Model-based control system design in a urea-SCR aftertreatment system based on NH3 sensor feedback

This paper presents preliminary control system simulation results in a urea-selective catalytic reduction (SCR) aftertreatment system based on NH₃ sensor feedback. A four-state control-oriented lumped parameter model is used to analyze the controllability and observability properties of the urea-SCR plant. A model-based estimator is designed via simulation and a control system is developed with design based on a sliding mode control framework. The control system based on NH₃ sensor feedback is analyzed via simulation by comparing it to a control system developed based on NO_x sensor feedback. Simulation results show that the NH₃ sensor-based strategy performs very similarly in comparison to a NO_x sensor-based strategy. The control system performance metrics for NO_x index, urea index, urea usage, and NH₃ slip suggest that the NO_x sensor can be a potential alternative to a NO_x sensor for urea-SCR control applications.     

Performance of air conditioners with a gas-liquid separation condenser and one-tank laminated evaporator

In this study, a parallel flow condenser and laminated evaporator for an automotive air-conditioning system were modified to improve performance. Gas-liquid separation type condensers, in which the condenser and receiver drier are integrated, and one-tank laminated type evaporators were developed, and their performances were investigated experimentally using HFC-134a. Heat transfer characteristics in the condenser are examined by means of air temperature, air velocity entering the condenser and inlet pressure of the refrigerant; heat transfer characteristics in the evaporator are examined by means of air temperature, relative humidity, flow rate of air, outlet pressure of refrigerant and superheat. Pressure drops for both evaporator and condenser are also measured, and correlations for pressure drop are derived for the condenser and evaporator, respectively. Air velocity and mass flow rate of the refrigerant have a significant effect on the overall heat transfer coefficient, and flow pass is not significantly influenced by the cooling capacity of the condenser. The overall heat transfer coefficient of the evaporator increases as air flow rate, air temperature and relative humidity increases.     

美国桥梁技术近期发展概况

美国是公认的世界上交通运输网最广泛的国家.随着74 674 km国道系统的建成,并伴随着人们对于旅游和货物运输要求的持续增长,交通便利性已经成为了一种权利.全国统计在册的600 000座桥梁的平均桥龄为45年,这就为推进及推广应用桥梁技术的研究提供了巨大的机会,通过这些技术,可使公路基础设施更新中的桥梁更耐久、更经济,可采用更快速的施工技术及修建更可靠、更便于维护的结构.介绍美国桥梁技术近期发展概况.     

Application of large eddy simulation in the performance study of wave blocker

The configuration and aerodynamic performance of the inlet system are important aspects in the process of installing a gas turbine on a naval vessel. Under the requirements, large eddy simulation （LES） is used to simulate the three-dimensional fluid flow in the wave blocker of a marine inlet filter. The Smagorinsky-Lilly sub-grid model was used to model motions of small-scale structures. During numerical simulation, the SIMPLE algorithm was applied. The central-differencing spatial discretization scheme and the second order accuracy finite difference for the temporal discretization were used. Simulation gives satisfactory distribution of the vorticity fields and turbulent kinetic energy. Compared with the k-ε turbulent model, the results of LES are better for the distribution of parameters. The results of experimental study in a small-scale wind tunnel indicate that numerical calculation has higher accuracy. Therefore, the methods used are worthy of reference and introduction for the design of an inlet system.     

The measure and decision of technical risk in the development of naval vessels

The risks in development of navy vessels were explored, The resources of technical risk in the design and development of vessels were mentioned, It was pointed that technical risk dominated the other risk components. Based on the writers＇ understanding and experience from risk analysis and risk ,nanagement to the development of a navy vessel, four measure indexes of technical risk were presented. The decision criteria and the rules corresponding to the indexes were estahlished by the statistic information,     

Study of the helicopter blade running elevation measurement system

Helicopter blade running elevation measurement is an important measure target in helicopter blade dynamic balance experimentation. The elevation influences the helicopter＇ s security and other performance capabilities. In testing, however, it has been difficult to measure the elevation when the rotor reaches high speeds. To get a simple, fast and highly accurate measurement system, photo electricity technology was applied to measuring the blade running elevation. Discussed is the measurement principle of blade running elevation, tire design of the measurement system and analysis of the measurement precision.     

Sensitivity analysis and dynamic modification of modal parameter in mechanical transmission system

Sensitivity analysis is one of the effective methods in the dynamic modification. The sensitivity of the modal parameters such as the natural frequencies and mode shapes in undamped free vibration of mechanical transmission system is analyzed in this paper. In particular,the sensitivities of the modal parameters to physical parameters of shaft system such as the inertia and stiffness are given. A calculation formula for dynamic modification is presented based on the analysis of modal parameter. With a mechanical transmission system as an example, the sensitivities of natural frequencies and modes shape are calculated and analyzed. Furthermore, the dynamic modification is also carried out and a good result is obtained.     

Market based framework for multiple AUVs cooperation

A“Market” based framework for multiple AUVs team is introduced in this paper. It is a distributed meta-level task allocation framwork. The formulation and the basic concepts of the “Market” such as “goods” and “price” are discussed first, then the basic algorithm of the “auction”. The loosely coupled v-MDTSP tasks are considered as an example of the task allocation mission. A multiple AUV team controller and a detailed algorithm are developed for such applications. The simulation results show that the controller has the advantages such as robustness and low complexity and it can achieve better optimization results than the classical central controller （ such as GA） in some tasks. And the comparison of two different local solvers also implies that we should get the reasonable task allocation even not using the high quality algorithm, which can considerably decrease the cooperation computation.     

Institutional reform in ports of developing countries: the case of Lebanon—part I: the plan

Upon the expiry of the concession contract signed between Lebanon and a private company for the Port of Beirut operation (in December 1990), the Government appointed a temporary commission to operate the port under the rules of the expiring concession. The legality of this measure has since always been questioned, while the temporary commission underwent three major personnel changes which clearly prevented any long-term thinking or planning. In 1998, the temporary commission entered into a 20-year joint venture for the establishment of a container terminal. Meanwhile, Lebanon's two main ports were facing major regional competition, while competing against each other to some degree. Thus, the need became urgent to end the temporary status and propose reforms to the entire sector. To that end, the Ministry of Public Works and Transport was commissed by the Government to propose a permanent institutional framework for the port of Beirut while assessing the need for a national maritime sector regulator. This paper presents the recommendations for the institutional reform of the Lebanese maritime transport sector.     

Estimation of wave-induced ship hull bending moment from ship motion measurements

A time-domain technique for estimating wave-induced ship hull bending moment from ship motion measurements is presented. This technique is developed to improve hull response monitoring systems. Artificial neural networks are used to model the time-domain relationship between the wave-induced vertical bending moment and the coupled heave and pitch motions. The application of the proposed technique is validated using experimental data.