隔震支座刚度的增大,相邻梁碰撞的发生次数和碰撞力均有明显减小;地震作用下隔震固定墩墩底最大弯矩和最大剪力均随着隔震支座刚度的增加而增加。因此,在进行隔震桥梁设计时,应综合考虑隔震支座的隔震效果和碰撞响应,从而得到既经济又安全的隔震桥梁设计参数。     

基于混合通信顺序进程的高速铁路列控系统形式化建模与验证方法

针对高速铁路列控系统的混杂特性,提出一种基于混合通信顺序进程(HCSP)的列控系统形式化建模与验证方法。引入了HCSP的假设条件,建立列控系统的行为模型;定义了HCSP到混合自动机(HA)的转换规则,将HCSP模型转换成HA模型;利用模型检验工具PHAVer对HA模型进行自动验证。以高速铁路列控系统典型的行车许可运营场景为例,建立区间闭塞分区行车许可场景的HCSP模型;根据转换规则将行车许可场景的HCSP模型转换成HA模型;用PHAVer验证了所建立的区间闭塞分区行车许可场景模型的正确性,从而证明了基于HCSP的高速铁路列控系统建模及验证方法的有效性。     

面向“工程认证”的《汽车构造》教学设计

工程教育专业认证(简称"工程认证")是我国"五位一体"高教评估体系的重要组成部分,是新形势下促进我国高等工科教育发展、提升高等院校工科人才培养质量的重要方法和途径。本文立足重庆理工大学车辆工程专业工程认证建设实际,以专业核心必修课程《汽车构造》为对象,结合工程认证标准与成果导向(Outcome-based Education,简称OBE)理念,对其进行面向"工程认证"的教学设计,包括教学目标设计、教学内容及方式设计、教学评价设计及课程学习建议,为我校乃至其他高校车辆工程专业工程认证建设提供有益借鉴。     

基于欧标体系的打入桩停锤标准的确定方法*

针对复杂地质条件下如何确定合理可靠的打入桩停锤标准问题,研究基于欧标体系的打入桩停锤标准的确定方法。依托某码头工程,采用高应变打桩监控和静载试验相结合的方法,建立极限承载力与贯入度的对应关系,并最终确定用于指导该工程打入桩施工的停锤标准。结果表明：基于欧标体系确定的打入桩停锤标准以承载力是否满足设计要求为准则,标准可靠性高。     

Micro-Grinding Performance of Hard-Brittle Chip Materials in Precision Micro-Grinding Microgroove

The micro-structure on hard-brittle chip materials (HBCMs) surface can produce predominant functions and features. The micro-grinding with diamond wheel micro-tip is an efficient method to machine microstructure on HBCMs. However, different HBCMs and crystal orientation may have a significant influence on the micro-grinding performance. In this paper, the micro-grinding performance along different crystal orientation of HBCMs is investigated. First, a dressed 600^# diamond grinding wheel is used to micro-grind micro-structure on HBCMs. Then, the experiment of micro-grinding force test is completed. Finally, the quality of microgroove, the grinding ratio and the micro-grinding force are investigated and they are related to the crystal orientation of HBCMs. It is shown that the stronger resistance to the micro-crack propagation has the best quality of microgroove and the smallest grinding ratio. Moreover, the hardest single-crystal SiC has the best machinability and the micro-grinding force is 38.9%, 10.8% and 46.8% less than the one of sapphire, single-crystal Si and quartz glass, respectively. The direction to micro-grind easily is the crystal orientation 〈10\(\overline 1 \)0〉 for single-crystal SiC and sapphire. In addition, the micro-grinding force increases with the increase of the micro-grinding depth and feed rate and decreases with the increase of the grinding wheel speed.     

Lattice-based group signature with verifier-local revocation

Among several post quantum primitives proposed in the past few decades, lattice-based cryptography is considered as the most promising one, due to its underlying rich combinatorial structure, and the worst-case to average-case reductions. The first lattice-based group signature scheme with verifier-local revocation(VLR) is treated as the first quantum-resistant scheme supported member revocation, and was put forward by Langlois et al. This VLR group signature(VLR-GS) has group public key size of O(nm log N log q), and a signature size of O(tm log N log q log β). Nguyen et al. constructed a simple efficient group signature from lattice, with significant advantages in bit-size of both the group public key and the signature. Based on their work, we present a VLR-GS scheme with group public key size of O(nm log q) and signature size of O(tm log q). Our group signature has notable advantages: support of membership revocation, and short in both the public key size and the signature size.     

富水砂层盾构始发井防涌水检测与加固

基于广州地铁6号线大坦沙站盾构始发井的实践,研究富水砂层中破除盾构井端头门时防涌水的施工监测和工程检测方法,根据检测和监测结果,基于朗金土压力理论进行计算分析,提出相应的加固措施和方法。介绍了具体的防水加固措施和效果。     

城市轨道交通设施养护维修普查信息系统研究

针对城市轨道交通设施普查信息管理中数据量大、统计分析困难、无法依照养护标准提供决策支持等紧迫性问题,从轨道交通信息化建设入手,开发养护维修普查信息系统,提出可缩放矢量图形（scalable vector graphics,SVG）技术和Drools规则引擎的解决方案。