关于沥青混凝土路面的常见病害及防治措施

沥青混凝土路面主要应用于公路的面层,由于沥青混凝土材料本身的差异,以及受设计、施工水平的影响,沥青路面常常出现松散、脱皮、冻胀翻浆、水破坏、沉陷、开裂、泛油、坑槽等病害。这些病害的出现严重影响了路面行车速度、行车安全、加大了汽车磨损、缩短了沥青路面的使用寿命,使行车不畅,行成交通压力,造成道路使用年限缩短。本文具体结合工程项目阐述沥青混凝土的施工工艺、病害分析及防治措施。     

Application of digital image correlation method to in-situ dynamic strain measurement

Application of digital image correlation (DIC) method to determination of in-situ dynamic strain is presented in this study. Firstly, an integrative software is programmed based on the DIC algorithms and point-wise least-squares fitting technique. Then, simulated speckle images are generated to study the computational accuracy of this software. The experimental setup and procedures for measuring in-situ dynamic strain through both DIC and strain gauge are proposed. The DIC results are close to those measured by strain gauge. This fact reveals that DIC is a practical and effective tool for in-situ dynamic strain measurement. Finally, the full-field in-situ dynamic strain of another specimen is measured by DIC, and the overall distribution of the strain in the measurement area is clearly shown.     

掺混甲烷对乙烯层流预混火焰炭烟形貌的影响

针对掺混甲烷的乙烯层流火焰中的炭烟颗粒从形貌角度进行了研究,构建了具有相同当量比(2.07)、火焰温度、气体流速的层流预混乙烯火焰和掺混甲烷的乙烯火焰,并各自选取了3个高度进行热泳探针取样,采用TEM和AFM方法对各个工况的炭烟颗粒粒径分布、平均粒径、平均体积当量球径进行了对比。发现少量的甲烷掺混会令乙烯火焰中炭烟颗粒的尺寸变大,而当甲烷掺混量变多时该现象消失。而通过对颗粒的圆度、球度和分形维数计算和分析,发现即使是很小的颗粒也具有相似的不规则形状,这一现象广泛存在于各种火焰和各种大小的颗粒中,不受掺混比的影响,并且越大的颗粒结构越松散。     

论个人所得税税制模式改革

文中介绍了现行个人所得税中存在的问题,提出进行“综合征收模式”改革的必要性、合理性以及实行条件。     

基于GSM短消息的木材运输码单稽查系统

为解决因网络无法延伸到达林区作业现场而无法实时荻取运输数据问题,作者应用手机短信技术研究和构建了适合于南方林区特点的县级木材运输稽查管理网络系统。本文着重分析手机短信检尺码单信息处理系统的组成、短信平台的特点与选择、信息编码的格式与计算方法,详细论述了系统软件设计方法、长短信处理技术、稽查数据的短信格式和系统运行模式．系统的应用显著提高了木材运输稽查管理水平和工作效率,有良好的推广前景。     

A data model applied to the knowledge-based ICAS

Image-guided computer aided surgery system (ICAS) contributes to safeness and success of surgery operations by means of displaying anatomical structures and showing correlative information to surgeons in the process of operation. Based on analysis of requirements for ICAS, a new concept of clinical knowledge-based ICAS was proposed. Designing a reasonable data structure model is essential for realizing this new concept. The traditional data structure is limited in expressing and reusing the clinical knowledge such as locating an anatomical object, topological relations of anatomical objects and correlative clinical attributes. A data structure model called mixed adjacency lists by octree-path-chain (MALOC) was outlined, which can combine patient's images with clinical knowledge, as well as efficiently locate the instrument and search the objects' information. The efficiency of data structures was analyzed and experimental results were given in comparison to other traditional data structures. The result of the nasal surgery experiment proves that MALOC is a proper model for clinical knowledge-based ICAS that has advantages in not only locating the operative instrument precisely but also proving surgeons with real-time operation-correlative information. It is shown that the clinical knowledge-based ICAS with MALOC model has advantages in terms of safety and success of surgical operations, and help in accurately locating the operative instrument and providing operation-correlative knowledge and information to surgeons in the process of operations.     

墩梁固结法在山区桥梁的应用

山区普通公路上的桥梁,具有高墩、小跨径的特点.为满足高墩的抗推要求,将高桥墩和主梁固结是一种有效的方法.文章结合百色水利枢纽库区道路复建工程中的大琶屯交通桥、者仙屯交通桥,通过对不同结构体系的对比,讨论墩梁固结结构的力学特性和经济性.     

京珠高速公路隧道病害检测与处治对策研究

通过京珠高速公路隧道病害现场检测,对其主要病害进行了分类统计。考虑该隧道的勘察、设计、施工等因素影响,对该隧道主要病害产生原因进行了分析,在此基础上,对隧道病害等级进行了判定,并针对不同等级病害,提出了具体的处治措施。     

城市老城区健康道路交通模式探讨

为解决城市老城区交通压力持续增大的问题,从道路系统、公共交通系统、慢行交通系统三个方面进行研究,基于健康城市理念,并借鉴国外城市老城区交通发展模式,提出国内城市老城区健康道路交通模式应具有道路网络"高密度、小街区、微循环",公共交通全覆盖、高效率,慢行交通空间连续、设施完善、与公共交通无缝衔接等特征,为老城区健康道路交通规划设计提供参考。     

大倾角搁浅船舶扳正过程分析

在研究大倾角搁浅船舶的扳正过程中,计算了难船扳正力、横倾角和吃水。根据搁浅船舶的受力特点,建立了其力学模型,分析了扳正过程中横倾角、吃水、入泥深度与海底泥土性质对船体的影响。利用GHS软件模拟搁浅船舶的扳正过程,以某搁浅液化气船舶为例,求解了其扳正过程中船体扳正力、总搁坐力、剪力、弯矩和转矩,比较了难船不同扳正方案,分析了难船的扳正方式、搁坐位置、上层建筑与储气罐对难船打捞的影响。分析结果表明:在扳正过程中,3个方案的力学参数的变化趋势是一致的。最大扳正力相差较大,差值为9.1%~20.0%。搁坐力、剪力和弯矩均在横倾角为-55°~-50°时达到最大值,船体虽然在该阶段不需加载较大的扳正力,但仍应该注意船体的受力情况。在横倾角为-120°~-100°时,转矩变化非常剧烈。弯矩和转矩均出现了反向变化的现象,威胁船体结构的安全,扳正中应该谨慎处理。选择合适的扳正方案时应该综合考虑扳正力施力点的位置和扳正过程对船体与环境安全的潜在威胁。