铁路铸钢件用5t电弧炉筑炉材料的选用及工艺实践探讨

简要阐述了提高铁路铸钢件炼钢用5t电弧炉炉龄的必要性，从筑炉材料和工艺改进方面提出了提高炉龄的方法。     

组合式多用途支杠的研制

为适应天津港北煤南移工程、提升北疆作业环境质量,我公司从2006年起逐步进入了货类调整期,由钢材、集装袋等件杂货取代了煤、铁矿石等散货,而作业过程中所涉及的工属具也发生了很大的变化。散货作业主要使用抓斗,而件杂货(钢板、钢管、螺纹钢、工字钢、C型钢及集装袋)则使用装     

基于ARM和FPGA架构的地铁车辆MVB总线分析仪设计

车辆通信多功能总线(MVB)已成为城市轨道交通车辆通信的主流。将FPGA(现场可编程门阵列)的高速信号采集的优势与ARM(嵌入式微处理器)可嵌入实时操作系统的特点相结合,研制了基于嵌入式系统的便携式总线分析仪。搭建了测试系统,在MVB设备EDCU(车门电子控制单元)中进行试验验证。验证结果表明,该总线分析仪可实现与MVB设备的主帧发送和从帧回复的精确采集和解码,可用于地铁车载MVB设备的故障检测和维修等。     

客运专线隧道大断面软弱围岩施工存在的问题及对策

 随着铁路客运专线的大规模发展，将会不断遇到软弱围岩大断面隧道的施工问题，针对目前我国客运专线隧道大断面软弱围岩施工的现状，分析了施工中存在的主要技术问题，并提出了相应的对策,以期对目前在建和拟建的隧道工程提供参考和借鉴。     

A Timing Synchronization Technique for High-pressure Common Rail Diesel Engine Based on eTPU Module

根据曲轴和凸轮轴传感器信号的特点,提出了一种基于信号编码的正时同步方法,并采用分层设计思想和模块化设计方法,开发了基于MPC563芯片eTPU模块的正时同步软件,实现了正时同步控制.试验结果表明,该方法思路正确,控制准确,达到了预期的目的.     

Measuring the potential for automobile fuel savings in the US: The impact of obesity

High rates of oil consumption and obesity in the US have become important socioeconomic concerns. While these concerns may seem unrelated at first, growing obesity rates in the US increase fuel consumption by adding passenger weight to vehicles. This paper estimates the additional amount of fuel (i.e., gasoline) consumed annually by noncommercial passenger highway vehicles in the US due to passenger overweight and obesity. The mathematical model presented in this paper estimates that as many as one billion additional gallons of gasoline are consumed each year due to overweight and obesity in the US, accounting for up to 0.8% of the fuel consumed by these vehicles annually. This additional fuel consumption causes carbon dioxide emissions of up to 20 billion pounds or more, accounting for up to 0.5% of the annual carbon dioxide emissions in the transportation sector.     

Topological analysis of powertrains for refuse-collecting vehicles based on real routes–Part I: Hybrid hydraulic powertrain

In this two-part paper, a topological analysis of powertrains for refuse-collecting vehicles (RCVs) based on the simulation of different architectures (internal combustion engine, hybrid electric, and hybrid hydraulic) on real routes is proposed. In this first part, a characterization of a standard route is performed, analyzing the average power consumption and the most frequent working points of an internal combustion engine (ICE) in real routes. This information is used to define alternative powertrain architectures. A hybrid hydraulic powertrain architecture is proposed and modelled. The proposed powertrain model is executed using two different control algorithms, with and without predictive strategies, with data obtained from real routes. A calculation engine (an algorithm which runs the vehicle models on real routes), is presented and used for simulations. This calculation engine has been specifically designed to analyze if the different alternative powertrain delivers the same performance of the original ICE. Finally, the overall performance of the different architectures and control strategies are summarized into a fuel and energy consumption table, which will be used in the second part of this paper to compare with the different architectures based on hybrid electric powertrain. The overall performance of the different architectures indicates that the use of a hybrid hydraulic powertrain with simple control laws can reduce the fuel consumption up to a 14 %.     

武汉杨泗港长江大桥工程交通疏解设计

在过江通道资源紧张而交通量又过快增长的沿江大城市,采用双层公路桥梁建设方式可以有效缓解交通问题,但双层公路大桥势必会带来更复杂的交通组织,更高要求的交通疏解设计。该文以武汉杨泗港长江大桥工程为例,通过采取合理布局两岸疏解立交匝道、完善配套道路、重视人行和非机动车慢行系统、因地制宜等对策措施,较好地满足了大桥交通疏解要求。     

如何推进企业政工工作与企业管理的共同发展

伴随着我国经济的不断发展与进步,我国企业也正在不断的发展,但是现如今的情况是我国企业内部依旧存在很多的难以解决的问题,这导致我国企业的发展遭受到了限制,其中政工工作就是较为关键的一项问题。政工工作的含义在我国企业运行过程中已经得到了重视,可以使用更多的方式来提升企业管理水平,这对于企业的发展有着重要的意义。本文主要针对于企业政工工作的实际内涵和企业管理的发展方向展开讨论,分析我国企业政工工作的基本方式。