Characteristic flow patterns generated by macrozoobenthic structures

A laboratory flume channel, equipped with an acoustic Doppler flow sensor and a bottom scanning laser, was used for detailed, non-intrusive flow measurements (at 2 cm s^− 1 and 10 cm s^− 1) around solitary biogenic structures, combined with high-resolution mapping of the structure shape and position. The structures were replicates of typical macrozoobenthic species commonly found in the Mecklenburg Bight and with a presumed influence on both, the near-bed current regime and sediment transport dynamics: a worm tube, a snail shell, a mussel, a sand mound, a pit, and a cross-stream track furrow. The flow was considerably altered locally by the different protruding structures (worm tube, snail, mussel and mound). They reduced the horizontal approach velocity by 72% to 79% in the wake zone at about 1–2 cm height, and the flow was deflected around the structures with vertical and lateral velocities of up to 10% and 20% of the free-stream velocity respectively in a region adjacent to the structures. The resulting flow separation (at flow Reynolds number of about 4000 and 20,000 respectively) divided an outer deflection region from an inner region with characteristic vortices and the wake region. All protruding structures showed this general pattern, but also produced individual characteristics. Conversely, the depressions (track and pit) only had a weak influence on the local boundary layer flow, combined with a considerable flow reduction within their cavities (between 29% and 53% of the free-stream velocity). A longitudinal vortex formed, below which a stagnant space was found. The average height affected by the structure-related mass flow rate deficit for the two velocities was 1.6 cm and 1.3 cm respectively (80% of height and 64%) for the protruding structures and 0.6 cm and 0.9 cm (90% and 127% of depth) for the depressions. Marine benthic soft-bottom macrozoobenthos species are expected to benefit from the flow modifications they induce, particularly in terms of food particle capture due to altered particle pathways and residence times, but also for the exchange of gases, solutes and spawn. The present results confirm previous studies on flow interaction effects of various biogenic structures, and they add a deeper level of detail for a better understanding of the fine-scale effects.     

On the numerical accuracy of the prediction of resistance coefficients in ship stern flow calculations

This article presents a study on the accuracy of the numerical determination of the friction and pressure resistance coefficients of ship hulls. The investigation was carried out for the KVLCC2 tanker at model- and full-scale Reynolds numbers. Gravity waves were neglected, i.e., we adopted the so-called double-model flow. Single-block grids with H–O topology were adopted for all the calculations. Three eddy viscosity models were employed: the one-equation eddy viscosity and the two-equation models proposed by Menter and the TNT version of the two-equation k-ω model. Verification exercises were performed in sets of nearly geometrically similar grids with different densities in the streamwise, normal, and girthwise directions. The friction and pressure resistance coefficients were calculated for different levels of the iterative error and for computational domains of different size. The results show that on the level of grid refinement used, it is possible to calculate the viscous resistance coefficients in H–O grids that do not match the ship contour with a numerical uncertainty of less than 1%. The differences between the predictions of different turbulence models were larger than the numerical uncertainty; however, these differences tended to decrease with increases in the Reynolds number. The pressure resistance was remarkably sensitive to domain size and far-field boundary conditions. Either a large domain or the application of a viscous–inviscid interaction procedure is needed for reliable results. This work was presented in part at the International Conference on Computational Methods in Marine Engineering—MARINE 2007, Barcelona, June 3–4, 2007.     

Influence of the slice position on chloride migration tests for concrete in marine conditions

Chloride migration tests are used to measure the concrete capacity to inhibit chloride attack. Many researchers carry out this test in a slice of concrete extracted from the central part of cylindrical specimens, discarding about 75% of the concrete used to mold the specimens. This fact generated the question: would it be possible to extract more slices from a same specimen without losing the confidence in the results? The main purpose of this work is to answer this question. Moreover, another aim of this study was to show the difference of chloride penetration between finished faces and the formwork surfaces of concrete beams and slabs. The results indicated that it is possible to use more slices of a single specimen for a chloride migration test. Moreover, it was demonstrated that there is a significant difference of chloride penetration between the finished surface and the formwork surface of the specimens.     

Water entry of a bow-flare ship section with roll angle

The two-dimensional water entry of a bow-flare ship section with constant roll angle, or heel angle, was studied by using a boundary element method. The fully nonlinear free surface conditions and exact body boundary conditions were satisfied. Nonviscous flow separation from the knuckles of the section or from the curved bottom could be simulated. The numerical calculations were compared with existing experimental results. First, the effects of roll angle were investigated and then the characteristics associated with large roll angles were examined in particular. The evolution of the free surfaces and the pressure distributions on the section surface are illustrated and the influence of nonviscous flow separation from the leeward section surface is discussed.     

Effect of Seismic Parameters on the Safety Factor for an Underground Cavern北大核心CSCD

In order to quantitatively evaluate the safety of the surrounding rock of an underground cavern under seis-mic load, a comprehensive evaluation method for the stability of surrounding rock is proposed based on the general safety factor and point safety factor. A calculation method for the general safety factor of a cavern based on the prin-ciple of shear strength reduction of a rock mass is given, the run-through of the plastic zone between the main power-house and main transformer room is presented as a critical criterion for the overall instability of the cavern, and the general safety factor is obtained by searching for the reduction coefficient. A point safety factor calculation method based on the Mohr-Coulomb yield criterion is given. The influence of different seismic input parameters on the general safety factor of the cavern and the point safety factor of key positions are studied based on an underground power-house cavern of a hydropower station in Southwest China. The results show that the quantitative evaluation method for the stability of the surrounding rock based on the safety factor is feasible and can reflect the general safety de-gree and local safety degree of different positions of the cavern for different working conditions. It is found that the general safety factor of the cavern and the point safety factor of key positions decrease with an increase of the ampli-tude and duration of a seismic wave while they increase with an increase of the incident angle; additionally, the low frequency of a seismic wave has a great influence on the cavern while the high frequency has little effect. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Innovative strategies for urban car-sharing systems and a simulator to assess their performance

