船舶电站自动控制系统通信软件设计

实现船舶电站自动控制的关键是通信技术,文章基于Modbus通信协议,设计了船舶电站自动控制系统通信软件,包括上位机PC和下位机PLC部分,完成对船舶电站实时监控.给出了控制系统的具体实旌方案,详细讨论了通信协议的设定及通信程序的编程要点.实践证明该通信软件具有较高的可靠性.     

韩、日城市轨道交通票款清分中心的经验与借鉴

通过对韩国首尔市、日本东京市和大阪市城市轨道交通清分中心运作的介绍,提出我国建设城市轨道交通票款清分中心须注意的问题,包括建设资金来源与运作模式、下级系统的技术标准统一、票款清分规则和划账方式等,对票款清分中心的功能和在不同情况下的清分规则提出相应的建议.     

基于模糊理论与层次分析法相结合的公交技术综合评价

采用模糊理论与层次分析法相结合的方式,对建立的城市公交技术综合评价模型进行评价．有效地改善了采用单一方式进行评价的弊端。     

非接触式泄漏电流的智能在线监测系统

设计了一种非接触式泄漏电流的智能在线监测系,集测量、数据处理、显示、报警于一体,可同时配三种非接触式泄漏电流传感器．该系统能在线监测电力系统中多台电力设备及其保护装置的绝缘性能和泄漏电流的大小,从而保障电力系统安全可靠地运行。     

南海某FPSO STP单点系泊系统的再评估

本文针对一艘中国南海北部服役的STP(Submerged Turret Production)内转塔单点FPSO在极端环境条件下单点静密封失效问题进行了分析。STP浮筒静密封主要依靠浮筒上端液压大钳的预紧力、浮筒与舱壁的静摩擦力等来抵抗系泊系统的载荷,从而保证浮筒与船体舱壁的紧密贴合。本文进行了新旧百年一遇环境条件作用下系泊系统载荷评估分析,比较结果可以发现：在新的百年一遇条件作用下,单点系泊系统的最大系泊缆张力增加31%,相应地系泊系统作用在锚链盘的平面载荷增加33%,垂向载荷增加12%。进一步地进行了新环境条件下两百年一遇极端环境作用下的系泊系统响应分析,比较结果可以发现：两百年一遇环境条件作用下,平台平面位移、系泊缆最大张力以及系泊载荷均出现了不同程度的增加,此时系泊缆已不能满足系泊系统完整状态的安全系数要求。分析结果表明：该FPSO的STP静密封系统在新的环境条件下存在较大失效风险,有必要对液压锁紧装置进行优化和加强设计,浮筒与舱壁有必要重新进行结构强度评估。     

凝水泵出口压力波动问题机理研究

针对某凝给水系统部分工况下出现的凝水泵出口压力波动问题开展相关研究工作,通过调研系统实际运行参数,采用数值仿真和理论计算进行分析,推导系统汽蚀余量特性方程,获取系统参数对凝水泵运行情况边界条件的影响,进而获取导致凝水泵出口压力波动的原因,并提出相应的控制措施。     

沿海港口煤炭专业化运输系统适应性探讨

结合全国煤炭生产消费及调运情况,分析北方煤炭下水港布局、后方铁路通道规划建设及煤炭下水趋势对专业化煤炭下水港未来发展的影响,研究南方煤炭接卸港码头布局、外贸进口煤炭和煤炭中转基地建设及接卸港发展趋势对接卸港布局及建设的影响,对全国沿海港口煤炭专业化运输系统分区域、分结构的适应性进行探讨,并提出问题及建议。     

Property Evolution of Sulphoaluminate Grouting Material under Pressure Circulation北大核心CSCD

Water-sealed underground oil tank projects are quite different from traditional underground projects since the water-sealing conditions are very strict and the difficulties caused by the geological specificity, structural specificity and construction specificity are key factors affecting the project. In light of the significant early initial setting time and rapid temperature increase of sulphoaluminate cement-based grouting material for a large domestic water-sealed underground oil tank with pressurized cyclic grouting, a laboratory grouting simulation is conducted. It is found that the properties of the sulphoaluminate cement-based grouting material are quite different under different pressure cycles, the hydration exothermic peak time gets shorter with an increase of circulation time, the compressive strength decreases with an increase of circulation time, and the longer the circulation time the more obvious the de-crease of compressive strength. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Mechanism of Tunnel Water Inflow Caused by Bending Failure of a Waterproof Dike Based on a Circular Thin Plate Mechanical Model北大核心CSCD

Water bursts during tunnel construction endanger construction, and it is therefore necessary to reserve a waterproof dike with the required thickness to avoid water bursts and to take reinforcement of the dike and treatment of the structure liable to trigger a water burst. Using the water burst at K5+398 of the Mingyueshan tunnel of the Shanghai-Chengdu expressway as an example, and considering the type of tunnel section and the upright mudstone of the dike, the waterproof dike at the work face is simplified as a round thin plate. A formula for the calculation of a minimum safety thickness for the critical waterproof dike is deduced by analyzing the force applied on the water-proof dike, and the minimum safety thickness for the water burst section at K5+398 of the Mingyueshan tunnel is cal-culated. The numerical simulation analysis demonstrates the critical thickness of waterproof dike at K5+398 of the Mingyueshan tunnel is 1.4-1.55 m, and the calculated water inflow and water burst basically agree with the actual condition. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Model Test on Grouting Law in Dynamic Water-Rich Sand Layers by the Electric Resistance Method北大核心CSCD

In order to study the diffusion law of grouting slurry in the water-rich sand layer under flowing water conditions, a grouting test model consisting of a main test system, a grouting system, and a measurement system was developed. And for detecting the diffusion scope of the grouts, a new resistivity method was proposed. It is found that the relationship between grouting pressure and grouting rate during the test is strong. Under hydrodynamic conditions, the grouting slurry diffuses elliptically. Due to gravity and the effect of the upper water flow, the center of gravity of the ellipsoid is below the grouting outlet, and the grouting effectively improves the physical and mechanical properties of water-rich sand bodies. At the same time, the resistivity method has a good application effect on the detection of grouting diffusion range. The range of slurry diffusion obtained by the resistivity method is basically consistent with the boundary of the stone body after excavation, indicating that the resistivity method is reliable for detection of grouting range in dynamic water-rich sand layer. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.