Challenges and opportunities for transportation: Implementation of the clean air act amendments of 1990 and the intermodal surface transportation efficiency act of 1991

The Federal Clean Air Act Amendments of 1990 (CAAA) may be the most powerful of all environmental laws affecting transportation. They are intended to significantly affect transportation decision-making, not only to achieve air quality goals but also to affect broader environmental goals related to land use, travel mode choice, and reductions in vehicle miles traveled. The CAAA require greater integration of transportation and air quality planning, and assign a greater responsibility to transportation plans and programs for reducing mobile source emissions. By expanding the requirements for determining the conformity of transportation plans, programs, and projects with State Implementation Plans for air quality, and by expanding the use of highway funding sanctions to enforce those requirements, the CAAA ensure a continuing linkage between transportation and environmental goals.While the CAAA give transportation and air quality decision-makers the mandate to better coordinate their respective planning processes, the Intermodal Surface Transportation Efficiency Act of 1991 offers the tools to help carry out that mandate. Consequently, this paper summarizes the transportation and air quality provisions of both of these Acts and their relationships.     

Scale and rationalization in container shipping

Return to scale are important in container shipping: service operators are continuing to increase the size of their vessels. Mr Seok-Min Lim's article 'Economies of container ship size' (Maritime pollicy and Management,21(2) pages 149-160, 1994) uses a sample of transPacific voyages to evaluate the effect of vessel scale on revenue and cost.Although the results are inconclusive,his study is of value in drawing attention to the revenue-side problems of large containerships. More data need to be collected before the effects of topping up with low-rated cargo on unit revenue retention can be assessed. Meanwhile the pursuit of scale aggravates over-tonnaging. The required response is further rationalization, through the medium of the conferences and the container consortia. In Europe both are under political attack. Operators need to convince the authorities of the soundness of the soundness of their case for adapting these institutions to the neeeds of times.Otherwise the scramble for scale could spell disaster.     

FLUXMANCHE radiotracers measurements: A contribution to the dynamics of the English Channel and North Sea

From 1986 to 1992, ¹²⁵Sb released by the nuclear fuel reprocessing plant at La Hague has been used to study the transfer of waters from mid-Channel areas towards the Straits of Dover. Since 1940, these investigations have formed part of the MAST 53 FLUXMANCHE programme and have involved repeated measurements on a Straits of Dover transect. A discussion of the results is presented here which takes into account new information provided by a hydrodynamic model developed in the framework of FLUXMANCHE; it combines knowledge of the monthly fluxes of water trough the Straits of Dover and week-by-week simulation of the ¹²⁵Sb activities of waters flowing in this aera. It is proposed that soluble radionuclides introduced into the central Channel are transferred towards the Straits of Dover over a time which varies from four to seven months depending on the route taken.     

Flange Force Effects on the Motion of a Train Wheelset

The motion of a train wheelset is investigated using Hopf bifurcation theory. The method takes full account of the nonlinear effects of the flange-rail contact forces which are incorporated in the model; The numerical solution is obtained over a wide range of forward speeds by transforming the bifurcation problem into a regular nonlinear boundary value problem, which is solved by standard methods. This solution is shown to be orbitally, asymptotically stable. The algorithm supplies complete information on the lateral and yaw motions and on the period of oscillation, even for very high forward speeds.     

Multivariate assimilation in MERCATOR project: New statistical parameters from forecast error estimation

