Response of benthic infauna and epifauna to ocean disposal of red clay dredged material in the New York Bight: A study using sediment-profile imaging, surface imaging and traditional methods

In 1997, approximately 1 million cubic yards of consolidated red clay was dredged from Newark Bay in New Jersey and deposited on the seafloor at an open-water dredged material disposal site located on the inner continental shelf of the New York Bight. To address concerns about the ability of benthic organisms to colonize the seafloor deposits of this compact, organic-poor red clay, monitoring surveys were conducted in 1998 (1 year after disposal) and 2002 (5 years after disposal). The surveys used a combination of sediment imaging and traditional grab sampling methods to characterize physical and biological conditions over the surface of the red clay deposits in comparison to nearby reference areas consisting of either naturally-occurring, sandy surface sediments or deposits of unconsolidated, muddy dredged material. Sediment-surface and sediment-profile images (SPI) collected in summer 2002 indicated that the surface of the red clay deposits had become much smoother and more heterogeneous in texture compared to images collected in 1998. The images also indicated that these deposits had become colonized to a much greater degree by relatively abundant and diverse infaunal and epifaunal communities compared to 1998. Taxonomic analysis of benthic grab samples confirmed the imaging results and indicated relatively high infaunal organism abundance and diversity over the red clay deposits in 2002 compared to the reference areas. However, the structure of the benthic community inhabiting the red clay was fundamentally different from the communities in the reference areas, due to the differences in sediment texture and composition. The combination of imaging and traditional taxonomic approaches used in this study provided much greater insight on the red clay colonization process than either approach by itself.     

Selection of techniques for reducing shipping NOx and SOx emissions

This paper develops a subjective generic methodology for providing ship owners with a transparent evaluation tool for selecting their preferred NOx and SOx control techniques. We quantitatively analyse the merits of the control methods available in marine air pollution control practice using data collected from shipping companies, shipyards and maritime academies. We also prioritize the applicable control techniques with respect to operational shipping environments.     

Home-work carpooling for social mixing

Transportation - Shared mobility is widely recognized for its contribution in reducing carbon footprint, traffic congestion, parking needs and transportation-related costs in urban and suburban...     

Solution for failure analysis of automotive axle knuckle pull-out

A completely safe engineering solution to the automotive assembly line knuckle ball-joint pull-out problem is achieved using failure analysis based on the “Design of Experiment” (DOE) method. During use, some ball-joints move in their housings or come loose under heavy loads. The purpose of this study is to determine critical production parameters that will eliminate this failure. In this research, the knuckle-ball-joint pull-out problem is examined, and knuckle housing and ball-joint outer diameter limits are re-defined. Four levels of interference between knuckle and ball-joint diameters and 2 levels of knuckle thickness are specified. Experiments are repeated five times using General Variance Analysis. Required pull-out force is determined, and necessary interference is found. New knuckle housing and ball-joint diameters, based on recommended interference values, are determined. It is also found that thickness of knuckle boss does not affect the results. Therefore, the design is unchanged in this region and this reduces costs.     

Synoptic transects on the distribution of trace elements (Hg,Pb, Cd,Cu, Ni,Zn, Co,Mn, Fe,and Al) in surface waters of the Northern- and Southern East Atlantic

Surface seawater samples were taken in the framework of the GEOTRACES program on “POLARSTERN” expedition ANT XXIII/1 in the Eastern Atlantic in 2005 to study the distribution of the trace elements Hg (mercury), Pb (lead), Cd (cadmium), Cu (copper), Ni (nickel), Zn (zinc), Co (cobalt), Mn (manganese), Fe (iron), and Al (aluminium). With the exception of Hg, results were compared to earlier datasets from 1989 to 1990. The particulate fraction averaged over the transect was calculated to be 49% for Cd, 23% for Mn and 50% for Fe indicating a release of these TEI's (trace elements and their isotopes) from a leachable SPM fraction in the stored and acidified samples.Total Pb concentrations ranged between 5 and 20 pmol kg^? 1 in 2005 with highest values in the ITCZ (intertropical convergence zone). In 1989 Pb concentrations were twice as high in the region of the ITCZ, while by a factor of 10–15 higher values were obtained in the North Atlantic.Total Cd and Co are dominated, by different seasonal upwelling regimes (Equatorial upwelling, Guinea Dome, Angola Dome).Total Cu, Ni, Fe, Mn and Al show nearly identical concentrations in 1990 and 2005. For total manganese and aluminium strong maxima (3–4 nmol kg^? 1 and 55 nmol kg^? 1 respectively) are observed between 23°N and 0°, while the Fe maximum (6–9 nmol kg^? 1) is located at 7°N. Total Hg concentrations ranged between 0.5 and 4.5 pmol kg^? 1.     

