Linear seakeeping and added resistance analysis by means of body-fixed coordinate system

This paper presents an alternative formulation of the boundary value problem for linear seakeeping and added resistance analysis based on a body-fixed coordinate system. The formulation does not involve higher-order derivatives of the steady velocity potential on the right-hand side of the body-boundary condition, i.e., the so-called m _j -terms in the traditional formulation when an inertial coordinate system is applied. Numerical studies are made for a modified Wigley I hull, a Series 60 ship with block coefficient 0.7, and the S175 container ship for moderate forward speeds where it is thought appropriate to use the double-body flow as basis flow. The presented results for the forced heave and pitch oscillations, motion responses, and added resistance in head-sea waves show good agreement with experiments and some other numerical studies. A Neumann–Kelvin formulation is shown to give less satisfactory results, in particular for coupled heave and pitch added mass and damping coefficients.     

Influence of hydrography on phytoplankton distribution in the Amundsen and Ross Seas, Antarctica

The phytoplankton of the Ross Sea have been intensively studied, in contrast to that of the Amundsen Sea. This study focused on understanding the environmental variables that influence the spatial patterns of assemblages during late summer, 2007, and late spring-early summer, 2008 in the Amundsen and Ross Seas. Blooms of the prymnesiophyte Phaeocystis antarctica, and the silicoflagellate Dictyocha speculum occurred in the southwestern to eastern parts of the Ross Sea, respectively, whereas diatoms dominated in southeastern Ross and the Amundsen Sea. Shallow mixed layers supported the growth of diatoms, but were not the only factor required for diatom bloom development. Modified Circumpolar Deep Water intruded into the subsurface waters (< 200 m) in the southwestern Ross Sea during February 2007, and possibly favored the formation of P. antarctica blooms. Photosynthetic quantum yield data suggest that blooms from the southwestern Ross Sea were approaching stress during January 2008, likely due to iron limitation, in contrast to blooms close to the ice edge in the Amundsen Sea, where iron may be more available to the phytoplankton. A detailed comparison between the Amundsen and Ross Seas may allow a greater understanding of the environmental-induced impacts on phytoplankton distribution and regional biogeochemical cycles.     

Performance of radial-type metal foam diesel particulate filters

An analytical study of the performance of a radial-type, metal foam diesel particulate filter is reported. A mathematical model for the filtration and regeneration of soot in a metal foam filter was developed. Nickel foam was selected for the filter medium due to its large specific area, high porosity, and high thermal resistance. For various metal foams, the filtration efficiency and the pressure drop through the filter were calculated, as was the deposition of soot. The results from the analytical model were compared with experimental data. In comparison with a conventional wall flow filter, the metal foam diesel particulate filter (DPF) is effective in utilizing the volume of material, due to the porous structures. As the size of the metal foam pores in the DPF increases from 580 μm to 800 μm, the filtration efficiency decreases from 90% to 50%, and the pressure drop decreases from 380 mbar to 20 mbar. The metal foam DPF with a large pore size is effective in utilizing the volume of material with a small pressure drop. The regeneration is completed within four minutes by the flow of hot exhaust gases under full load conditions.     

Effects of residual stresses on the static and fatigue strength of laser-welded lap joints with different welding speeds

This study was conducted to determine whether the different residual stresses caused by different welding speeds affect the static and fatigue strength of laser-welded lap joints. Residual stresses in STS301L laser-welded lap joints of different thicknesses under two laser-welding speed conditions, 4.1 m/min and 5.1 m/min, were evaluated with the incremental hole-drilling strain gage method at the middle of the heat-affected zone (HAZ). Then, static and fatigue tests were performed. The results show that higher static and fatigue strengths were obtained from the specimens welded with a 4.1 m/min welding speed than from the specimens welded at 5.1 m/min. The main difference was due to the compressive principal residual stress magnitude and its orientation near the HAZ. Also, the micro-hardness profile along the failure interface was measured to verify the static and fatigue failure behavior.     

