Study on dynamic characteristics of vehicle gearbox under multi-boundary conditions

With the development of vehicle gearbox to high-power-density and high-speed, how to predict and optimize the dynamic characteristics of vehicle gearbox becomes increasingly prominent. Aiming at the vehicle gearbox, this paper comprehensively and deeply studies the dynamic characteristics under the multi-boundary conditions. The generation mechanism of the multi-source excitations triggering the gearbox vibration is analyzed firstly. The vibration transfer path of the gearbox is explored. Secondly, the engine excitation, the gear meshing excitation and the bearing support load are numerically calculated. According to the finite element method, a fluid-solid coupling finite element model of the gearbox body is established to predict the gearbox dynamic responses based on the Galerkin method and the Hamiltonian variational principle. Finally, the effects of the excitation condition, oil height and reinforcement forms on the vibration responses of the gearbox body are thoroughly studied by simulation. The analysis indicates that it not only helps to modify and improve the method of forecasting the gearbox dynamic response, and also provides the theoretical and technical guidance for the gearbox design and optimization.     

Compensation of pressure enthalpy effects on temperature fields for throttling of high-pressure real gas

For the pressure enthalpy of high pressure pneumatics, the computational fluid dynamics (CFD) simulation based on ideal gas assumption fails to obtain the real temperature information. Therefore, we propose a method to compensate the pressure enthalpy of throttling for CFD simulation based on ideal gas assumption. Firstly, the pressure enthalpy is calculated for the pressure range of 0.101 to 30 MPa and the temperature range of 190 to 298 K based on Soave-Redlich-Kwong (S-R-K) equation. Then, a polynomial fitting equation is applied to practical application in the above mentioned range. The basic idea of the compensation method is to convert the pressure enthalpy difference between inlet air and nodes into the compensation temperature. In the above temperature and pressure range, the compensated temperature is close to the real one, and the relative temperature drop error is below 10%. This error is mainly caused by the velocity difference of the orifice between the real and ideal gas models. Finally, this compensation method performs an icing analysis for practical high pressure slide pilot valve.     

空气弹簧对车辆曲线通过性能的影响

建立了考虑左右空气弹簧垂向耦合模型的车辆系统数学模型,由理想气体的状态方程得到空气弹簧的力学方程,分析了车辆通过曲线时车辆与空气弹簧的动态特性。仿真结果表明:由于高度阀的动作,车辆在驶出曲线后各空气弹簧的压力不一致,导致车体不能回到静平衡位置;车辆以正常速度通过曲线时,车辆曲线通过动力学性能变化不大;在车辆多次通过同一种曲线的较恶劣工况时,空气弹簧内气压变化范围是一定的;增加抗侧滚刚度能明显抑制车体侧滚,从而减小空气弹簧内气压的变化量;增大空气弹簧横向跨距,并选择合适的刚度和阻尼,能使车辆驶出曲线后各空气弹簧压力接近静平衡值。     

55岁以上自然人群中帕金森病患者认知功能障碍的临床研究

目的　了解 55岁以上自然人群中帕金森病 (Parkinson sdisease ,PD)患者认知功能障碍的发生情况。方法　以流行病学调查资料为基础 ,采用非配对的病例对照研究方法 ,分析 55岁以上自然人群中PD患者认知功能障碍的发生率 ,评估认知功能障碍发生的相对危险性。结果　 55岁以上自然人群中 ,PD组和非帕金森病 (noParkinson sdis ease,NOPD)组认知功能障碍的发生率分别为 2 7.78%、5.55% ;年龄调整的发生率分别为 16.2 0 %、9.87%。与同一自然人群中NOPD组比较 ,PD组发生认知功能障碍的危险性明显增高 ,但主要增加低年龄组 (55～ 74岁 )中老年人发生认知功能障碍的危险性 (OR =8.59,95%CI :3 .13～ 2 3 .80 ) ;而且PD是低年龄中老年人发生认知功能障碍和痴呆的独立危险因素 (OR =6.2 7,95%CI :2 .3 5～ 19.2 7;OR =5.50 ,95%CI :1.52～ 19.94)。年龄调整的MMSE分值的均值PD组明显低于NOPD组 (P <0 .0 0 1)。结论　PD主要增加低年龄 (55～ 74岁 )中老年人认知功能障碍发生的危险性 ,而且PD认知功能障碍是疾病本身所致     

浅议高速公路沥青混凝土桥面排水的设计与施工

高速公路通车运营后产生的桥面损坏是沥青路面早期损坏的现象之一,结合沥青混凝土桥面施工过程中所取得的部分经验与教训,从设计和施工角度对沥青混凝土桥面结构排水、防水提出了一些方法和措施,以期提高沥青混凝土桥面的耐久性。     

氨氮废水处理技术发展现状

结合不同浓度氨氮废水的水质特点,评述了近二三十年来国内外主要的除氮技术,包括折点氯化法、吹脱法、离子交换法、化学沉淀法等物理化学法,以及传统生物处理技术和新型生物处理技术,如厌氧氨氧化、短程硝化反硝化、同时硝化反硝化等,并指出以上处理技术的适用条件及其优缺点和氨氮废水处理技术今后的发展趋势。     

论PLC在桥门式起重机改造中的应用

为解决桥门式起重机所频发的电气故障,将PLC应用于起重机电控系统中。介绍了PLC(可编程控制器)的性能特点和桥门式起重机电控系统的工作原理,介绍了用PLC控制器实现限位保护、综合保护、过流保护的设计技巧。     

上海东方饭店装配式结构的综合改造与加固

为满足业主对上海东方饭店建筑主体结构进行改造加固的要求,对原结构进行了现场检测和改造分析。提出加固改造的原则和总体思路,并详细介绍了其主要加固改造方案和加固技术。该工程的改造项目较多,对类似高层建筑的改造加固具有借鉴作用。     

烟台某工程循环水取、排水工程压水试验

为确定烟台某工程地基基岩的渗透特性,阐述水上岩体压水试验的主要操作过程、试验数据处理和试验结果分析评价方法．测定区域内的各岩层的透水率和渗透系数,给出不同风化程度岩层的渗透性评价,为设计提供防渗设计所需参数。     

基于模糊控制的车辆电控空气悬架系统研究

针对汽车车辆的空气悬架系统作了理论分析和计算机仿真研究,首先运用ADAMS建立了悬架的动力学模型和控制系统模型;然后运用模糊控制器对汽车空气悬架系统进行了模糊控制;对所创建的模型进行了SIMULINK仿真,取得了良好的仿真效果。