Characteristic flow patterns generated by macrozoobenthic structures

A laboratory flume channel, equipped with an acoustic Doppler flow sensor and a bottom scanning laser, was used for detailed, non-intrusive flow measurements (at 2 cm s^− 1 and 10 cm s^− 1) around solitary biogenic structures, combined with high-resolution mapping of the structure shape and position. The structures were replicates of typical macrozoobenthic species commonly found in the Mecklenburg Bight and with a presumed influence on both, the near-bed current regime and sediment transport dynamics: a worm tube, a snail shell, a mussel, a sand mound, a pit, and a cross-stream track furrow. The flow was considerably altered locally by the different protruding structures (worm tube, snail, mussel and mound). They reduced the horizontal approach velocity by 72% to 79% in the wake zone at about 1–2 cm height, and the flow was deflected around the structures with vertical and lateral velocities of up to 10% and 20% of the free-stream velocity respectively in a region adjacent to the structures. The resulting flow separation (at flow Reynolds number of about 4000 and 20,000 respectively) divided an outer deflection region from an inner region with characteristic vortices and the wake region. All protruding structures showed this general pattern, but also produced individual characteristics. Conversely, the depressions (track and pit) only had a weak influence on the local boundary layer flow, combined with a considerable flow reduction within their cavities (between 29% and 53% of the free-stream velocity). A longitudinal vortex formed, below which a stagnant space was found. The average height affected by the structure-related mass flow rate deficit for the two velocities was 1.6 cm and 1.3 cm respectively (80% of height and 64%) for the protruding structures and 0.6 cm and 0.9 cm (90% and 127% of depth) for the depressions. Marine benthic soft-bottom macrozoobenthos species are expected to benefit from the flow modifications they induce, particularly in terms of food particle capture due to altered particle pathways and residence times, but also for the exchange of gases, solutes and spawn. The present results confirm previous studies on flow interaction effects of various biogenic structures, and they add a deeper level of detail for a better understanding of the fine-scale effects.     

The structure of dissipation in the western Irish Sea front

We report on an intensive campaign in the summer of 2006 to observe turbulent energy dissipation in the vicinity of a tidal mixing front which separates well mixed and seasonally stratified regimes in the western Irish Sea. The rate of turbulent dissipation ε was observed on a section across the front by a combination of vertical profiles with the FLY dissipation profiler and horizontal profiles by shear sensors mounted on an AUV (Autosub). Mean flow conditions and stratification were obtained from a bed mounted ADCP and a vertical chain of thermistors on a mooring. During an Autosub mission of 60 h, the vehicle, moving at a speed of ~ 1.2 m s^− 1, completed 10 useable frontal crossings between end points which were allowed to move with the mean flow. The results were combined with parallel measurements of the vertical profile of ε which were made using FLY for periods of up to 13 h at positions along the Autosub track. The two data sets, which show a satisfactory degree of consistency, were combined to elucidate the space–time variation of dissipation in the frontal zone. Using harmonic analysis, the spatial structure of dissipation was separated from the strong time dependent signal at the M₄ tidal frequency to yield a picture of the cross-frontal distribution of energy dissipation. A complementary picture of the frontal velocity field was obtained from a moored ADCP and estimates of the mean velocity derived from the thermal wind using the observed density distribution. which indicated the presence of a strong (0.2 m s^− 1) jet-like flow in the high gradient region of the front. Under neap tidal conditions, mean dissipation varied across the section by 3 orders of magnitude exceeding 10^− 2 W m^− 3 near the seabed in the mixed regime and decreasing to 10^− 5 W m^− 3. in the strongly stratified interior regime. The spatial pattern of dissipation is consistent in general form with the predictions of models of tidal mixing and does not reflect any strong influence by the frontal jet.     

Quasi-two-dimensional flow on the polar β-plane: Laboratory experiments

Geophysical turbulence is strongly affected by the variation of the Coriolis parameter with latitude. This variation results in the so-called β-effect, which forces energy from small-scales to be transferred preferentially into zonal motions. This effect results in the formation of narrow jet-like zonal flows that dominate the dynamics and act as transport barriers. Here, laboratory experiments are used to reproduce this effect in decaying turbulent flows. An electromagnetic cell is used to generate an initial field of vorticity in a rotating tank. Under conditions of quasi-geostrophic flow, the β-effect is produced by depth variation of the flow instead of variation of the Coriolis parameter. The effects of changing the container geometry and the overall fluid depth on the production of jets are investigated. The results suggest that this laboratory configuration can be used to model jet formation in the oceans and that increasing fluid depth is a practical way to decrease viscous effects.     

