Spatial and temporal variability of size-fractionated biomass and primary production in the Ross Sea (Antarctica) during austral spring and summer

The results of a study on the spatial and temporal dynamics of size-fractionated biomass and production of phytoplankton in the Ross Sea during the austral spring and summer are reported. The spring cruise took place in the offshore Ross Sea from 14 November to 14 December 1994. Sampling was carried out on a transect of 27 stations distributed from 76.5 to 72.0°S along 175°E, and covered the three main Antarctic environments of the polynya open waters, the marginal ice zone and the pack ice area. Three subsystems were identified. The subsystem of the polynya was characterised by the predominance of the micro- and nano-planktonic fractions, chlorophyll (Chl a) concentrations from 69.6 to 164.7 mg m⁻² and production rates from 0.68 to 1.14 g C m⁻² day⁻¹. The second subsystem, the marginal ice zone, showed a relative increase of the micro-planktonic fraction, high biomass levels (from 99.64 to 220 mg Chl m⁻²) and production rates from 0.99 to 2.7 g C m⁻² day⁻¹. The subsystem of the pack ice area had a phytoplankton community dominated by the pico-planktonic fraction and showed low biomasses (from 19.4 to 37.7 mg Chl m⁻²) and production rates (0.28 to 0.60 g C m⁻² day⁻¹). Selective grazing by krill is considered an important factor in determining the size structure of the phytoplankton communities. The summer study consisted of a time series carried out in inshore waters of Terra Nova Bay from 12 January to 8 February 1990. In a well stabilised water column and with high levels of PAR always available, the primary production rates of a community dominated by micro-plankton varied from 0.52 to 1.2 g C m⁻² day⁻¹ (average 0.84). A high P/B ratio, up to 3, and a remarkably elevated mean phaeopigment (Phaeo)/Chl a ratio of 2.4 indicated an active removal of biomass by grazing, confirmed by the presence of faecal pellets in quantities reaching 6000 m⁻³ in the upper 50 m. The peculiarities of the inshore versus offshore environments in terms of community size structure, production processes and their implications as regards the food web are discussed.     

实用感应电机饱和模型

文章提出了基于H-G图建立感应电机饱和模型的新方法,它只需用H-G图中每个饱和点对应的3个参数来描述电机的饱和.另外这种方法还可以推广到考虑其他影响因素的电机,比如温度和集肤效应时的电机建模.文章将这种模型与感应电机有、无交叉耦合的两种传统模型进行了比较.仿真结果显示,这种方法较交叉耦合饱和模型在精度和准确度上有更多优点,特别是在启动和满负载运行时.     

Diel vertical migration and feeding in adult female Calanus pacificus, Metridia lucens and Pseudocalanus newmani during a spring bloom in Dabob Bay, a fjord in Washington USA

Diel vertical migration and feeding on phytoplankton by adult female Calanus pacificus, Metridia lucens and Pseudocalanus newmani were simultaneously measured near the end of a phytoplankton bloom. Almost the entire Calanus population migrated out of the deep layer (108–50 m) at night but only about 30% came to the surface (25–0 m). Feeding occurred only at night and was equally high in the surface and intermediate layers, in spite of much higher food concentrations in the surface. Like Calanus, the entire Metridia population was found in the deep layer during the day but unlike Calanus, 20–50% remained in the deep layer at night and most migratory Metridia were collected from the surface layer. Metridia feeding at night was highest in the surface layer but significant feeding also occurred in both the intermediate and deep layers. Migratory behavior of Pseudocalanus was weak, with the proportion of the population in the surface layer increasing from slightly <10% during the day to approx 30% at night. Feeding occurred in both surface and intermediate layers throughout the 24 h but was greater in both layers at night. The different migratory patterns are discussed in the context of our current understanding of the contributions of predator avoidance and feeding to diel vertical migration.     

A “horizontal Sverdrup mechanism” may control the spring bloom around small oceanic islands and over banks

One of the most basic paradigms in marine ecology is the “Sverdrup mechanism,” where the spring bloom is retarded if the surface mixed layer is too deep, due to the algae being mixed vertically out of the euphotic layer. A similar mechanism may operate in vertically homogeneous water over a small shallow area, surrounded by deep waters, if the horizontal exchange is sufficiently intense. In systems with inter-annual variations in the horizontal exchange rate, this may induce inter-annual variations in the timing and intensity of the spring bloom. A numerical primary production model with circular symmetry and prescribed horizontal exchange rate is developed. Using the Faroe Shelf as an example, the model and observations show that the timing and intensity of the spring bloom in the shallow parts of the system may be critically dependent upon the rate of the horizontal exchange. Numerical experiments confirm that the effect of horizontal exchange on the spring bloom is less pronounced for banks than for shelf systems around islands of similar scales, and that the effect increases in importance as the horizontal scale is reduced.     

