Reliability Modeling and Maintenance Policy Optimization for Deteriorating System Under Random Shock

Performance degradation and random shock are commonly regarded as two dependent competing risks for system failures. One method based on effective service age is proposed to jointly model the cumulative effect of random shock and system degradation, and the reliability model of degradation system under Nonhomogeneous Poisson processes (NHPP) shocks is derived. Under the assumption that preventive maintenance (PM) is imperfective and the corrective maintenance (CM) is minimal repair, one maintenance policy which combines PM and CM is presented. Moreover, the two decision variables, PM interval and the number of PMs before replacement, are determined by a multi-objective maintenance optimization method which simultaneously maximizes the system availability and minimizes the system long-run expect cost rate. Finally, the performance of the proposed maintenance optimization policy is demonstrated via a numerical example.     

Fuzzy-logic applied to yaw moment control for vehicle stability

In this paper, we propose a new yaw moment control based on fuzzy logic to improve vehicle handling and stability. The advantages of fuzzy methods are their simplicity and their good performance in controlling non-linear systems. The developed controller generates the suitable yaw moment which is obtained from the difference of the brake forces between the front wheels so that the vehicle follows the target values of the yaw rate and the sideslip angle. The simulation results show the effectiveness of the proposed control method when the vehicle is subjected to different cornering steering manoeuvres such as change line and J-turn under different driving conditions (dry road and snow-covered).     

柴油机曲轴有限元计算与台架试验数据对比分析

目前，国内柴油机行业普遍使用的曲轴弯曲疲劳强度试验台架，均采用音叉共振板结构。该试验台架对于大多数常规结构曲轴的连杆轴颈圆角疲劳强度的测定是比较准确的，但对于有些特殊结构曲轴的试验，却未能取得理想结果。以某曲轴台架试验、台架仿真模型及有限元计算模型数据为基础，分析对比了不同模型数据的差异及产生原因。     

汽车动力总成三点式悬置系统的设计方法探讨

首先分析汽车动力总成一悬置系统的振动激励、质量矩阵、刚度矩阵各元素的特点及其相互关系,阐释了系统弹性解耦设计的理论基础和重要性。然后根据动力总成一悬置系统刚度矩阵各元素的解析表达式,应用V形悬置组的弹性解耦原理,论述了目前普遍应用的三点式悬置系统在弹性解耦设计方面的问题,提出了悬置布置设计匹配的有效方法。     

Comprehensive lateral driver model for critical maneuvering conditions

A new comprehensive driver model is presented for critical maneuvering conditions with more accurate dynamic control performance. In order to achieve a safe maneuvering mode, a new path planning scheme to maintain stability of the vehicle was designed. A new steering strategy, considering the errors of vehicle position and yaw angle between the real track and the planned path, was established to obtain the steering angle. Therefore, the vehicle can be adjusted to accurately follow the desired path with the driver model, and the stability of the vehicle and the smoothness of the steering angle input were comprehensively considered. Simulation results were used to validate the control performance in comparison with the optimal preview driver model proposed by Macadam.     

Parameter identification for a LuGre model based on steady-state tire conditions

The purpose of this study was to effectively identify parameters for a LuGre friction model based on experimental measures. In earlier work related to this study (Yang et al., 2009), which was based on the characters of polygonal wear (Sueoka and Ryu, 1997), we showed a frictional vibration model for a mass on a moving belt. This model reflected lateral vibrations caused by velocity and toe-in angle. An important aspect of the present study is the improved friction model. A previous friction model, which divided the process into four parts, expressed the sable excited vibration well but failed to reflect the hysteresis loop change when vehicles accelerated or decelerated continuously. A LuGre friction model can solve this problem, but several model parameters must be obtained experimentally. We measured contact width and length of tires as vertical pressure changed; this provided a theoretical basis for apparent stiffness of a unit of tire tread. Based on tire data from Bakker E’s article in a SAE paper from 1987, we identified the Stribeck exponent and Stribeck velocity in LuGre. Then, the results were implemented in a vibration system that verified the rationality of the data.     

