New approach for performing failure analysis of fuel cell-powered vehicles

Safety of hybrid-electric and fuel cell vehicles is a critical aspect of these new technologies, since any accident exposing occupants of such vehicles to unconventional hazards may result in significant setbacks to successful market penetration. Fuel cell and hybrid-electric drive systems are complex, and it is essential to perform a thorough analysis to determine critical failure conditions. There are several safety concerns for routine operation of such systems, particularly for hydrogen-fueled vehicles. A modified Failure Modes and Effect Analysis (FMEA) has been developed, along with a Criticality Analysis (CrA), to identify potentially hazardous conditions for crash and non-crash situations. A mathematical model of fuel cell operation has been developed and used here in conjunction with the FMEA. Component failures during the event modes are simulated using vehicle models developed with Matlab Simulink tools. Six simulation models were created using the software. In addition, a preliminary finite element model of a fuel cell vehicle, using a Ford Taurus (91′) model year sedan, has been developed and implemented. This finite element model is used as a demonstration of the crash simulation of the vehicle.     

Experimental investigation using CFD for thermal performance of ventilated disc brake rotor

In the present work, different ventilated disc brake rotor configurations were analysed to enhance the heat transfer rate and obtain the uniform temperature distribution in the rotor. CFD code used in this work was validated at using experimental results obtained by conducting experiments on a test rig. The experimental analysis was performed to calculate the mass flow rate and heat dissipation through the rotor. Further, different types of rotor configurations viz. straight radial vane (SRV), tapered radial vane (TRV), alternate long and short vane (ALSV), variable diameter circular pillars (VDCP) were considered for the analysis. A rotor segment of 20° was considered for the numerical analysis due to its rotational symmetry. CFD results were in good agreement with the experiments. The maximum deviation of the numerical results were about 12 % from the experimental results. It is found from the analysis that among the different types of rotor configurations; variable diameter circular pillars (VDCP) rotor gives better rate of heat dissipation with more uniform temperature distribution in the flow passages. Hence for modern high speed vehicles VDCP rotor may be more appropriate.     

Prospects for plug-in hybrid electric vehicles in the United States and Japan: A general equilibrium analysis

The plug-in hybrid electric vehicle (PHEV) may offer a potential near term, low-carbon alternative to today’s gasoline- and diesel-powered vehicles. A representative vehicle technology that runs on electricity in addition to conventional fuels was introduced into the MIT Emissions Prediction and Policy Analysis (EPPA) model as a perfect substitute for internal combustion engine (ICE-only) vehicles in two likely early-adopting markets, the United States and Japan. We investigate the effect of relative vehicle cost and all-electric range on the timing of PHEV market entry in the presence and absence of an advanced cellulosic biofuels technology and a strong (450 ppm) economy-wide carbon constraint. Vehicle cost could be a significant barrier to PHEV entry unless fairly aggressive goals for reducing battery costs are met. If a low-cost PHEV is available we find that its adoption has the potential to reduce CO₂ emissions, refined oil demand, and under a carbon policy the required CO₂ price in both the United States and Japan. The emissions reduction potential of PHEV adoption depends on the carbon intensity of electric power generation. Thus, the technology is much more effective in reducing CO₂ emissions if adoption occurs under an economy-wide cap and trade system that also encourages low-carbon electricity generation.     

Host specificity in copepod parasites of deep-sea fishes

Parasitic copepods belonging to two orders, Siphonostomatoida and Poecilostomatoida, are frequently reported from fish hosts in the deep sea. Three families of copepods are most commonly encountered, Sphyriidae, Lernaeopodidae and Chondracanthidae, but members of another four families, Hatschekiidae, Pennellidae, Philichthyidae and Hyponeoidae, are occasionally recorded. These parasites utilise various deep demersal fishes as hosts, especially species of the most abundant families, Macrouridae, Moridae, Synaphobranchidae and Alepocephalidae. Host specificity levels are variable, as for shallow-water fishes. In contrast, few parasites are regularly reported from fishes inhabiting the pelagic water column away from the bottom and away from the near-surface zone. Only the pennellids Sarcotretes scopeli and Cardiodectes medusaeus appear common on pelagic fishes, in the Atlantic and Pacific respectively. Host specificity levels in these two pennellid species are relatively low. It is speculated that the difficulty of encountering a host in the vast pelagic biome has restricted the diversity of parasitic copepods that have successfully colonized pelagic fishes.     

