Impacts of urban built environment on empty taxi trips using limited geolocation data

This study identifies the determinants of the empty taxi trip duration (ETTD) by combining three high-resolution databases—geolocation data in New York City, geodatabase of urban planning data, and transportation facilities data. Considering the nature of duration data, hazard-based duration model is proposed to explore the relationships between causal factors and ETTD, coupling with three variations of baseline hazard distribution, i.e., Weibull distribution with heterogeneity, Weibull distribution, and log-logistic. Furthermore, the likelihood ratio test is presented to implement comparisons of three baseline hazard distributions, as well as spatial and temporal transferability of causal factors. The results show significant complementary effects by subway system and competitive effects by city bus and bicycling system, as well as significant impacts of trip length, airport trip, average annual income, and employment rate. Urban built environment, for instance, density of road, public facilities, and recreational sites and ratio of green space, has various impacts on ETTD. The elasticity estimations confirm significant spatial and temporal heterogeneity in impacts on ETTD. In addition, the analysis on elasticity also reveals the considerable impacts of severe traffic congestion on ETTD within Manhattan. The modeling can assist stakeholders in understanding empty taxi movements and measuring taxi system efficiency in urban areas.     

Reliability Modeling and Maintenance Policy Optimization for Deteriorating System Under Random Shock

Performance degradation and random shock are commonly regarded as two dependent competing risks for system failures. One method based on effective service age is proposed to jointly model the cumulative effect of random shock and system degradation, and the reliability model of degradation system under Nonhomogeneous Poisson processes (NHPP) shocks is derived. Under the assumption that preventive maintenance (PM) is imperfective and the corrective maintenance (CM) is minimal repair, one maintenance policy which combines PM and CM is presented. Moreover, the two decision variables, PM interval and the number of PMs before replacement, are determined by a multi-objective maintenance optimization method which simultaneously maximizes the system availability and minimizes the system long-run expect cost rate. Finally, the performance of the proposed maintenance optimization policy is demonstrated via a numerical example.     

Effect of nozzle orifice diameter on diesel spray tip penetration according to various spray models for CFD simulation with widely varying back pressure

CFD simulations of spray tip penetration with the standard KIVA3V, ‘original gas jet’ and ‘Normal gas jet profile with breakup length formula’ (NGJBL) spray models were performed to investigate the effects of nozzle orifice size and ambient gas density combinations on the spray penetration. The accuracy of the CFD simulation results was estimated by comparing them with available experimental data. The ambient gas density was varied in 12 kg/m³ intervals from 12 to 69 kg/m³ for each nozzle orifice diameter. The nozzle orifice diameters used were 119, 140, 183 and 206 mm. A total of 20 cases in the CFD simulations were considered with combinations of the 4 nozzle orifice diameters and 5 ambient gas densities. CFD simulations with the NGJBL spray model were more accurate than those with either the standard KIVA3V or gas jet spray models as the nozzle orifice diameter and ambient gas density was increased. The NGJBL and original gas jet model is more effective in predicting the spray tip penetration near the nozzle tip region.     

Vibration reduction of H/Shaft using an electromagnetic damper with mode change

The objective of this study is to develop a damper that can reduce the amplitude of vibration in various frequency ranges. Previous H/Shaft vibration reduction methods work in a passive way. A dynamic damper reduces the amplitude of vibration at its first mode, but vibration still appears at the second mode. A mass damper or hollow shaft can shift the natural frequency to a lower or higher region. The fixed operating frequency prevents vibration from being reduced outside the operating frequency range. The proposed damper uses electromagnets as either masses or actuators to change the damper mode between dynamic damper mode and mass damper mode. The electromagnetic damper (EMD) can change its mode to respond to the vibration excitation at both low and high frequencies. The vibration reduction performance was evaluated by FRF tests in laboratory and vehicle conditions. The results were compared with those of a dynamic damper and indicate that the amplitude of vibration is reduced by 95.6 % when the EMD is implemented on an H/Shaft, whereas only 61.9 % vibration reduction is achieved by the dynamic damper.     

