采用排气循环技术改善车用柴油机NOx的排放特性

在增压中冷直喷式柴油机上，通过采用排气再循环（ＥＧＲ）的技术措施，分析研究了ＥＧＲ在不同条件下对柴油机ＮＯｘ的排放特性及其工作过程的影响，指出了ＥＧＲ抑制ＮＯｘ排放量的原理和具体效率。     

沥青路面填封裂缝和修补坑槽再破损原因分析

为了检验沥青路面裂缝填封和坑槽修补的效果,对填封裂缝和修补坑槽较常出现的再破损形式进行了归纳,并深入地分析了已填封裂缝和已修补坑槽再次出现破损的原因.     

军港磁谐振式无线供电动态调谐技术分析

磁谐振式无线电能传输具有高效率、灵活性和安全性的优势,利用它来实现军港无线供电具有广阔的应用前景。本文首先建立了磁谐振式无线电能传输系统的互感电路模型,分析了系统特性;在此基础上系统分析了磁谐振式无线电能传输动态调谐技术;最后立足于实际应用提出磁谐振式无线电能传输技术的军港应用亟待解决的几个问题。     

Two degree of freedom flow-induced vibration of cylindrical structures in marine environments: frequency ratio effects

The flow-induced vibration of a cylindrical structure is a very common problem in marine environments such as undersea pipelines, offshore risers, and cables. In this study, the vortex-induced vibration (VIV) of an elastically mounted cylinder at a low Reynolds number is simulated by a transient coupled fluid–structure interaction numerical model. Considering VIV with low damping ratio, the response, hydrodynamic forces, and vortex shedding modes of the cylinder is systematically analyzed and summed up the universal rule under different frequency ratios. On the basis of the analysis, we find that the frequency ratio α is a very important parameter. It decides the locked-in, beat, and phase-switch phenomena of the cylinder, meanwhile, it also influence the vortex mode of the cylinder. The trajectory of the two degrees of freedom (2 DOF) case at different natural frequency ratios is discussed, with most trajectories having a “figure of 8” shape and a few having a “crescent” shape. A fast Fourier transformation technique is used to obtain the frequency characteristics of the vibration of the cylindrical structure. Using the 2 DOF cylinder model in place of the 1 DOF model presents several advantages in simulating the nonlinear characteristics of cylindrical structures, including the capacity to model the crosswise vibration generated by in-line vibration.     

某一胶黏剂在橡胶金属件中的粘接性能研究

对比某一热硫化肢黏剂与现用肢黏剂在不同胶料、不同硫化体系、不同基体材质、不同表面处理方式及不同受力方式下的粘接性能,为公司储备胶黏剂提供参考依据。     

上海松江区现代有轨电车规划研究

现代有轨电车因其环保、舒适、高效、低造价、高品质等特点,在国际上得到广泛应用,我国多个城市也在规划和建设之中。但是,由于其在国内尚为一种全新的交通方式,没有标准或规范予以指导,规划及设计体系不完善,有些已建项目已呈现问题。文章结合上海松江区规划背景及交通特征,阐述有轨电车示范线T1、T2线的布局规划、建设的必要性及适应性,为即将开展有轨电车规划及建设的城市提供借鉴与参考。     

艰险山区铁路桥隧工程技术接口管理成熟度评价研究

艰险山区环境恶劣、地质复杂,使得铁路桥隧工程施工技术难度高、施工周期长,导致技术接口多、管理难度大.为实现对桥隧工程技术接口科学有效的管理,提出一种基于变权-靶心贴近度的艰险山区铁路桥隧工程技术接口管理成熟度评价模型.利用WSR系统方法对技术接口问题进行分析,构建铁路桥隧工程技术接口管理综合评价指标体系,并通过变权综合模型为指标赋权.运用靶心贴近度模型确定桥隧工程技术接口管理成熟度.以藏木雅鲁藏布江特大桥与安拉隧道为例,用该模型评估其技术接口管理成熟度等级,并借助雷达图直观反映技术接口管理水平.通过本文研究为艰险山区铁路桥隧工程技术接口管理提供了新思路.     

城市高铁站前广场景观规划设计研究

高铁站不仅是城市重要的交通枢纽, 更是一座城市重要的形象门户。 而在城市高铁站前广场建设中, 景观建设是十分重要的一项内容, 它直接影响着高铁车站建设的整体效果和观感。 文章从多个设计思路着手, 为景观设计实践提供一定的参考, 以便有效提升高铁站建设工作开展的科学性。     

Application of digital image correlation method to in-situ dynamic strain measurement

Application of digital image correlation (DIC) method to determination of in-situ dynamic strain is presented in this study. Firstly, an integrative software is programmed based on the DIC algorithms and point-wise least-squares fitting technique. Then, simulated speckle images are generated to study the computational accuracy of this software. The experimental setup and procedures for measuring in-situ dynamic strain through both DIC and strain gauge are proposed. The DIC results are close to those measured by strain gauge. This fact reveals that DIC is a practical and effective tool for in-situ dynamic strain measurement. Finally, the full-field in-situ dynamic strain of another specimen is measured by DIC, and the overall distribution of the strain in the measurement area is clearly shown.     

管道惯性测绘系统研制及应用

针对管道中心线地理坐标信息的测量需求,基于惯性导航原理,研制了以管道内检测器为载体的管道中心线测绘内检测设备,并将其与漏磁内检测器结合进行工程应用。选取了5处已知点对测绘结果进行了验证,测绘结果和实际验证结果表明:研制的惯性导航内检测器能够准确测绘管道中心线轨迹坐标,在校验点间距约为2 km时,5个距校验点约1 km的已知点的平均测绘误差约为1.8 m;通过将惯性导航检测器与漏磁检测器的组合使用,可有效获取管道缺陷的地理坐标信息,提高了管道内检测缺陷检测定位的精度。