RM80型清筛机车轴齿轮箱离合器容量的校核

RM80车轴齿轮箱可以改变液压马达输出的扭矩和转速,以适应清筛机不同工况下的运行要求。离合器是车轴齿轮箱的关键部件,文章对离合器容量进行了较详细的分析和验算,证明离合器能够达到使用要求,为离合器的推广和应用提供了参考依据。     

Development and Deployment of Public Transport Policy and Planning in Taiwan

Over the past decade, the escalating roadway congestion and environmental deterioration due to heavy use of private vehicles have provoked the Taiwan government to realize the importance of public transport systems. Under the “carrot-and-stick” rationales, the government has formulated public transport policies and exercised a series of related initiatives by providing sufficient and higher quality of public transport services so as to attract more private vehicle users. In this paper, the planning philosophy and policy formulation of Taiwan’s public transport development are highlighted. The most important initiatives, including the Five-year Enhancement of Mass Transportation Program and the upgrading public transport schemes in the National Development Plan are examined. Based on previous experience and lessons, we point out the most challenging issues that the government will encounter. Suggestions for the future of public transport planning are also addressed.     

格群的凸l—子群

设Ｇ是格群Ｈ的一个凸ｌ－子群，本文在不使用等式：Ｈ＝Ｇ∪Ｇ＇＝（ＧˇＧ＇）″的情况下，证明Ｇ在Ｈ中稠或在Ｈ的一个既稠又凸的ｌ－子群的直和项中稠，进而证明了Ｇ中存在的所有并与并在Ｈ中是被保持的。     

Analysis of Driver's Decelerating Strategy in a Car-following Situation

This report describes a decelerating driver-model expressed by driving mode transition in car-following situations. The assumptions for constructing the model are that decelerating strategy of a driver is classified into several simple driving modes and that a driver changs his driving modes based on his perceptible characteristics and experiential rules. Deceleration action is divided into three states; following, standing and braking, which are applied to the model. The model has two paths for driver's decelerating action, one of which is selected by the driver based on the perceptible characteristics and experiential rules. The suitability of the model has been experimentally verified.     

Multiphysic modelling of railway vehicles equipped with pneumatic suspensions

This article presents a multidisciplinary approach of railway pneumatic suspension modelling: both multibody and pneumatic aspects are taken into account. The work aims at obtaining a realistic model of the secondary suspension and coupling it with a multibody model of a train. Various components of the pneumatic circuit such as bellows, tanks, pipes and valves are taken into account. The article focuses on the bellow-pipe-tank subsystem for which several modelling approaches are presented and compared. Differences between differential and algebraic models are highlighted, and an application-dependent choice between them is suggested. A complete model of the pneumatic circuit is then obtained and coupled with a multibody model of the train. As a result, the behaviour of a suburban train equipped with a pneumatic secondary suspension is analysed, in particular undesired oscillating motions which affect the comfort. Topological modifications and improvements of the suspension are also investigated and discussed.     

浅析我国拆船业现状与发展

拆船业的发展对国家尤其是发展中国家经济发展起到重要的影响作用。本文从分析全球拆船市场、我国拆船市场入手,对我国拆船业的发展从政府及企业层面提出了相关建议。     

腹地经济发展对港口吞吐量影响的动态研究

腹地经济规模和经济结构的变化影响着港口的发展方向，但是一般的静态回归模型中解释变量参数是固定的，无法反应腹地各种影响因素变化对港口吞吐量产生的动态影响，而变参数状态空间模型克服了这一缺陷，解释变量的参数可以随时间改变，充分体现了解释变量对因变量影响关系的改变，因此能够更加准确反映考察期内腹地各种因素对港口吞吐量的动态影响。在介绍模型的基础上，就东北经济对大连港集装箱吞吐量影响进行了实证研究，得出了较为详尽的结论，这些结论是港口未来发展的重要决策依据。     

不同防治措施对边坡位移场影响的数值模拟

文章以西攀路K79 442~K79 570边坡工点为对象,对该工点分别采取抗滑桩、挡土墙、锚杆三种常用的工程措施(方案)进行加固,并对其分别进行数值分析。     

T_H1 AND T_H2 CELL ANTIGEN RECEPTORS IN EXPERIMENTAL LEISHMANIASIS

Ｔ_Ｈ１ＡＮＤＴ_Ｈ２ＣＥＬＬＡＮＴＩＧＥＮＲＥＣＥＰＴＯＲＳＩＮＥＸＰＥＲＩＭＥＮＴＡＬＬＥＩＳＨＭＡＮＩＡＳＩＳＳｔｅｖｅｎＬ．Ｒｅｉｎｅｒ，ＷａｎｇＺｈｉ＇ｅｎ；ＦａｒａｈＨａｔａｍ，ＰｈｉｌｌｉｐＳｃｏｔｔ，ＲｉｃｈａｒｄＭ．Ｌｏｃｋｓｌｅｙ（...     

Impact of information technology on public transport fares data

The work described was undertaken as part of the CASSIOPE project in the EC DRIVE programme. A range of fare collection procedures in public transport is described, and the importance of these for data collection by operators is stressed. It is suggested that such data management could be standardized and to this end four case studies were carried out in different European cities. Data models were built for each city, and these models are merged into a preliminary version of a generalized model. The need and uses for such a fare collection data model is explained.