纯电动客车的CAN网络系统设计与开发

纯电动（PEV）客车相比于传统客车对整车的网络控制要求更高,其复杂的车载电子电气设备产生的干扰不仅严重影响外界电子设备和系统的正常工作,而且在相互之间也产生电磁干扰,影响自身正常工作。本文对网络设计中的一些关键问题进行研究,以有助于提高网络控制的稳定性和抗干扰性等。     

摩托车铝轮毂粉末涂装生产工艺

结合摩托车铝轮毂的具体情况,根据产品结构,可以合理选择采用手工静电喷涂,手工静电喷涂+自动静电喷涂或自动静电喷涂的方式涂装,目的是提高产品合格率和劳动效率;而粉末涂装又是一个实践性很强的工作,是边实践、边体会、边总结,不断提高的过程,在实际工作中,要注意不断总结和积累经验。     

Review on characterization of nano-particle emissions and PM morphology from internal combustion engines: Part 1

This paper is review of the characterization of exhaust particles from state-of-the-art internal combustion engines. We primarily focus on identifying the physical and chemical properties of nano-particles, i.e., the concentration, size distribution, and particulate matter (PM) morphology. Stringent emissions regulations of the Euro 6 and the LEV III require a substantial reduction in the PM emissions from vehicles, and improvements in human health effects. Advances in powertrains with sophisticated engine control strategies and engine after-treatment technologies have significantly improved PM emission levels, motivating the development of new particle measurement instruments and chemical analysis procedures. In this paper, recent research trends are reviewed for physical and chemical PM characterization methods for gasoline and diesel fueled engines under various vehicle certification cycles and real-world driving conditions. The effects of engine technologies, fuels, and engine lubricant oils on exhaust PM morphology and compositions are also discussed.     

Impact technique for measuring global dynamic stiffness of engine mounts

Engine mounts are used for engine vibration isolation. The dynamic performance of the mount depends on the orientation. Measurements of the dynamic properties of engine mounts are usually performed in the axial direction because of the problem related to actuator loading direction and set up costs. Impact technique is developed here to measure the dynamic driving point stiffness and driving point shear stiffness of engine mount in a single setup. The compressive and shear frequency-dependent stiffnesses are obtained in the vertical orientation. A transformation matrix is used to calculate the frequency-dependent stiffnesses and loss factors in other orientations. Three different designs of engine mounts are used to verify the accuracy of the transformation model. The correlation coefficient between calculation and measurement results show R²≥ 0.995 along the X- and Y-axes. For the Z-axis, mounts B and C showed R²≥ 0.95 and mount A 0.687 ≤ R²≤ 0.791.     

Methodology for bus structure torsion stiffness and natural vibration frequency prediction based on a dimensional analysis approach

Engineering bus design requires testing of bus structures prototypes in order to guarantee a certain level of strength and an appropriate static and dynamic behavior of the bus superstructure when exposed to road loads. However, experimental testing of real bus structures is very expensive as it requires expensive resources and space. If testing is done on a scale bus model the previous required expenses are considerably reduced. Therefore, a novel methodology based on dimensional analysis applied to bus structure prediction to evaluate the bus structure static and dynamic performance is proposed. The static performance is evaluated attending to torsion stiffness and the dynamic in terms of the natural vibration frequencies and rollover threshold. A scale bus has been manufactured and dimensionless parameters have been defined in order to project the results obtained in the scale bus model to a larger model. Validation of the proposed methodology has been carried out under experimental and finite element analysis.     

潜艇悬停水舱排注水控制方式比较

为合理设计悬停水舱,根据理想气体状态方程,计算不同的注排水控制方式下的潜艇高压气体消耗量和舱室气压增量,采用定性分析的方法,比较不同的注排水控制方式在噪声水平及能耗两个方面的特点。结果表明,在潜艇日益重视减振降噪及在高压空气消耗量和舱室气压增量可以接受的情况下,悬停水舱选择能耗及噪声最低的气排注控制方式最为合理。     

Research on the high-speed railway catenary systems online real-time testingEI北大核心

Research purposes: Some catenary system vibrated largely after the train since Chinese high-speed railway running, which came from an oral report of one rail worker on duty. Its accurate displacement must be measured in order to solve the problem. The measurement technique based on image has the advantages of non-contact and dynamic which is suitable for unique structure such as catenary system. The computer gets displacement value through analyzing image which may ensure train's safety when on-line test is carrying out. The research not only can be used to analyze the cause of abnormal existing catenary shaking and swaying amplitude, but also can provide the technical support for catenary of electrified railway online real-time test. Research conclusions: (1) The measured amplitude of cantilever, shoulder brace of positive feeder and carrier cable was small relatively and consistent with other normal sections of the whole line. (2) The interaction between catenary and pantograph was the main reason for its vibration, without the coupling effect between up-bound and down-bound. (3) The accurate value of test result indicated that the amplitude of catenary is under the range allowably, which verified the uncertainty of human sense and further clarified the safety hazard. (4) The non-contact measurement technique based on image can get the dynamic real time test data and have simple and convenient operation, which supplies subtle and suitable way for high-speed railway catenary systems real-time on-line test.     

基于批量分割的虚拟单元制造系统多阶段动态调度

鉴于虚拟单元中批量分割调度模型研究的不足以及虚拟单元下批量分割呈现的新特点,文中考虑作业车间中同类设备有多台,多重作业具有不同加工路径可选的情况下的批量调度问题,其中批量分割包含横向分割和纵向分割。考虑到调度的复杂性,文中运用一个多阶段调度模型对设备资源进行分配,确定设备上的批量种类、大小和顺序,并在交货期内使总生产成本达到最小。通过算法对案例研究结果的对比,证明了所提方法的可行性和有效性。     

基于CFD的半潜式钻井服务支持平台拖航阻力数值分析

通过分离涡模拟法（detached eddy simulation,DES）对半潜式钻井服务支持平台拖航阻力进行了研究,重点对平台拖航阻力、阻力系数和平台表面附近流场分布等特性进行了研究。研究表明：流方向下平台各结构所受阻力各不相同,下浮体占据总阻力比最大（尤其是90°来流方向下）。阻力系数及升力系数时历曲线变化具有“脉动性”。通过平台表面附近流场分布可以分析涡形成及受力原因,逆方向流及涡之间相互作用使得阻力有所减小。     

Construction Risk Management for Deep Excavation Adjacent to In operation Bored Tunnels

营运中的盾构隧道在邻近施工时周围地盘的应力可能因扰动而重新分布,使得盾构隧道暴露在因变形或位移衍生的结构损坏或营运中断等高风险下。为降低相关风险发生的可能性或后果的严重性,高雄计划将高雄车站段地下化工程捷运-R11永久站施工纳入风险管理,通过风险辨识、分析、评估以及以监测、巡检及沟通为基础的风险追踪查核等手段执行风险管理。依本计划执行成果,位于基地两侧营运中的盾构隧道在永久站主体工程开挖施工期间,各项风险均受到妥善的追踪、管控及处置。