Junction interactions and monotonicity in traffic assignment

We consider the traffic equilibrium problem when the travel demand is inelastic and stationary in time. Junction interactions, which abound in urban road networks, are permitted. We prove that the set of equilibria (solutions to the assignment problem) is convex when certain monotonicity and continuity conditions are statisfied at each junction.     

The dynamics of traffic assignment and traffic control: A theoretical study

The paper considers traffic assignment, with traffic controls, in an increasingly dynamic way. First, a natural way of introducing the responsive policy, P_o, into steady state traffic assignment is presented. Then it is shown that natural stability results follow within a dynamical version of this static equilibrium model (still with a constant demand). We are able to obtain similar stability results when queues are explicitly allowed for, provided demand is constant. Finally we allow demand to vary with time; we consider the dynamic assignment problem with signal-settings now fixed. Here we assume that vehicles are very short and that deterministic queueing theory applies, and show that the time-dependent queueing delay at the bottleneck at the end of a link is a monotone function of the time-dependent input profile to the bottleneck. We have been unable to obtain results when dynamic demand and responsive signal control are combined.     

Fuzzy-logic applied to yaw moment control for vehicle stability

In this paper, we propose a new yaw moment control based on fuzzy logic to improve vehicle handling and stability. The advantages of fuzzy methods are their simplicity and their good performance in controlling non-linear systems. The developed controller generates the suitable yaw moment which is obtained from the difference of the brake forces between the front wheels so that the vehicle follows the target values of the yaw rate and the sideslip angle. The simulation results show the effectiveness of the proposed control method when the vehicle is subjected to different cornering steering manoeuvres such as change line and J-turn under different driving conditions (dry road and snow-covered).     

Quantifying travel time variability at a single bottleneck based on stochastic capacity and demand distributions

Travel time reliability, an essential factor in traveler route and departure time decisions, serves as an important quality of service measure for dynamic transportation systems. This article investigates a fundamental problem of quantifying travel time variability from its root sources: stochastic capacity and demand variations that follow commonly used log-normal distributions. A volume-to-capacity ratio-based travel time function and a point queue model are used to demonstrate how day-to-day travel time variability can be explained from the underlying demand and capacity variations. One important finding is that closed-form solutions can be derived to formulate travel time variations as a function of random demand/capacity distributions, but there are certain cases in which a closed-form expression does not exist and numerical approximation methods are required. This article also uses probabilistic capacity reduction information to estimate time-dependent travel time variability distributions under conditions of non-recurring traffic congestion. The proposed models provide theoretically rigorous and practically useful tools for understanding the causes of travel time unreliability and evaluating the system-wide benefit of reducing demand and capacity variability.     

Experimental investigation using CFD for thermal performance of ventilated disc brake rotor

In the present work, different ventilated disc brake rotor configurations were analysed to enhance the heat transfer rate and obtain the uniform temperature distribution in the rotor. CFD code used in this work was validated at using experimental results obtained by conducting experiments on a test rig. The experimental analysis was performed to calculate the mass flow rate and heat dissipation through the rotor. Further, different types of rotor configurations viz. straight radial vane (SRV), tapered radial vane (TRV), alternate long and short vane (ALSV), variable diameter circular pillars (VDCP) were considered for the analysis. A rotor segment of 20° was considered for the numerical analysis due to its rotational symmetry. CFD results were in good agreement with the experiments. The maximum deviation of the numerical results were about 12 % from the experimental results. It is found from the analysis that among the different types of rotor configurations; variable diameter circular pillars (VDCP) rotor gives better rate of heat dissipation with more uniform temperature distribution in the flow passages. Hence for modern high speed vehicles VDCP rotor may be more appropriate.     

软土刀具的磨损预测——一种研究刀具磨损系统中主要影响因素的新方法

硬岩隧道掘进机的性能很大程度上取决于其切削刀具的磨损情况。刀具的磨损会降低掘进速度,进而导致掘进时间延长、项目成本增加。通常在隧道项目的规划阶段使用预测模型来进行磨损预测,而常规的磨损试验对磨损系统的考虑还不够准确,并没有考虑到刀具/土体的相互作用、周围介质（水、膨润土）以及掘进过程中的荷载等因素。针对该问题,专门设计了一个水平放置的磨损试验设备。本文介绍了该试验方法,研究并讨论了磨损系统相关因素对磨损率的影响。结果表明,该设备可模拟真实的掘进过程,很好地解决了上述问题,达到了高效、准确预测磨损的效果。     

自行车流视频识别判断方法研究

考虑算法的实时性,交通流个体识别往往采用轮廓特征来描述。由于自行车与行人的很多轮廓特征值相近,在复杂城市交通环境中,从慢行交通流中准确地识别出自行车是目前采用视频检测交通流的难点之一。通过现场视频检测获取足够的样本外轮廓数据,分析检测目标轮廓的高、宽、高宽比、面积等典型轮廓特征,发现目标轮廓高宽比特征能较好地识别出行人、自行车等慢行交通,并给出合适的取值范围。研究表明自行车高宽比能够较好地成为视频识别的依据,为自行车视频识别提供数据。     

甘泉铁路区间通过能力研究

阐述甘泉铁路车站分布和运量发展情况及货运量增加后区间通过能力不足的问题,介绍甘泉铁路行车组织和区间通过能力计算方法,计算各区间的通过能力,结合近期货物运量500万t、700万t、1000万t三种情况,计算需求通过能力,并给出提高通过能力的具体方案,为下一步货运量的增加做准备。     

Overview of past, present and future marine power plants

In efforts to overcome an foreseeable energy crisis predicated on limited oil and gas supplies, reserves; economic variations facing the world, and of course the environmental side effects of fossil fuels, an urgent need for energy sources that provide sustainable, safe and economic supplies for the world is imperative. The current fossil fuel energy system must be improved to ensure a better and cleaner transportation future for the world. Despite the fact that the marine transportation sector consumes only 5% of global petroleum production; it is responsible for 15% of the world NO _x and SO _x emissions. These figures must be the engine that powers the scientific research worldwide to develop new solutions for a very old energy problem. In this paper, the most effective types of marine power plants were discussed. The history of the development of each type was presented first and the technical aspects were discussed second. Also, the fuel cells as a new type of power plants used in marine sector were briefed to give a complete overview of the past, present and future of the marine power plants development. Based on the increased worldwide concerns regarding harmful emissions, many researchers have introduced solutions to this problem, including the adoption of new cleaner fuels. This paper was guided using the same trend and by implementing the hydrogen as fuel for marine internal combustion engine, gas turbines, and fuel cells.