In this paper, three innovative car-sharing systems for urban areas are proposed, based on fleets of individual intelligent vehicles with three service characteristics: instant access, open-ended reservations and one-way trips. These features provide high flexibility but create an uneven distribution of vehicles among stations. Therefore, relocation of vehicles must be performed. Three different system procedures are proposed: in the first system, relocations are performed by users; in the other two, vehicles relocate automatically, thanks to their automation. In the first two systems, vehicles are accessible only at stations, whereas in the third they are also accessible along roads. In order to provide transport managers with a tool to test systems in different realities, an object-oriented simulator is developed. The simulation provides outputs of system performance, in terms of user waiting times and system efficiency. The proposed systems are simulated for the city of Genoa, in Italy, and a comparative analysis is presented.     

Analysis of factors that may be essential in the decision to fly on fully autonomous passenger airliners

This research investigates factors that influence opinion in the decision to fly on fully autonomous passenger airliners primarily from the perspective of aviation and technology professionals. Bayesian statistical inference and a two‐level fractional factorial survey are used to sample passengers' views on fully autonomous airliners. Eight trust, safety, and cost factors are incorporated into a vignette set in the future. Factors include automation levels, safety records, liability guarantees, airline integrity, and service disruptions. Dependent variables exist in five post‐vignette questions and essentially ask “Would you” or “Would you not” be willing to fly on a fully autonomous airliner? Sixteen versions of the vignette, each with unique trust, safety, and cost levels, present varying (unknown) degrees of influence to the survey respondents. For every demographic, the research shows a 99% statistically significant difference between the “prior” and “posterior” sampled population proportions willing to fly. The most significant positive influence involves integrity characteristics of the airline, while the most negative influence relates to life insurance liability guarantees. Research from 2003 suggested that this mode of travel would be acceptable to only 10.5% of respondents. When the 2003 research is used as a Bayesian prior probability, the resulting posterior probability for the demographics sampled can be modeled as a beta distribution, indicating 95% probability that the sampled proportion of the population willing to fly is between 33.2% and 36.4%. After adjusting for age and profession demographics to match the US population, the 95% probability bounds on the proportion willing to fly are 31.35% and 34.15%. Copyright © 2015 John Wiley & Sons, Ltd.     

Understanding members' carsharing (activity) persistency by using econometric model

Carsharing is an innovative travel alternative that has recently experienced considerable growth and become part of sustainable transportation initiatives. Although carsharing is becoming increasingly a popular alternative transportation mode in North America, it is still an under‐researched area. Current research is aimed at better understanding of the behavior of carsharing users. For every member, a two‐stage approach microsimulates the probability of being active in any month using a binary probit model and given that a particular member is active during a month, the probability of that member using the service multiple times using a random utility‐based model. The model is estimated using empirical data from one of the largest carsharing companies in North America. The model estimates reveal that the activity persistency of members is positively linked to previous behaviors for up to 4 months, and that the influence of previous months weakens over time. It also shows that some attributes of the traveler (gender, age, and language spoken at home) impact his or her behaviors. Copyright © 2010 John Wiley & Sons, Ltd.     

Interactive stated choice surveys: a study of air travel behaviour

Stated preference (SP) experiments are becoming an increasingly popular survey methodology for investigating travel behaviour. Nevertheless, some evidence suggests that SP experiments do not mirror decisions in real markets. With an increasing number of real world decisions made using the internet, an opportunity exists to improve the realism of the SP counterparts of such choices by aligning the choice environment with such online portals. In this paper, we illustrate the benefits of such an approach in the context of air travel surveys. Our survey is modelled on the interface and functionality of an online travel agent (OTA). As with a real OTA, many ticket options are presented. Sort tools allow the options to be reordered, search tools allow options to be removed from consideration, and a further tool allows attributes to be hidden and shown. Extensive use of these tools is made by the 462 respondents. A traditional SP component was also completed by the respondents. Our exploratory analysis as well as random utility model estimation results confirm not only that respondents seem to engage more actively with the interactive survey, but also that the resulting data allows for better performance in model estimation compared to a more conventional SP experiment. These results have implications for the study of other complex travel choices where interactive surveys may similarly be preferable to standard approaches.     

Understanding the impacts of a combination of service improvement strategies on bus running time and passenger’s perception

Transit agencies implement many strategies in order to provide an attractive transportation service. This article aims to evaluate the impacts of implementing a combination of strategies, designed to improve the bus transit service, on running time and passenger satisfaction. These strategies include using smart card fare collection, introducing limited-stop bus service, implementing reserved bus lanes, using articulated buses, and implementing transit signal priority (TSP). This study uses stop-level data collected from the Société de transport de Montréal (STM)’s automatic vehicle location (AVL) and automatic passenger count (APC) systems, in Montréal, Canada. The combination of these strategies has lead to a 10.5% decline in running time along the limited stop service compared to the regular service. The regular route running time has increased by 1% on average compared to the initial time period. The study also shows that riders are generally satisfied with the service improvements. They tend to overestimate the savings associated with the implementation of this combination of strategies by 3.5-6.0 min and by 2.5-4.1 min for both the regular route and the limited stop service, respectively. This study helps transit planners and policy makers to better understand the effects of implementing a combination of strategies to improve running time and passenger’s perception of these changes in service.