Analysis of wheel speed vibrations for road friction classification

ABSTRACT

With higher level of vehicle automation, it becomes increasingly important to know the maximum possible tyre forces during normal driving. An interesting method in this respect is estimating the tyre–road friction from the resonance peak in the wheel speed signal, excited by road roughness. A simulation environment using the MF-Swift tyre model is proposed, which gives insight in the correctness and functioning of this method. From implementing the estimation algorithm and considering the tyre torsional vibration system, it is concluded that frequencies and damping ratios can be estimated with reasonable accuracy and that the trends observed with changing road friction are consistent. Furthermore, the proposed simulation environment gives opportunity to investigate other issues like robustness of the estimation method to road roughness. Additionally, the tyre modelling aspect of the estimation method is analysed and improvements are proposed.     

Performance evaluation of slim low-risk-deployment dual-type passenger airbag system with dispersed inflation pressure

Motor vehicle passenger airbags have been proven to be effective for reducing the possibility of passenger injury during a crash. However, the inflation of the airbag sometimes causes serious injury when a passenger is positioned close to the airbag. The United States Federal Motor Vehicle Safety Standard (FMVSS) 208 requires the use of a low-riskdeployment (LRD) passenger airbag system. This paper proposes a newly developed airbag system comprising two slim airbags mounted on the instrument panel. A series of tests were conducted using the FMVSS 208 test procedures to demonstrate the effectiveness of the proposed system. It was found that the system not only satisfied the injury criteria of FMVSS 208, but was also effective for protecting passengers of all sizes.     

Effect of regenerative braking energy on battery current balance in a parallel hybrid gasoline-electric vehicle under FTP-75 driving mode

In recent years, a hybrid electric vehicle (HEV) has been considered a successful technology. Especially, in case of a full HEV, the motor can drive the vehicle by itself at low velocity or assist the engine at high load. To improve the hybrid electric vehicle’s efficiency, a regenerative braking system is also applied to recover from kinetic energy. In this study, an experimental control apparatus was set up with a parallel hybrid electric vehicle mounted on a chassis dynamometer to measure ECU (engine control unit) and MCU (motor control unit) signals, including the current and state of charge in the battery. In order to analyze regenerative braking characteristics, user define braking driving cycle was introduced and carried out using different initial velocities and braking times. The FTP 75 driving cycle was then adapted under different initial SOC (state of charge) levels. The experiment data was analyzed in accordance with the vehicle velocity, battery current, instant SOC level, motor RPM, engine RPM, and then vehicle driving mode was decided. In case of braking driving cycle, it was observed that SOC were increased up to 1.5 % when the braking time and the velocidy were 6 second and 60 km/h, respectively. In addition, using the FTP 75 driving cycle, mode 1 was most frequently operated at SOC 65 conditions in phase 1. In phase 2, due to frequent stop-go hills, percentage of mode 1 was increase by 22 %. Eventually, despite of identity, it was shown that the characteristics of phase 3 differed from phase 1 due to the evanishment of the effects of initial SOCs.     

Development of route information based driving control algorithm for a range-extended electric vehicle

A route information based driving control algorithm was developed for an RE-EV which consists of two motorgenerators, MG1 and MG2. A threshold power which controls the engine on/off to charge the battery was obtained by an optimization process using route information, such as the vehicle velocity and altitude. The threshold power allows the vehicle to travel to the final destination while making the final battery SOC close to SOC _low. Using the threshold power, route based control (RBC) was proposed by considering the driver’s characteristics and traffic conditions using the driving data base. In addition, a relationship between the threshold power and various initial battery SOC was obtained by off-line optimization. The performance of the RBC was evaluated by simulation and human-in-the-loop simulation (HILS) for city driving. It was found from the simulation and HILS results that the RBC achieved approximately 4 % to 12 % reduction in fuel consumption compared to the existing charge depleting/charge sustaining (CD/CS) driving control.     

Kriging assisted on-line torque calculation for brushless DC motors used in electric vehicles

Torque is one of the most important control factors for a vehicle’s motion. Compared with internal combustion engines, electric motors can have a more accurate torque feedback which brings a lot of advantages to vehicle dynamics and stability control. However, motors used in electric vehicles are facing more difficult conditions than those in conventional applications, such as extreme high/low temperature changing, vibration, aging, etc. The variation of motor parameters due to harsh working conditions can lead to serious problems for motor torque estimation and thus dynamic control of electric vehicles. In this paper, a new method using kriging to estimate the back EMF and thus accurately calculate motor torque in an on-line fashion is presented. With motor speed and rotor position as inputs, kriging predicts back EMF as the output that is used to calculate the motor torque with three phase currents. Using this novel method, motor torque can be accurately calculated even facing high/low temperatures or aging conditions. Experimental tests under the high temperature have been conducted to verify the applicability of the proposed method.     

