Experimental investigation using CFD for thermal performance of ventilated disc brake rotor

In the present work, different ventilated disc brake rotor configurations were analysed to enhance the heat transfer rate and obtain the uniform temperature distribution in the rotor. CFD code used in this work was validated at using experimental results obtained by conducting experiments on a test rig. The experimental analysis was performed to calculate the mass flow rate and heat dissipation through the rotor. Further, different types of rotor configurations viz. straight radial vane (SRV), tapered radial vane (TRV), alternate long and short vane (ALSV), variable diameter circular pillars (VDCP) were considered for the analysis. A rotor segment of 20° was considered for the numerical analysis due to its rotational symmetry. CFD results were in good agreement with the experiments. The maximum deviation of the numerical results were about 12 % from the experimental results. It is found from the analysis that among the different types of rotor configurations; variable diameter circular pillars (VDCP) rotor gives better rate of heat dissipation with more uniform temperature distribution in the flow passages. Hence for modern high speed vehicles VDCP rotor may be more appropriate.     

Prospects for plug-in hybrid electric vehicles in the United States and Japan: A general equilibrium analysis

The plug-in hybrid electric vehicle (PHEV) may offer a potential near term, low-carbon alternative to today’s gasoline- and diesel-powered vehicles. A representative vehicle technology that runs on electricity in addition to conventional fuels was introduced into the MIT Emissions Prediction and Policy Analysis (EPPA) model as a perfect substitute for internal combustion engine (ICE-only) vehicles in two likely early-adopting markets, the United States and Japan. We investigate the effect of relative vehicle cost and all-electric range on the timing of PHEV market entry in the presence and absence of an advanced cellulosic biofuels technology and a strong (450 ppm) economy-wide carbon constraint. Vehicle cost could be a significant barrier to PHEV entry unless fairly aggressive goals for reducing battery costs are met. If a low-cost PHEV is available we find that its adoption has the potential to reduce CO₂ emissions, refined oil demand, and under a carbon policy the required CO₂ price in both the United States and Japan. The emissions reduction potential of PHEV adoption depends on the carbon intensity of electric power generation. Thus, the technology is much more effective in reducing CO₂ emissions if adoption occurs under an economy-wide cap and trade system that also encourages low-carbon electricity generation.     

Access control policies without inside queues: Their properties and public policy implications

An access control policy that eliminates all queues beyond the entry points to a network has obvious benefits, which include smooth travel and predictable travel times inside the network. Yet it has never been proven, to the best of our knowledge, whether excluding inside queues yields sub-optimal network performance or, in other words, allowing inside queues can actually further reduce the system travel cost. Moreover, it is not clear whether an optimal control policy derived from efficiency considerations can also be a fair policy to all road users. This paper provide answers to these questions in the context of a monocentric network. By analyzing the structure of the access control problem considering all feasible policies (with/without inside queues), we show that the minimal system cost realizable by access control can be obtained without directly solving a non-convex optimization program, and can indeed always be achieved by a control policy excluding all of the inside queues. These optimal policies are defined by a polyhedral set and a Finite Generation Algorithm can be applied to derive the analytical form of this set. The optimal policies are not unique in general, thus making it possible to achieve both minimal system cost and fairness simultaneously.     

Tests on ultimate strength of hull box girders made of high tensile steel

The experimental results of the collapse of three box girders subjected to pure bending moment are presented. The structures are made of high tensile steel of 690 MPa of nominal yield stress reinforced with bar stiffeners of the same material. The moment curvature curves are presented covering the pre- and post-collapse regions. The modes of collapse for each box girder are discussed considering the variation on the panel's slenderness. The concept of efficiency of high tensile steel structures is introduced. The concept is very useful to identify the governing parameters affecting the ultimate strength of 3D structures under predominant bending moment.     

Cost-time Minimization in a Transportation Problem with Fuzzy Parameters: A Case Study

In real world applications the supply, the demand and the transportation cost per unit of the quantities in a transportation problem are hardly specified precisely because of the changing economic and environmental conditions. It is also important that the time required for transportation should be minimum. In this paper a method has been proposed for the minimization of transportation cost as well as time of transportation when the demand, supply and transportation cost per unit of the quantities are fuzzy. The problem is modeled as multi objective linear programming problem with imprecise parameters. Fuzzy parametric programming has been used to handle impreciseness and the resulting multi objective problem has been solved by prioritized goal programming approach. A case study has been made using the proposed approach.     

Development of models for predicting roadside nitrogen dioxide concentrations and their evaluation against datasets measured in Dublin,Ireland

Different methods for predicting levels of roadside NO₂ from NO_x concentrations have been proposed. Prior work suggests that either a linear or a logarithmic relationship exists among the roadside NO₂ and NO_x concentrations. We modify and compare those methods with new formulations based on the principles of the original methods for datasets pertaining to Dublin. A new relationship based on the power law is developed to better model the decay of the ratio of (NO₂/NO_x)_road ratio with increasing NO_x concentration. These formulations are compared and examined at two study sites: at an intermittently congested urban street canyon and a free-flowing motorway.     

Assessing the CO2 impact of current and future rail track in the UK

This paper investigates the CO₂ impact of current and future UK rail track and estimates the material, process and transport emissions associated with construction, maintenance and end-of-life activities for designs at high and low traffic loads. Analysis shows that for current track configurations, track with concrete sleepers has the lowest CO₂ impact, followed by steel, hardwood and softwood. Several potential future rail track designs have been analysed including embedded rail and double and quadruple-headed rail. All future track designs have a lower impact than current designs, but this improvement is more marked at high traffic loads. Up to a 40% reduction in CO₂ impact could be achieved if the UK rail network was to move from conventional track design to a double-headed embedded rail design. Key levers for reducing the CO₂ impact of track are identified as service life extension, traffic load reduction and the selection of low impact track designs.     

Contracting in highway maintenance and rehabilitation: Are spatial effects important?

Highway agencies around the world strive to improve practices for infrastructure maintenance and rehabilitation, using project delivery policies that range from total ‘in-house’ responsibility to complete privatization, with a number of flexible contracting policies such as performance-based contracting, variants of design-build-maintain, and lane rentals among others between these two extremes. In this paper, we present a methodology that duly accounts for underlying spatial effects and estimates the expected cost savings of innovative contracting policies for highway maintenance and rehabilitation relative to in-house execution of these activities. Spatial econometric modeling is used to analyze highway contract data from 49 countries. We also investigate the marginal effects of key explanatory variables on contract cost savings using spatial multipliers. Our findings show that there are significant relationships between cost savings and contract characteristics, and that there is an apparent direct relationship between the average cost savings of contracts in a country and contract average cost savings and contract sizes in neighboring countries.     

Red-light cameras at intersections: Estimating preferences using a stated choice model

Red-light cameras placed at intersections have the potential to increase safety, but they are often viewed as an invasion of privacy. Preferences for these cameras were explored using a stated choice model that presents key attributes of camera placements. Stated choice models involve careful experimental design, akin to experimental control in laboratory settings. A variety of design approaches were used, settling on a composition of the choice sets people face in the survey. To illustrate the approach, an internet survey was used with a convenience sample containing a high percentage of college students. The results show that while not the case independently, as the number of cameras and fines for violators are simultaneously increased, the preferences for one particular red light cameras program are likely to improve.