Torsional stiffness and weight optimization of a real bus structure

In this paper, the structural optimization of a real bus structure is proposed. The proposed optimization has been accomplished by means of genetic algorithms. The structural behavior of the bus structure when subjected to weight and torsion was also analyzed using the finite element method (FEM). The results demonstrate that improved weight and torsional stiffness are achieved with the optimized structure.     

Analyzing transit service reliability using detailed data from automatic vehicular locator systems

The widespread adoption of automated vehicle location (AVL) systems and automatic passenger counters (APCs) in the transit industry has opened new venues in operations and system monitoring. In 2005, Metro Transit, Minnesota, implemented AVL system and partially implemented APC technologies. To date there has been little effort to employ the collected data in evaluating transit performance. This research uses such data to assess performance issues along a cross‐town route in the Metro Transit system. We generate a series of visual and analytical analyses to predict run time, schedule adherence and reliability of the transit route at two scales: the time point segment and the route level to demonstrate ways of identifying causes of decline in reliability levels. The analytical models show that while headways are maintained, schedule revisions are needed to improve run time and schedule adherence. Finally, the analysis suggests that many scheduled stops along this route are underutilized and recommends stop consolidation as a tool to decrease variability of service through concentrating passenger demand along a fewer number of stops. Copyright © 2010 John Wiley & Sons, Ltd.     

The economics of parking provision for the morning commute

In this paper, we study the economics of parking provision for the morning commute, where all the parking lots are owned and operated by private operators. The parking capacity allocations, parking fees and access times are considered in a parking market. First we solve the parking market equilibrium without regulatory intervention, revealing four types of competitive equilibrium. Only one of the four types of equilibrium, however, is found to be stable and realistic, and under it each parking area is preferred by the commuters during certain time periods. Compared to the case without parking choice, provision of parking through a competitive market is able to reduce commuters’ travel cost and queuing delay, but it does not necessarily lead to the most desirable market outcome that minimizes social cost or commuter cost. This issue can be addressed through market regulations, such as price-ceiling, capacity-floor or capacity-ceiling, and a quantity tax/subsidy regulation. It is found that both price-ceiling and quantity tax/subsidy regulations can efficiently reduce both the system cost and commuter cost under certain conditions, and help ensure the stability of the parking market. Numerical examples are also provided to illustrate these findings and furthermore, how a price ceiling or a quantity tax/subsidy should be set in a parking market under realistic model parameters.     

An Adaptive Neuro-Fuzzy Inference System for estimating the number of vehicles for queue management at signalized intersections

Queue management is a valuable but underutilized technique which could be used to minimize the negative impacts of queues during oversaturated traffic conditions. One of the main obstacles of applying queue management techniques along signalized arterials is the unavailability of a robust and sufficiently accurate method for measuring the number of vehicles approaching a signalized intersection. The method based on counting vehicles as they enter and exit a specific detection zone with check-in and check-out detectors is unreliable because of the likely systematic under or over counting and the resulting cumulative errors. This paper describes the application of the Adaptive Neuro-Fuzzy Inference System (ANFIS) in the development of a new fuzzy logic-based approach for estimating the Number of Vehicles in a Detection Zone (NVDZ) by using detector time-occupancy data (instead of detector counts). Microscopic simulation results are used to evaluate the accuracy of the NVDZ estimates. Tests were carried out to determine the transferability of a tuned Fuzzy Inference System (FIS) and to check the sensitivity of the calibrated FIS to detection coverage, the location of the detection zone relative to the signalized (bottleneck) intersection, the length of the detection zone, and different signal timings at the bottleneck intersection. Results show that the NVDZ estimation based on fuzzy logic seems to be a feasible approach. Although the primary objective of developing the NVDZ estimation technique has been queue management, other applications such as ramp metering and incident detection could potentially use the same technique.     

Impact of information technology on the methods and working systems of the freight forwarding industry

Freight forwarding fulfils the role of information processor. The past decade has seen considerable change in the information industry. Combine these two facts and we can begin to explain why freight forwarders have a vested interest in using computer based information systems to their full. Many organizations have tried, some with considerable success, but in others a lack of real commitment and professionalism has cost considerable sums. In this paper the background to the industry is reviewed together with an analysis of the reasons for the poor implementation of successful systems.