Extending stated choice analysis to recognise agent-specific attribute endogeneity in bilateral group negotiation and choice: a think piece

This paper is a think piece on variations in the structure of stated preference studies when modelling the joint preferences of interacting agents who have the power to influence the attribute levels on offer. The approach proposed is an extension of standard stated choice methods, known as ‘stated endogenous attribute level’ (SEAL) analysis. It allows for interactive agents to adjust attribute levels off a base stated choice specification that are within their control, in an effort to reach agreement in an experimental setting. This accomplishes three goals: (1) the ability to place respondents in an environment that more closely matches interactive settings in which some attribute levels are endogenous to a specific agent, should the modeller wish to capture such behaviour; (2) the improved ability of the modeller to capture the behaviour in such settings, including a greater wealth of information on the related interaction processes, rather than simply outcomes; and (3) the expansion of the set of situations that the modeller can investigate using experimental data.

两种直接波浪能转换系统性能的比较:阿基米德波浪摆和波能浮筒(英文)

Many wave energy conversion devices have not been well received. The main reasons are that they are too complicated and not economical. However, in the last two decades direct conversion systems have drawn the attention of researchers to their widely distributed energy source due to their simple structure and low cost. The most well-known direct conversion systems presently in use include the Archimedes Wave Swing (AWS) and Power Buoy (PB). In this paper, these two systems were simulated in the same conditions and their behaviors were studied in different wave conditions. In order to verify the simulations, results of the generator of the finite element computations were followed. An attempt was made to determine the merits and drawbacks of each method under different wave conditions by comparing the performance of the two systems. The wave conditions suitable for each system were specified.     

Strategic alliances in container liner shipping

The economic crisis in the years between 2008 and 2010 has demonstrated the necessity for substantial adjustments on behalf of container lines. Capacities were shifted quickly to emerging and less affected markets allowing a faster recovery of globally organized companies. This paper illustrates the dynamics in the container shipping market. Alongside the main characteristics of the Top 20 ocean shipping companies, liner services are described. These services are classified by geographic coverage and vessel deployment. In addition, this paper provides a better understanding of the collaboration among service providers. Starting from a general framework of co-operative liner services, in-depth analyses of the global alliances in liner shipping are obtained. These formations - Grand Alliance, New World Alliance and CKYH Alliance - are compared with alternative forms of collaboration in the liner shipping industry. The analysis of alliance announcements which are related to operational and strategic changes indicates that the “global alliances” cannot be regarded as closed corporate-like entities. In effect, service agreements are not only negotiated with the focal members of the specific alliance. Instead, every service is arranged individually and under specific conditions. By understanding the dynamics within alliances, we are able to develop an assessment relating to the stability of collaborations. Ultimately, these insights direct us to several paths for future research.     

Influence of compliance for an elastokinematic model of a proposed rear suspension

The research is carried out to improve passenger’s comfort to increase the vehicles stability in dynamic conditions. The literature available in the automotive engineering considers different topics for studying suspensions. An example represents mechanisms structure and analysis (synthesis, kinematics, and dynamics) under various operating conditions. These aspects have been approached before analytically, numerical. The current paper studies the influence of the lateral force on the contact patch of the wheel and the corresponding variations of vehicle stability parameters, such as camber angle and wheel rear track. The study is performed for a newer innovative rear suspensions mechanism which does not have a wheel track and camber angle variation, relative to the chassis, when the suspension components was considered rigid. A numerical solution is obtained through a virtual model on several commercial codes: MSC Adams, Patran, Nastran. Concerning the analysed parametes, their variation increases as the applied force is increased. Moreover, the largest variation corresponds to the case were elastic bushings and deformable links are considered.     

