Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

车用柴油机电控开发系统的软,硬件设计及应用

本文研制了一种新的发动机电 控燃油系统的开发系统的微机测控系统。     

空调客车围护结构隔热设计方案比较研究

利用数值分析的方法，分析了空调客车非稳态情况下四种结构车厢体的二维温度场分布，计算了车厢体的二维传热损失和热桥附加传热损失。在骨架和内衬之间加一层隔热组织改善了车的隔热特性，为客车围护结构隔热优化提供了依据。     

含水率对路用水泥混凝土的影响及微波在线测湿系统

在讨论了含水率对路用土质量的影响因素后，通过对不同种类测试器的分析，确定了较为适用的微波传感器，并给出了微波传感器的输出电压与集料含水率之间的关系式，进而对测试准确度进行计算。     

我国汽车金融业的发展现状及趋势展望

首先分析了国内外汽车金融业的发展状况，并从当前我国汽车金融业存在的问题入手，着重从内部和外部环境2个方面进行了分析，从而有针对性地提出了我国汽车金融服务的改革思路和解决相关问题的政策建议，并对未来发展趋势作出理性预测和判断，制度设计上更趋于合理、完善；服务质量和水平逐步与国际接轨；竞争推动下的具有中国特色的金融创新渐趋活跃。在此基础上笔者设想了一种银行一体化的营销模式，权当为未来银行汽车金融业务的开展作一有益尝试。     

碳纤维复合材料与铝合金连接方式选型研究

多材料混合车身设计是汽车轻量化的重要手段,其中铝和碳纤维的连接是轻量化车身结构设计和工艺装配面临的挑战.研究了SPR、FDR、抽芯铆钉3种连接方式及结构胶应用于碳纤维复合材料和铝合金异种材料的连接,测定了连接结构的剪切和十字拉伸性能,分析了连接方式和结构胶对力学性能和失效模式的影响,旨在指导碳纤维复合材料连接设计与选择...     

CFG桩在含软弱夹层路堑边坡加固中的应用

结合武广客运专线施工,介绍CFG桩在含软弱夹层的路堑边坡加固中的应用,包括加固机理、施工方法、效果分析、质量控制及施工常见问题的处理等。工程实践表明,在含软弱夹层的路堑边坡中采用CFG桩进行加固,可大幅提高边坡的稳定性。     

颗粒群特征对水泥性能的影响及改善途径研究

水泥颗粒状态与水泥及混凝土的许多主要性能都有较大关系.改善水泥颗粒群特征是水泥行业必须重视的课题.主要技术措施可采取改进水泥粉磨工艺、提高选粉机的选粉效率、采用助磨剂及应用椭圆球研磨体等,能明显改善水泥物理性能,提高水泥强度.     

试论萧红作品的复合视角

萧红以她女性的敏感通过儿童视角书写童年经验,而儿童视角文本中往往是儿童身份叙事者和隐含作者即成人身份共存,构成作品的复合视角,儿童简单审美的声音与成人复杂评判的声音轮流切换,形成两套不同的话语系统,在儿童轻松愉快的表层叙述中,隐含了生活本身的沉重与丰富,因而对读者有重要的启发意义.     

长枕埋入式无碴轨道对谐振式轨道电路传输

对长枕埋入式无碴轨道泄漏电阻和感应阻抗对谐振式轨道电路传输特性的影响进行了分析,通过科学方法进行了测算,并提出了相应的解决方案,而且通过试验进行了验证,使得谐振式轨道电路在长枕埋入式无碴轨道上传输特性的改善有了科学依据.