The new operational prototype of Mercator (french Global Ocean Data Assimilation Experiment contribution) is composed of a North Atlantic primitive equation ocean model OPA (Ocean Parallel Algorithm between 20°S and 70°N, [Madec, G., P. Delecluse, M. Imbard and C. Lévy (1998). OPA8.1 ocean general circulation model reference manuel. Notes du pôle de modélisation IPSL. n°11: 91p]) and of a multivariate and multidata assimilation scheme [De Mey, P. and M. Benkiran (2002). “A multivariate reduced-order optimal interpolation method and its application in Mediterranean basin-scale circulation.” Ocean Forecasting : Conceptual basis and application, Pinardi, N., Springer Verlag.] This system has already given some significant improvements from previous Mercator configurations (M. Benkiran, personal communication). However some biases on ocean state still remain in the tropics where the reduced-order optimal interpolation scheme is suspected to be ill-parameted in the model forecast error. Indeed the guess error covariance matrix is decomposed into an error variance value and a spatio-temporal correlation function which are assumed to have some “good” properties (spatial homogeneity of the correlation function, constant ratio between signal and error variance). This study shows how we can use ensemble methods to validate these assumptions. We can see that the correlation function can reach negative values locally, mostly in regions of high variability contradictory with the homogeneous hypothesis. The reduced space used in the operational configuration is based on the signal seasonal Empirical Orthogonal Functions (EOFs). An empirical relationship between signal and error variance has been set and the correlation function is the same on every dimension of the reduced space. By projection of the estimated guess error variance onto the reduced space, we find a repartition of this quantity quite different to what was set in the system. The error statistics is found to be inhomogeneous compared to hypothesis made in the assimilation scheme. These two new parameters tested separately in the assimilation scheme gives significant improvements of the forecast and analysis results. This is particularly obvious in the tropics. But relationship between signal and error statistics (as assumed in the optimal interpolation) is found to be complex.     

A generalized model of pelagic biogeochemistry for the global ocean ecosystem. Part I: Theory

The set of equations for global ocean biogeochemistry deterministic models have been formulated in a comprehensive and unified form in order to use them in numerical simulations of the marine ecosystem for climate change studies (PELAGOS, PELAgic biogeochemistry for Global Ocean Simulations). The fundamental approach stems from the representation of marine trophic interactions and major biogeochemical cycles introduced in the European Regional Seas Ecosystem Model (ERSEM). Our theoretical formulation revisits and generalizes the stoichiometric approach of ERSEM by defining the state variables as Chemical Functional Families (CFF). CFFs are further subdivided into living, non-living and inorganic components. Living CFFs are the basis for the definition of Living Functional Groups, the biomass-based functional prototype of the real organisms. Both CFFs and LFGs are theoretical constructs which allow us to relate measurable properties of marine biogeochemistry to the state variables used in deterministic models. This approach is sufficiently generic that may be used to describe other existing biomass-based ecosystem model.     

Methods of determining choice probability in utility maximising multiple alternative models

Methods of estimating choice probabilities between multiple alternatives are described, within the context of various methods of specifying the degree of correlation between the alternatives. A utility maximising framework is assumed. The models described are based either on the logit family or multinomial probit. Two new methods of analytical approximation for the multinomial probit model are introduced, which appear to show significant advantages over the traditional Clark method. Some comparative results of choice probability estimates are presented to support this contention. The conclusion discusses the relative usefulness of different choice estimation methods for different types of problem.     

An analysis of the Brazilian ship financing system

The Brazilian ship financing system has some unique features. The funds made available to finance the construction and acquisition of ships are sourced from a tax on import and cabotage freight, payable by the shippers. For Brazilian flagged ships, a portion of the tax generated can be used for the payment of loan instalments. This paper analyses the impact of the tax on the economy as a whole, and discusses the distribution of the tax burden between the shipowner and the shipper, taking into account the maritime transport demand elasticities in Brazil. The paper also analyses the effectiveness of the financing system in reducing the capital cost to shipowner, and the distortion effects produced by the utilization of the tax in loan repayments. The conclusion is that there are important distortions that may threaten the recovery of the maritime industry in Brazil.     

Recent Development in Active Steering of Railway Vehicles

Summary This paper presents the recent development on active steering for railway vehicles, and carries out a technical appraisal of different actuation schemes and control approaches. It brings together the latest research activities and findings for the full active steering techniques for rail vehicles with the solid-axle wheelsets, independently-rotating wheelsets and wheel-pairs without axles, but relevant work on passive and semi-active solutions is also briefly described. Potential benefits of the use of a combination of modern control technology and mechatronic approach are evaluated, and in particular solutions for the difficult design trade-off between the stability and the curving performance are presented. Various actuation configurations are discussed, and advantages and drawbacks of those schemes are investigated. The outline design using a number of control methods is analysed, and measurement requirement and state estimation techniques essential for implementation of the active steering schemes are also explored. In addition the issue of safety criticality is highlighted and a possible approach for developing fault-tolerant systems is proposed. Overall the paper provides an authoritative assessment of the major advances in actively-steered wheels and addresses outstanding critical issues.