Travel mode attitudes,urban context,and demographics: do they interact differently for bicycle commuting and cycling for other purposes?

This study examined whether interactions between travel mode attitudes, urbanization level, and socio-demographics were different for bicycle commuting and cycling for other purposes. Data were obtained from the 2014 wave of the Netherlands mobility panel (MPN). In total, 2673 respondents (18?+?years) who had recorded at least one trip on the days covered by the survey were included in the sample. Four outcomes were constructed, two of which concerned commuting-related cycling: any commuting-related bicycle usage (yes vs. no) and average cycling duration (in hours per weekday). Likewise, two similar outcome variables concerning cycling for other proposes were constructed. These outcomes were analyzed by means of Tobit regression models (cycling duration) and binary logistic models (any bicycle usage). Attitudinal factors concerning different travel modes, namely bus, car, cycling, and train, were constructed by means of factor analysis. The results showed that a positive attitude toward cycling was positively related to bicycle commuting duration, but this association was less strong among those with a positive attitude toward bus use. Having a positive cycling attitude had a weaker association with both bicycle commuting usage and duration in those who do not always have a car available. Regarding cycling for other purposes, cycling attitude had a stronger positive association with cycling duration among residents of very highly urbanized area, compared to residents of less urbanized areas. The available evidence, though limited, suggests that targeting attitudes can have a measurable impact on bicycling, but not to the same extend among all people.

     

An exploratory analysis of observed and latent variables affecting intercity train service quality in developing countries

Transportation - Service quality (SQ) and customer satisfaction as perceived by 1037 passengers on intercity train services in Bangladesh were examined using structural equation modeling to explain...     

Representing heterogeneity in structural relationships among multiple choice variables using a latent segmentation approach

Transportation - Travel model systems often adopt a single decision structure that links several activity-travel choices together. The single decision structure is then used to predict...     

Practical Frequency and Time Optimal Design of Passive Linear Vibration Isolation Mounts

Summary In this paper we examine a linear one-degree of freedom vibration isolator mount. The linearity of the system allows us to analyze its frequency and time response characteristics analytically. Optimal damping and stiffness values for the isolator are obtained by minimizing certain cost functions, which are the Root Mean Square (RMS) of the absolute acceleration and the relative displacement. These RMS cost functions are used to create a design chart for the isolator parameters. This is very useful particularly in the presence of physical constraints such as a limit in relative displacement. The time response of the system for a unit step input is also considered to gain an insight into the transient characteristics of the system. We obtain an optimal value for the damping ratio of the system in order to minimize the transmitted acceleration. Combining the frequency and time response analyses leads to an optimal value for the mount natural frequency and damping ratio satisfying both time and frequency domains. The results are verified numerically using measured acceleration as input.     

Fuel consumption model for bus rapid transit

Transportation planners and policy analysts require, for scenario testing, a detailed fuel consumption model of public transit operating in multimodal corridors. Although much effort has been devoted to the development of detailed methodology for estimating fuel consumption of automobile travel on freeways and arterials, the same is not the case for public transit. This paper presents methodology for the estimation of fuel consumption for bus operation on transitways/busways serving major travel corridors. Bus fuel consumption model is reported for standard and articulated buses. This model was adapted from an existing heavy vehicle fuel use model by incorporating the transitway design and bus operational characteristics.     

Numerical Study of the Plastic Behaviour of a Low Alloy Steel during Phase Transformation

IntroductionItiswellknownthaphasetrapsformationsplayanimPortantroleontheresidualstressesandstrainsinducedbythermalprocessessuchasweldingandquenching.lnthispaPer,wefocusourattentiononthebehaviourofsteelsduringphasetransformations.AtheoreticalaPproachhasbeenachievedbyLeblondetal[1]andhasledtOamacroscopicmodelinthecaseofideal-plasticphases[2][3].Thenthemodelhasbeengeneralizedtotakestrainhardeningphenomenaintoaccount[4].ThetheoreticalaPproachhasbeenassessedandcompletedusingflniteelementsimulati…