可持续交通——各方观点和长期挑战

从交通研究者和实践者的角度出发,以可持续交通这一概念为中心展开讨论。可持续交通宽泛地反映了可持续发展在交通领域的原则。随着可持续性这一概念的外延逐渐扩大,在它的定义、应用和价值取向上出现了不同观点。着重讨论可持续交通,以及如何理解和运用可持续交通,包括:1)将可持续性或者可持续发展作为一个整体的概念,包括关于可持续性的不同方法和定义之间的冲突;2)对可持续交通以及交通领域对其理解的探索;3)使用指标来实现可持续性的应用。然后识别了通往可持续交通之路的若干挑战,包括缺乏清晰定义、可持续性的固有冲突、可持续发展的跨领域本质、各种工作框架和指标体系、可持续发展的政治因素和交通领域实践中的不同观点。基于在该课题上的研究积累,总结解决这些问题的工作框架,提出因地制宜、注重结果、整体的方法来解决可持续交通中的挑战。     

汽车筒式液阻减振器技术的发展

分析了汽车乘坐舒适性／行驶平顺性和操作稳定性对筒式液阻减振器特性的要求，提出汽车在不同行驶工况减振器特性的要求是不的；分析了被动式减振器的发展历程及非充气和充气减振器的特点，阐述了机械控制式可调阻尼减振器，电子控制式减振器以及电流变和磁流变液体减器等的结构特点，工作原理及其动态特性；分析了筒式液阻减振器其于经验设计／实验修正开发方法的缺点，阐述了基于CAD／CAE技术的现代设计开发方法的过程及其关键问题，最后分析了我国筒式液阻减振器技术的发展状况及问题，展望了减振器技术的发展前景。     

Evaluation of forced flows on freeways with single‐loop detectors

This paper documents the development of a simple method for identifying and/or predicting freeway congestion using single loop detection systems. The proposed algorithm is simple and easy to incorporate into most freeway management systems. The Washington State Department of Transportation's Traffic Systems Management Center (TSMC) sponsored the original study. The investigation also led to a recommendation to replace the original TSMC definition of congestion or forced flow conditions with a more reliable indicator. Although, the TSMC has recently implemented a more advanced prediction system based on fuzzy set theory and neural networks to further identify patterns and rules for ramp metering strategies, the findings presented here continue to be constructive to freeway managers looking for quick and easy analyses that rely solely on single‐loop detection systems. The Seattle Area freeway study section used for the original study was the portion of mainline 1–5 northbound starting at the downtown Seattle Station 108 and ending at the Mountlake Terrace Station 193. Several days' worth of volume and lane‐occupancy data were collected for the afternoon time period from 2:30 p.m. to 6:30 p.m. Time intervals of 20 seconds were chosen for each data collection period. Important products of this research include the following:

• simple, and more reliable criterion for the definition of “bottleneck” or forced flow conditions than that originally used by the TSMC.
• simple, and reliable criterion for predicting impending “bottlenecks” or forced flow conditions.
• A proposed variable for improved selection of the appropriate metering rate. (Further analysis of the use of this variable for determining metering rates is recommended for future studies.

The proposed criteria are simple and easy to incorporate into current freeway management computer systems. Further investigation of freeway performance measurement using volume and occupancy data obtained from single‐loop systems is currently being performed.     

The stability of stochastic equilibrium in a two-link transportation network

Most research and applications of network equilibrium models are based on the assumption that traffic volumes on roadways are virtually certain to be at or near their equilibrium values if the equilibrium volumes exist and are unique. However, it has long been known that this assumption can be violated in deterministic models. This paper presents an investigation of the stability of stochastic equilibrium in a two-link network. The stability of deterministic equilibrium also is discussed briefly. Equilibrium is defined to be stable if it is unique and the link volumes converge over time to their equilibrium values regardless of the initial conditions. Three models of route choice decision-making over time are formulated, and the stability of equilibrium is investigated for each. It is shown that even when equilibrium is unique, link volumes may converge to their equilibrium values, oscillate about equilibrium perpetually, or converge to values that may be considerably different from the equilibrium ones, depending on the details of the route choice decision-making process. Moreover, even when convergence of link volumes to equilibrium is assured, the convergence may be too slow to justify the standard assumption that these volumes are usually at or near their equilibrium values. When link volumes converge to non-equilibrium values, the levels at which the volumes stabilize typically depend on the initial link volumes or perceptions of travel costs. Conditions sufficient to assure convergence to equilibrium in two of the three models of route choice decision-making are presented, and these conditions are interpreted in terms of the route choice decision-making process.