The economics of technological change in shipping

Management of technological change is among the most important problems in shipping management. Models representing the economic impact of technological change in shipping are presented and the use of technology productivity analysis as a method for effective management of technological change in shipping is proposed.     

Devising business strategy for railways

This paper presents a case study which tackles a general problem for railway management, namely the formulation of a strategy to improve business financial performance. This is prefaced, in Section 2, by discussion of general principles - concerning the type of information system required, investigations to be conducted and associated measurement needs. The case study, of Section 3, concerns our investigations of VicRail's total business and its constituents. The task of financial improvement is revealed from an assessment of sectors' current cost-recovery positions and the identification of system joint costs. For freight sectors, future traffic prospects, pricing possibilities and the scope for more efficient operations are then considered, and the implications traced for overall deficit reduction and the development of business strategy. The concluding section draws some general lessons for railway managements.A fuller discussion by the authors of the theoretical framework employed, and particularly of the case study application, is contained in a complimentary publication: Improving Railway Financial Performance, published by Gower in January 1985.Transmark is a subsidiary of the British Railways Board, acting as its international consultancy. The authors, who were respectively study director and manager, wish to thank Bernard Warner (an independent consultant), Richard Eccles (of Transmark) and Adrian Balkyn-Rackowe (of British Rail) for their valuable contributions. The study report, titled Rail Cost — Pricing Options, was released by the Minister in April 1981.     

Dynamic Performance of a Bulkhead Flat Car

The dynamic performance of a flat car is studied herein. The performance indices include roll angles, lateral accelerations, center plate loads, side bearing loads, wheel loads and spring deflections. These variables are maximum when the car is running at its critical speed, corresponding to either the rock and roll, or the bounce mode. The Association of American Railroads' (AAR) Flexible Carbody Model was used. The input for vertical track irregularities used in the simulation was generated from published spectra for U.S. Federal Railroad Administration (FRA) Class 4 track. After studying the car's performance with various column loads and spring suspensions, it was found that the most commonly used column load of 4,000 lbs. (17.8 kN) should be used. The spring suspension used in the original car design should also be adopted, in order to avoid spring bottoming.     

Choice of parking: Stated preference approach

Over recent years, parking policy has become a key element of transport policy in many countries. Parking policy measures can affect many different dimensions of travel behaviour but are likely to be most significant in terms of travellers' choice of parking type and location. This dimension of travel choice has, to date, received comparatively little attention, yet is of vital importance if we are to properly understand and predict the effects of parking policy measures.This paper presents two studies addressing this issue carried out in the United Kingdom and Germany. Both studies used a stated preference approach in order to collect disaggregate data on travellers responses to changes in parking attributes and used these data to build simple logit models of parking type choice. The studies were designed in order to allow comparable choice models to be estimated from the two datasets. The results obtained strongly indicate the need to separately identify the costs associated with different components of the parking activity (e.g., general in-vehicle time, parking search time, egress time) and also point to the existence of significant differences in the relative valuation of these components across different journey purposes. Where possible, the results of the choice modelling exercises are also compared with existing revealed and stated preference results and are found to be generally in line with prior expectations.     

Impact Loads due to Wheel Flats and Shells

A Finite Element (FE) model of vehicle-track system is employed to duplicate the experiments carried out by British Rail and CP Rail System. The theoretical results of the wheel/rail contact forces, rail-pad forces and strains in the rail showed very good correlation to the experimental data. Extensive results are compared with experimental data in the time domain for through validation of the developed model. The characteristics of the impact loads due to wheel flats and shells are investigated based on the validated FE model. The study shows that the shape and size of flat or shell, axle load, vehicle speed and rail-pad stiffness mainly affect the impact loads. Adding elastomeric shear pads on the wheelset bearing does not reduce the wheel/rail dynamic contact force but it may reduce the dynamic force on the bearing. Reducing rail-pad stiffness to a certain level on a concrete-tie track may significantly reduce the dynamic load and the force transmitted to the concrete tie.     

A Comparison of Various Computer Simulation Models for Predicting the Directional Responses of Articulated Vehicles

This paper presents the results of a comparative study of the predictions, made using computer simulation models of different levels of complexity, of the directional responses of commercial articulated vehicles in steady-state and lane-change maneuvers. The differences in the predictions obtained using various models are examined and are compared with available experimental data. The objective of this study is to compare the capabilities and limitations of various simulation models for predicting the directional behavior of articulated vehicles.     

Privatization of urban transit: The Los Angeles jitney experience

This paper reports on a recent attempt to provide private transit in the form of jitney service in downtown Los Angeles. It describes the process undertaken to initiate jitney service and the resultant organization's structure and operation. A survey of jitney passengers provided information on the users and their tripmaking characteristics. A group of loyal jitney riders emerged who patronized the service because of its lower travel times and more personalized atmosphere. This group formed the core of frequent users. The Los Angeles experience is analyzed in terms of the economic feasibility of jitney service and the impact on the financial status of public transit. The public transit agency experienced a slight negative financial impact as a result of the jitney service. Ridership during peak hours declined somewhat but the jitney service was not frequent enough to carry sufficient passengers to allow the transit agency to cut costly peak hour service. This analysis shows that the jitney service ultimately was not an economically successful operation. The factors which would have increased the likelihood of success were increased frequency of service and higher fares, which would have been sustainable if not for unexpected developments in public transit financing. A labor pool willing to work for low wages, high transit use in the central city, relatively high transit fares and the availability of inexpensive vehicles appear to be prerequisites to a successful urban jitney operation.     

Management of coastal eutrophication: Integration of field data, ecosystem-scale simulations and screening models

A hybrid approach for eutrophication assessment in estuarine and coastal ecosystems is presented. The ASSETS screening model (http://www.eutro.org) classifies eutrophication status into five classes: High (better), Good, Moderate, Poor and Bad (worse). This model was applied to a dataset from a shallow coastal barrier island system in southwest Europe (Ria Formosa), with a resulting score of Good. A detailed dynamic model was developed for this ecosystem, and the outputs were used to drive the screening model. Four scenarios were run on the research model: pristine, standard (simulates present loading), half and double the current nutrient loading. The Ria Formosa has a short water residence time and eutrophication symptoms are not apparent in the water column. However, benthic symptoms are expressed as excessive macroalgal growth and strong dissolved oxygen fluctuations in the tide pools. The standard simulation results showed an ASSETS grade identical to the field data application. The application of the screening model to the other scenario outputs showed the responsiveness of ASSETS to changes in pressure, state and response, scoring a grade of High under pristine conditions, Good for half the standard scenario and Moderate for double the present loadings. The use of this hybrid approach allows managers to test the outcome of measures against a set of well-defined metrics for the evaluation of state. It additionally provides a way of testing and improving the pressure component of ASSETS. Sensitivity analysis revealed that sub-sampling the output of the research model at a monthly scale, typical for the acquisition of field data, may significantly affect the outcome of the screening model, by overlooking extreme events such as occasional night-time anoxia in tide pools.     

A game-theoretic analysis of competition among container port hubs: the case of Busan and Shanghai 1

Countries throughout the world, and especially within Asia, are investing heavily in container port infrastructure in the hopes of capturing a larger share of global shipping activity for their economies. Many existing ports are emphasizing developing the capacity to serve as a hub port, building deepwater berths with large terminals to facilitate transfer of containers from feeder ships to mother ships for intercontinental transport. We develop a game-theoretic best response framework for understanding how competitor ports will respond to development at a focus port, and whether the focus port will be able to capture or defend market share by building additional capacity. We apply this model to investment and competition currently occurring between the ports of Busan and Shanghai.