Influence of turpentine addition in Jatropha biodiesel on CI engine performance,combustion and exhaust emissions

The prospect of using turpentine oil as an additive for Jatropha biodiesel and using it as an alternative fuel for diesel in CI engines has been experimented in this work. Tests were carried out in a single cylinder, air cooled, constant speed, direct injection diesel engine. The results display that the performance of Jatropha-Mineral Turpentine (JMT) and Jatropha- Wood Turpentine (JWT) blends were found close to diesel, emission features were enhanced and combustion parameters were noticed to be comparable with diesel. Brake thermal efficiency of JMT20 blend found closer to diesel at 75 % load. BSFC increases for JMT and JWT blends at part load and maintains at full load. CO, HC and Smoke emissions were reduced with JMT and JWT blends at 75 % load. NOx emissions were on the raise. Furthermore, JMT and JWT blends offered comparable performance and combustion parameters, reduced emissions and both can substitute standard diesel in CI engines.     

Lateral stability control of dynamic steering for dual motor drive high speed tracked vehicle

In this paper, the torque and power required by dual motors for electric tracked vehicle during dynamic steering maneuvers with different steering radiuses are analyzed. A steering coupling drive system composed of a new type of center steering motor, two Electromagnetic (EM) clutches, two planetary gear couplers, and two propulsion motors is proposed for the dual motors drive high speed electric tracked vehicle (2MHETV), which aims to improve its lateral stability. An average torque direct distribution control strategy based on steering coupling and an optimization-distribution-based close-loop control strategy are designed separately to control the driving torque or regenerative braking torque of two propulsion motors for vehicle stability enhancement. Then models of the 2MHETV and the proposed control strategy are established in Recudyn and Matlab/Simulink respectively to evaluate the lateral stability of dynamic steering for the 2MHETV with different steering radiuses on hard pavement.The simulation results show that the lateral stability of the 2MHETV can be significantly improved by the proposed optimization-distribution-based close-loop control strategy based on steering coupling system.     

Non-intrusive polynomial chaos for efficient uncertainty analysis in parametric roll simulations

Monte Carlo analyses are generally considered the standard for uncertainty analysis. While accurate, these analyses can be expensive computationally. Recently, polynomial chaos has been proposed as an alternative approach to the estimation of uncertainty distributions (Hosder et al. A non-intrusive polynomial chaos method for uncertainty propagation in CFD simulations. In: 44th AIAA aerospace sciences meeting and exhibit, Reno, Nevada, 2006; Wu et al. Uncertainty analysis for parametric roll using non-intrusive polynomial chaos. In: Proceedings of the 12th international ship stability workshop, Washington, DC, USA, 2011). This approach works by representing the function as a series of orthogonal polynomials; the weights for which can be calculated via several methods. Previous studies have demonstrated the usefulness of this technique for comparatively simple systems such as parametric roll modeled by the Mathieu equation with normally distributed parameter values (Wu et al. Uncertainty analysis for parametric roll using non-intrusive polynomial chaos. In: Proceedings of the 12th international ship stability workshop, Washington, DC, USA, 2011). In the present work, a polynomial chaos method is applied to a nonlinear computational ship dynamics model with normally distributed input parameters. Test cases were selected where parametric roll was expected to potentially occur. The resulting probability distributions are compared to the results of a Monte Carlo analysis. In general, these results demonstrate good agreement between Monte Carlo simulation and polynomial chaos in the absence of capsize with significant computation gains found with polynomial chaos. Overall, we conclude that polynomial chaos is an effective tool for reducing simulation time costs when studying parametric roll, and potentially other ship dynamics phenomena, particularly in the absence of capsize-like bifurcations.     

SiMoCo: the viability of a prototype platform for a coastal monitoring system: a case study

Coastal zones are among the most productive areas in the world, offering a wide variety of valuable habitats and ecosystems services. Despite the low population density in the Brazilian coastal zone, their distribution is quite concentrated near some coastal cities and state capitals. This concentration places enormous pressure on coastal resources. Therefore, the main objective of this paper is to present an overview on the current status of SiMoCo (Sistema de Monitoramento Costeiro, or Coastal Monitoring System in English) project as a possible early warning system that can be integrated to the Brazilian Coastal Management Information System. This prototype platform provides a real-time access to the composition, organization and simulation of planktonic communities. First, our results demonstrate such a system detecting a target dinoflagellate; second, we apply structural and functional indexes to compare and characterize the ecological networks from two different coastal areas. Conclusions are made about SiMoCo’s feasibility and its possible contribution to the decision-making process within integrated coastal zone management (ICZM) strategies.