基于GTM的岩沥青混合料性能研究

岩沥青以其生产便利性及与沥青间的良好配伍性,得到了研究学者的关注。分别对不同岩沥青掺量的基质沥青和SBS改性沥青开展试验研究;基于"干法"工艺,采用GTM法成型不同岩沥青掺量的基质沥青混合料和SBS改性沥青混合料并开展高温稳定性和水稳定性试验研究。结果表明,随着岩沥青掺量的增加,沥青的粘度和耐热性能逐渐增强,黏附性效果得到改善;沥青混合料的高温稳定性能明显提高,水稳定性有所改善。综合考虑成本问题,推荐岩沥青在基质沥青混合料和SBS改性沥青混合料中的掺量分别为3.0%和1.0%。     

浅谈工程设计对公路建设投资的影响和相应对策

通过工程设计对公路建设投资影响的分析,阐明了工程设计是影响建设投资的主要因素之一,并通过实例证明了合理选择设计方案和采用技术标准等办法是控制投资的一条有效途径,而合理选择设计方案和技术标准又受到各种因素的影响和限制,对影响合理选择设计方案的原因进行了具体分析,并就此提出了几点相应对策,供同行们参考.     

彩色多普勒超声在动态监测移植肝及其并发症中的应用

目的探讨彩色多普勒超声在动态监测肝移植术后血流动力学变化及并发症诊治中的应用价值。方法回顾我中心107例原位肝移植术后应用彩色多普勒超声资料,汇总后行统计学分析。结果肝移植术后早期门脉流速较正常对照组升高,而肝动脉流速降低,后逐渐恢复正常。107例中发现肝动脉血栓形成2例(1.87%),肝动脉狭窄5例(4.67%),门脉血栓形成3例(2.80%),肿瘤复发7例(6.54%),诊断为急性排斥反应18例次(16.82%),慢性排斥反应10例次(9.34%),胸腔积液105例(98.13%),腹腔积液65例(60.74%),假性动脉瘤1例,胰漏1例,胆道感染4例(3.74%),胆道狭窄4例(3.74%),胆漏5例(4.67%),胆总管结石1例。结论彩色多普勒超声在动态监测肝移植术后血流动力学变化及并发症诊治中具有重要的临床意义。     

扑热息痛多腔体贮库式植入剂的制备及体外释放性能检测

目的以聚乳酸-羟基乙酸共聚物（PLGA）为载体,制备扑热息痛贮库式缓释体系,研究其体外释药性能。方法用微机电技术制备扑热息痛多腔体贮库式植入剂,采用高效液相色谱法检测药物的释放性能。本实验采用C18色谱柱,以甲醇-水（15：85）为流动相,检测波长为215nm,流速为0．8mL／min。结果载体形状不同,体外药物释放速率具有明显差异,外方内六边形扑热息痛植入剂缓释曲线符合Higuchi方程。结论扑热息痛多腔体贮库式植入剂制备工艺可行,载体的腔体形状对体外药物释放速度有较大影响。     

肋骨侧向稳定性特征屈曲有限元分析

环肋圆柱壳通常在周向布置肋骨来提高其稳定性,在深水压力作用下,肋骨发生侧向失稳的可能性加大,进而影响环肋圆柱壳的整体稳定性。在理论分析的基础上,采用有限元法对环肋圆柱壳进行在静水压力和轴向压力作用下的特征屈曲分析,研究肋骨侧向失稳的屈曲特征,得到肋骨侧向失稳的判别方法,为工程设计提供参考。     

科考船多波束导流罩线型CFD分析方法与试验验证

针对于科考船多波束导流罩设计和船体线型设计缺少关联分析的主要问题,介绍了一种科考船导流罩线型与船体线型一体化CFD分析方法,综合考虑实船航行过程中船体型线和导流罩型线之间的相互影响。根据这种分析方法,分别对导流罩和船体组合线型的阻力性能和防气泡性能进行了CFD预报,并进行了船模试验。两者吻合良好,验证了此种CFD分析方法的工程实用性。