Field tests for evaluating cooperative intersection signal violation warning system (CISVWS)

This paper demonstrates the results of field tests for assessing a cooperative intersection signal violation warning system (CISVWS), which consists of (a) hardware, including an in-vehicle warning device, roadside antenna, and traffic signal controller, and (b) software to operate and test the cooperative system through vehicle to infrastructure (V2I) communication systems. Field tests were performed under real traffic situations in order to test the system in terms of the initiation time of the signal violation warning from the signal controller, the activation and duration of on board equipment (OBE), and the warning delay based on the relationships between distance variables, including the safe stopping distance, and the location of road side equipment (RSE). Findings from the field test at the real-world signalized intersection sites indicated that the system would be capable of reducing red light violations and intersection collisions through use of the in-vehicle warning device at signalized intersections.     

轨道运输噪音改善研析与对策——以台北捷运地下隧道为例

台湾因人口集中都会区且道路年增率远不及车辆年增率,形成都会区内及城际道路交通日益频繁与拥塞,台湾目前陆运交通主流与世界趋势相同,主要以轨道运输系统为陆运交通主要解决方案,同时近年来在降低环境污染及增加能源使用效能之呼声下,更使得铁路运输亦再度成为最佳解决方案.近年来台北捷运系统中和线古亭站穿越民房下方潜盾隧道段、维修线中华路区段及板桥线西门站至龙山寺站地下隧道,沿线接获越来越多居住其上的居民对振动噪音污染生活质量之抱怨与不满,同时因民众环保意识的日渐抬头,民众对捷运行驶的噪音愈来愈不能忍受,噪音陈情的地点也愈来愈多,目前虽采取许多改善措施,但似乎不能满足沿线居民的需求.此篇论文即针对轨道运输系统中台北捷运地下隧道分轨道噪音之成因进行分析,并经分析评估,拟定出各轨道噪音案在地下隧道的防治对策,并对部分防治对策做-长期监测,并对部分监测数据进行初步分析比对,厘清对策与成因在理论上及实务上之成效比对,从而进行设计上之回馈,以提供轨道运输在环境噪音防治之最佳方案.     

Experimental study on macroscopic spray characteristics after impingement in a slit-type GDI injector

In this paper, an experimental study on the wall-impinging spray of the slit-type GDI injector is presented. To examine the effects of various factors on the development of a spray impinging on the wall, experiments were conducted at various injection pressures, ambient pressures, wall distances from the injector tip, wall temperatures, and wall inclination angles. Behavior of the impinging spray was visualized using a planar laser scattering method. It is shown that the spray path penetration of the wall-impinging spray increases with increases in injection pressure, wall distance, wall temperature, or wall angle. On the other hand, the spray path penetration of the wall-impinging spray decreases with increases in ambient pressure. The predicted spray path penetration calculated by the empirical equation estimates the spray path penetration in all cases, and the empirical equation is optimized for the total injection pressure.     

Investigation on the flow and heat transfer characteristics of diesel engine EGR coolers

An important goal in diesel engine research is the development of a means to reduce the emissions of nitrogen oxides (NOx). The use of a cooled exhaust gas recirculation (EGR) system is one of the most effective techniques currently available for reducing nitrogen oxides. Since PM (Particulate Matter) fouling reduces the efficiency of an EGR cooler, a tradeoff exists between the amount of NOx and PM emissions, especially at high engine loads. In the present study, we performed engine dynamometer experiments and numerical analyses to investigate how the internal shape of an EGR cooler affects the heat exchanger efficiency. Heat exchanger efficiencies were examined for plain and spiral EGR coolers. The temperature and pressure distributions inside these EGR coolers were obtained in three dimensions using the numerical package program FLUENT.     