Access control policies without inside queues: Their properties and public policy implications

An access control policy that eliminates all queues beyond the entry points to a network has obvious benefits, which include smooth travel and predictable travel times inside the network. Yet it has never been proven, to the best of our knowledge, whether excluding inside queues yields sub-optimal network performance or, in other words, allowing inside queues can actually further reduce the system travel cost. Moreover, it is not clear whether an optimal control policy derived from efficiency considerations can also be a fair policy to all road users. This paper provide answers to these questions in the context of a monocentric network. By analyzing the structure of the access control problem considering all feasible policies (with/without inside queues), we show that the minimal system cost realizable by access control can be obtained without directly solving a non-convex optimization program, and can indeed always be achieved by a control policy excluding all of the inside queues. These optimal policies are defined by a polyhedral set and a Finite Generation Algorithm can be applied to derive the analytical form of this set. The optimal policies are not unique in general, thus making it possible to achieve both minimal system cost and fairness simultaneously.     

Parameter transfer of common-metric attributes in choice analysis: implications for willingness to pay

There is a growing literature that promotes the presence of a mix of compensatory and semi-compensatory processing strategies in the way that individuals evaluate packages of attributes in real or hypothetical markets, and make choices. This paper proposes a specification for the utility form in a choice model to test if, given a pair of attributes with a common-metric (e.g., components of travel time or cost), the attribute with the dominating level defines the marginal (dis)utility that is assigned to both attributes. We refer to this processing strategy as a parameter transfer rule. We use a stated choice data set, in the context of car driving individuals choosing between tolled and non-tolled routes, to estimate a mixed logit model which incorporates the presence of the parameter transfer rule and the conventional fully compensatory rule, both existing up to a probability. We find that if this parameter transfer heuristic is part of the mix, the WTP is more than 30% higher, on average, than when only a fully compensatory rule is imposed. We also contrast the parameter transfer rule with other semi-compensatory heuristics which have been investigated in other papers, and show that the finding adds further support to the accumulating evidence that a semi-compensatory attribute processing rules tend to result in higher mean WTP estimates compared to the fully compensatory attribute processing rule.     

Tests on ultimate strength of hull box girders made of high tensile steel

The experimental results of the collapse of three box girders subjected to pure bending moment are presented. The structures are made of high tensile steel of 690 MPa of nominal yield stress reinforced with bar stiffeners of the same material. The moment curvature curves are presented covering the pre- and post-collapse regions. The modes of collapse for each box girder are discussed considering the variation on the panel's slenderness. The concept of efficiency of high tensile steel structures is introduced. The concept is very useful to identify the governing parameters affecting the ultimate strength of 3D structures under predominant bending moment.     

Socio-demographic and built environment influences on the odds of being overweight or obese: The Atlanta experience

This paper explores the association of socio-demographic and built environment characteristics on the odds of being overweight and obese using data from the Atlanta SMARTRAQ travel survey. A new methodological framework based on a multinomial logit (MNL) model and an enhanced odds ratio plot is presented. The use of an MNL model overcomes limitations of many prior studies that employ a sequence of binary logit models to examine multiple weight categories. The use of an enhanced odds ratio plot provides important information into the relative importance of socio-demographic and built environment characteristics. Several new findings for the Atlanta area result from this study. Socio-demographic variables, including age and educational attainment, exhibit a non-linear relationship with the odds of being overweight or obese. Gender, age, ethnicity, and educational attainment are strongly associated with the odds of being overweight or obese, while income and number of students between 5 and 16 years old in the household have smaller effects. Built environment characteristics such as increased net residential densities and enhanced street connectivity are associated with reductions in the odds of being overweight and/or obese. Relative to socio-demographic variables, however, such built environment characteristics have a much smaller impact on describing the odds of being overweight or obese.