Positive impact of distribution centres on the environment

The transport sector in general, and trucks in particular, generates a significant amount of emissions in Australia. It appears the trend will escalate unless different measures are taken to reduce the reliance of freight transport on trucks. This paper discusses the benefits of distribution centres as a means to reduce road congestion, increase safety, protect the environment by reducing atmospheric pollution and improve freight distribution. It also provides the effective use of the existing rail network and its infrastructure and improves the lead-time as well as lowering the cost of transportation of cargo. It also investigates the positive impact of distribution centres located near to manufacturing and farming production units. A simulation model has been developed and used to help determine the amount of atmospheric pollution produced by two modes of land transport, rail and road, for the movement of containers between port and destination. Results derived from the model provide evidence about a preferred land-transport regime. The paper has two sections: (1) the role of distribution centres in the chain of transport and (2) the impact of distribution centres on the environment. The first section investigates the feasibility of the implementation of distribution centres in the State of Victoria with respect to rail line capacity and location allocation. The second section presents an additional simulation model that investigates the role of a distribution centre in relation to the amount of atmospheric pollution produced by rail and road, while containers are carried between port and destination.     

Probability distributions of wave run-up on a TLP model

Wave run-up on multi-column compliant and rigid platforms both on the weather-side and beneath the platform deck is a complex wave–structure interaction problem. Predictions based upon higher order hydrodynamic design codes have been improved our understanding of this phenomena but have not appreciably reduced the reliance on model tests and statistical analyses. In this study a three parameter distribution model is developed based upon the inclusion of linear, second-order, and mean contributions to the wave run-up utilizing the method of L-moments. Explicit expressions are derived relating the L-moments and the input from experimental data. The sample L-moments are developed from a linear combination of ordered sequence of the data and consequently the high order L-moments, i.e. L-skewness and L-kurtosis, are less biased than the corresponding ordinary moments. The L-moment definitions of the variance, skewness and kurtosis are numerically compared with values obtained using the more standard definitions for these parameters. Rigid hull measurements are compared with the compliant hull configuration for a mini-TLP model. The sea-states investigated include the relatively benign sea conditions off of West Africa and the more extreme sea environments of Gulf of Mexico.     

Experimental study and 3D CFD analysis on the optimization of throttle angle for a convergent vortex tube

Seven adjustments of convergent-type Vortex Tube (VT) with different throttle angles were applied. The adjustments were made to analyze the influences of such angles on cold and hot temperature drops as well as flow structures inside the VTs. An experimental setup was designed, and tests were performed on different convergent VT configurations at injection pressures ranging from 0.45 to 0.65 MPa. The angles of the throttle valve were arranged between 30° to 90°, and the numbers of injection nozzles ranged between 2 and 6. Laboratory results indicated that the maximum hot and cold temperature drops ranged from 23.24 to 35 K and from 22.87 to 32.88 K, respectively, at four injection nozzles. Results also showed that temperature drop is a function of hot throttle valve angle with the maximum hot and cold temperature drops depending on the angle applied. We used graphs to demonstrate the changes in the cold and hot temperature drops with respect to hot throttle angle values. These values were interpreted and evaluated to determine the optimum angle, which was 60°. The CFD outputs agreed very well with the laboratory results. The proposed CFD results can help future researchers gain good insights into the complicated separation process taking place inside the VTs.     

Energy use reduction potential of passenger transport in Europe

To contribute to a sustainable society, considerable reduction in energy use and CO₂ emissions should be achieved. This paper presents the results of calculations exploring the energy use reduction potential of passenger transport for Western Europe (OECD Europe minus Turkey). For these calculations, three types of options are defined emphasizing technological, infrastructural and behavioural change. By 2050, technological improvements may reduce energy use per passenger-km by - 30%. Adding infrastructural options, an energy reduction of > 50% by 2050 can be realised. To achieve further energy reductions, options with a large behavioural impact should also be implemented. This results in an 80% energy reduction potential in the transport sector by 2050. To calculate the reduction potential on OECD Europe level, one should factor in expectations concerning mobility growth. Two mobility development scenarios are used. Both scenarios foresee a net decrease in total energy use of 20% with the introduction of the technological and infrastructural improvement options. Adding options emphasizing behavioural change results in a net reduction potential of - 60% by 2050.     

AUV hull shape design based on desired pressure distribution

The role of autonomous underwater vehicles (AUVs) is more important in the quest to reach the deep seas today than ever before. The hull shape of the AUV can differ depending on the special mission considered for the vehicle. Therefore, different types of algorithms for the body shape design of these kinds of vehicles are being developed every day. In the current work, a new procedure has been proposed for designing the body shape of an AUV. Using this method which is based on a desired pressure distribution, it is possible to obtain the desired hull shape design. Artificial neural network algorithm has been used for this purpose. Preliminary data for training and testing of the network have been obtained from CFD simulation of the flow around the body of Hydrolab500 AUV. In this regard, pressure distribution has been evaluated around each body by changing the nose and tail profile of AUV. The results obtained from this research indicate that a body correlated to the desired pressure can be designed properly.