NETWORK MANAGEMENT WITH SECURED MOBILE AGENT

IntroductionMobile Agents equipped with intelligence,of-fer new technology that helps automate NetworkManagement activities,which are increasingly be-coming complex due to exponential growth of in-ternet users,and thus demanding higher levels ofhuman manager expertise and involvement.Well-known network management protocols that areused to monitor and manage network devices in-clude Simple Network Management Protocol ( SN-MP) and Common Management Information Proto-col ( CMIP) ,SNMP be…     

IP ADDRESS AUTOCONFIGURATION FOR WIRELESS AD HOC NETWORKS

IntroductionWireless ad hoc networks are gaining increas-ing popularity in recent years because of their easeof deployment. No wired base station or infras-tructure is supported,and each hostcommunicatesone anothervia packetradios. In ad hoc networks,routing protocols are challenged with establishingand maintaining multihop routes in the face of mo-bility,bandwidth limitation and power con-straints. In ad hoc networks,each node( host)acts as a router since routes are mostly multihop.Nodes in …     

肋拱桥关键截面箱型转换加固技术试验研究

以重庆丰都庙包大桥为原型,制作了2片钢筋混凝土肋拱模型,首先采用"肋拱桥关键截面箱型转换加固技术"对其中1片进行加固处治,然后对加固前、后肋拱模型实施全过程破坏试验。通过对比分析加固前、后肋拱模型的应变、挠度、横向分布比率、裂缝及破坏模式等指标,得到以下结论:肋拱桥关键截面箱型转换加固后,新增设的钢筋混凝土箱型封闭层能与原肋拱协调变形、共同承担活载。     

Calculation of Transient Stress Field During Laser Transformation Hardening Process

IntroductionHighpowerCOzlaserssdsetransformationhardeningtechniquehasbeensuccessfullyusedinindusnyforWYears.BecausethetemPeratUrefleldislocalizedinmaterialdurllglasertransfonnationhMngProcess,highthermstrCsswillgenerateinmatgrialduringlasertfansformationhardeningProcess.Therisalsohighresidualstressinmaterial,bothintCnsionandcomPression['-'].ComPressresidualstressishelptoincreasethefatigueldrimeofthelasertreatedmaterial,butthetensilestresswillshortenthefatiguelifetmeofthelasertreatedmator…     

Performance of air conditioners with a gas-liquid separation condenser and one-tank laminated evaporator

In this study, a parallel flow condenser and laminated evaporator for an automotive air-conditioning system were modified to improve performance. Gas-liquid separation type condensers, in which the condenser and receiver drier are integrated, and one-tank laminated type evaporators were developed, and their performances were investigated experimentally using HFC-134a. Heat transfer characteristics in the condenser are examined by means of air temperature, air velocity entering the condenser and inlet pressure of the refrigerant; heat transfer characteristics in the evaporator are examined by means of air temperature, relative humidity, flow rate of air, outlet pressure of refrigerant and superheat. Pressure drops for both evaporator and condenser are also measured, and correlations for pressure drop are derived for the condenser and evaporator, respectively. Air velocity and mass flow rate of the refrigerant have a significant effect on the overall heat transfer coefficient, and flow pass is not significantly influenced by the cooling capacity of the condenser. The overall heat transfer coefficient of the evaporator increases as air flow rate, air temperature and relative humidity increases.     

Experimental studies on low pressure semi-direct fuel injection in a two stroke spark ignition engine

In this work a two-stroke scooter engine was modified to work with semi-direct injection of gasoline at a pressure of 8 bar from an injector in the cylinder barrel pointed toward the cylinder head. The influence of injection timing, injection pressure, spark plug location and air-fuel ratio, on performance, emissions and combustion characteristics has been investigated. In addition, a comparison has been made with manifold injection of gasoline on the same engine at a given speed and various outputs. A significant reduction in HC emissions and fuel consumption with no adverse effects on NOx emissions and combustion stability was observed. A small drop in power and increase in CO emission were observed disadvantages of the new injection system. Injection timing was found to be the most important factor and a balance between reduction in shortcircuited fuel by late injection, and time for mixture preparation by advancing the injection, was found to be essential.