Experimental investigation and comparison of nanoparticle emission characteristics in light-duty vehicles for two different fuels

In recent years, particle number emissions rather than particulate mass emissions in automotive engines have become the subject with controversial discussions. Recent results from studies of health effects imply that it is possible that particulate mass does not properly correlate with the variety of health effects attributed to engine exhaust. The concern is now focusing on nano-sized particles emitted from I. C. engines. In this study, particulate mass and particle number concentration emitted from light-duty vehicles were investigated for a better understanding of the characteristics of the engine PM from different types of fuels, such as gasoline and diesel fuel. Engine nano-particle mass and size distributions of four test vehicles were measured by a condensation particle counter system, which is recommended by the particle measurement program in Europe (PMP), at the end of a dilution tunnel along a NEDC test mode on a chassis dynamometer. We found that particle number concentrations of diesel passenger vehicles with DPF system are lower than gasoline passenger vehicles, but PM mass has some similar values. However, in diesel vehicles with DPF system, PM mass and particle number concentrations were greatly influenced by PM regeneration. Particle emissions in light-duty vehicles emitted about 90% at the ECE15 cycle in NEDC test mode, regardless of vehicle fuel type. Particle emissions at the early cold condition of engine were highly emitted in the test mode.     

Prediction of interior noise by excitation force of the powertrain based on hybrid transfer path analysis

In the early design stage of a vehicle, simulation of interior noise is useful for assessment and enhancement of the noise, vibration and harshness (NVH) performance. Traditional transfer path analysis (TPA) technology cannot simulate interior noise since it uses an experimental method. In order to solve this problem, hybrid TPA is employed in this paper. Hybrid TPA uses simulated excitation force as the input force, which excites the flexible body of a car at the mount points, while traditional TPA uses the measured force. This simulated force is obtained by numerical analysis of the finite element (FE) model of a powertrain. Interior noise is predicted by multiplying the simulated force by the vibro-acoustic transfer function (VATF) of the vehicle. The VATF is the acoustic response in the compartment of a car to the input force at the mount point of the powertrain in the flexible car body. The trend of the predicted interior noise based on the hybrid TPA corresponds very well to the measured interior noise, with some difference due to not only experimental error and simulation error, but also the effect of the airborne path.     

Effects of Wind-Wave Misalignment on a Wind Turbine Blade Mating Process:Impact Velocities,Blade Root Damages and Structural Safety Assessment

Most wind turbine blades are assembled piece-by-piece onto the hub of a monopile-type offshore wind turbine using jack-up crane vessels. Despite the stable foun...     

Simulation of Dynamical Behaviour of a Front Wheel Suspension

A MacPherson front wheel suspension and its components are modelled with the finite element method. Nonlinearities due to both the geometry and the characteristics of the components (springs, dampers and bushings) are considered. The force due to a given compression/elongation of the spring strut is calculated and compared with experimental results. Kinematical results, change in track width and camber angle, are also shown and compared with experimental results. Good agreement between numerical and experimental results is obtained.     

A Comparison of Adaptive LQG and Nonlinear Controllers for Vehicle Suspension Systems

A design feature of many computer-controlled suspension systems, is their ability to adapt control law parameters to suit prevailing road conditions. Here, for systems employing high bandwidth actuators and state variable feedback control, the benefits of such adaptation are shown to be at best marginal. An optimal adaptive LQG system is compared with a fixed structure nonlinear feedback controller in the context of a simple quarter-vehicle suspension model. Performance comparisons are made, and trends considered under more realistic conditions. In consequence the overall usefulness of this type of adaptation is called into question.     

Finite Disturbance Directional Stability of Vehicles with Human Pilot Considering Nonlinear Cornering Behavior

The driver of a vehicle has a significant influence on handling and stability of the vehicle. Due to the complex behavior of a human pilot, a driver model is usually neglected when dealing with the problem of vehicle stability. This work focuses on the interaction between the vehicle and the human pilot. A model characterizing human operator behavior in a regulation task is employed to study directional stability. Linear stability is analyzed by the application of the Routh-Hurwitz criterion and stability boundaries separating the stable domain of operation of the driver from the unstable one are constructed.

The linear analysis predicts that the only possible instability in a driver/vehicle system is an oscillatory instability with increasing amplitude. It is shown that the addition of kinematic as well as slip angle nonlinearities in the vehicle model can have a stabilizing effect on these oscillations of the combined driver/vehicle system. They may also be responsible for the opposite, namely a linearly stable motion may become unstable to finite size disturbances. These nonlinear motions are predicted by a bifurcation analysis and are verified by direct numerical simulation.