Non-local simulation of the stable boundary layer with a third order moments closure model

A new higher order closure model for the stable boundary layer is presented and compared with Large Eddy Simulation data. The model includes numerical solutions for the mean values, second and third order moments equations. A satisfactory agreement is found between the calculated vertical profiles of the turbulent quantities with those provided by the LES. Furthermore the new model results are compared with profiles obtained with a lower order closure model in order to verify the effective importance of including third order dynamical equations in the model.     

An algorithm for oceanic front detection in chlorophyll and SST satellite imagery

An algorithm is described for oceanic front detection in chlorophyll (Chl) and sea surface temperature (SST) satellite imagery. The algorithm is based on a gradient approach: the main novelty is a shape-preserving, scale-sensitive, contextual median filter applied selectively and iteratively until convergence. This filter has been developed specifically for Chl since these fields have spatial patterns such as chlorophyll enhancement at thermohaline fronts and small- and meso-scale chlorophyll blooms that are not present in SST fields. Linear Chl enhancements and localized (point-wise) blooms are modeled as ridges and peaks respectively, whereas conventional fronts in Chl and SST fields are modeled as steps or ramps. Examples are presented of the algorithm performance using modeled (synthetic) images as well as synoptic Chl and SST imagery. After testing, the algorithm was used on > 6000 synoptic images, 1999–2007, to produce climatologies of Chl and SST fronts off the U.S. Northeast.     

Influence of the slice position on chloride migration tests for concrete in marine conditions

Chloride migration tests are used to measure the concrete capacity to inhibit chloride attack. Many researchers carry out this test in a slice of concrete extracted from the central part of cylindrical specimens, discarding about 75% of the concrete used to mold the specimens. This fact generated the question: would it be possible to extract more slices from a same specimen without losing the confidence in the results? The main purpose of this work is to answer this question. Moreover, another aim of this study was to show the difference of chloride penetration between finished faces and the formwork surfaces of concrete beams and slabs. The results indicated that it is possible to use more slices of a single specimen for a chloride migration test. Moreover, it was demonstrated that there is a significant difference of chloride penetration between the finished surface and the formwork surface of the specimens.     

Home-to-work commuting,urban form and potential energy savings: A local scale approach to regional statistics

The link between transport energy consumption and land use patterns has been the focus of a considerable amount of academic works over the past decades. While many empirical researches are backed up with solid statistical techniques, most of them do not fully consider the influence of scale underlying empirical quantitative investigations. Using fine-scale home-to-work commuting data for Wallonia (Belgium), this paper re-evaluates Breheny’s (1995) assertion that urban structure should hold the characteristics of major cities if substantial energy savings are to be achieved. A local scale approach highlights efficient settlements in terms of transport energy consumption not only within major towns, but also within remote rural areas. Furthermore, results suggest that influencing the urban form following local energy efficient examples rather than regional ones could also yield significant gains, without an extreme policy stance of re-urbanisation in major cities.     

An analysis of destination choice for opaque airline products using multidimensional binary logit models

We investigate how customers respond to an opaque airline product offered by a European carrier. In this opaque product design, customers are randomly assigned to travel to one of approximately ten destinations; however, for a fee they may exclude one or more destinations from the choice set (or a particular package design) prior to learning which destination they will travel to. We use a multidimensional binary logit model to predict the probability that one or more alternatives will be chosen by a customer. Results show that customers are more likely to pay to exclude destinations located close to the origin airport and destinations that speak the same language as the origin airport. Length of stay, cost of living at the destination, and measures of destination attractiveness are also found to be significant predictors for some package designs. Based on these findings, we offer general recommendations for how to design opaque packages for airline customers.     

Local Level Fisheries Management in Diani-Chale,Kenya: Current Status and Future Directions

The current regime of fisheries management and the prospects for attaining a more locally oriented, collaborative system of fisheries management in Diani-Chale, Kenya are examined. At present fisheries management in Diani-Chale is characterized by diminished government capacity for regulation, weakened local institutions, and little ability to exert control over the use of fisheries. Local level management requires the development and use of local institutions that can govern the use of fishery resources. The fish landing sites used by fishers and their associated fishing grounds were identified to be at the appropriate level for resolving fishery management issues. A more formal role for these entities, the clarification of fishing ground tenure and access rights, and support for the development and enforcement of local fishing rules can further local management. The socioeconomic condition of fishers, their fear of losing landing sites, and the continued perception of the imposition of a marine reserve pose barriers to initiatives seeking to further local level management.     

Some Difficulties inherent in applying Congestion Theory to Marine Problems

This paper sets out to evaluate the main areas of focus within maritime sociology and to link more closely than hitherto the various substantive discussions with general theoretical and conceptual approaches. More specifically, it suggests directions in which maritime sociology may be advanced at both empirical and conceptual levels in the future.