氧传感器在电控发动机中的工作特性研究

有关氧传感器正常工作和信号缺失对电控发动机的动力性、经济性和排放性能以及三元催化转换器转化效果等指标的影响的实验研究表明,氧传感器是否正常工作对三元催化器的转化效果影响较大.     

THE EFFECT OF VITAMIN C INTAKE ON GLYCOHEMOGLOBIN MEASUREMENTS

ＴＨＥＥＦＦＥＣＴＯＦＶＩＴＡＭＩＮＣＩＮＴＡＫＥＯＮＧＬＹＣＯＨＥＭＯＧＬＯＢＩＮＭＥＡＳＵＲＥＭＥＮＴＳＦａｎｇＺｈｉｙｕ；ＳｕＭｉｎｇ，Ｒ．Ｒ．Ｌｉｔｔｌｅ，Ｈ．Ｍ．Ｗｉｅｄｍｅｙｅｒ，Ｄ．Ｅ．Ｇｏｌｄｓｔｅｉｎ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｉ...     

MODULATION OF A δ－AND C－FIBER EVOKED RESPONSES OF NOCICEPTIVE NEURONS IN THE SUPERFICIAL AND THE DEEPER DORSAL HORN OF THE ME

ＭＯＤＵＬＡＴＩＯＮＯＦＡδ－ＡＮＤＣ－ＦＩＢＥＲＥＶＯＫＥＤＲＥＳＰＯＮＳＥＳＯＦＮＯＣＩＣＥＰＴＩＶＥＮＥＵＲＯＮＳＩＮＴＨＥＳＵＰＥＲＦＩＣＩＡＬＡＮＤＴＨＥＤＥＥＰＥＲＤＯＲＳＡＬＨＯＲＮＯＦＴＨＥ　ＭＥＤＵＬＬＡ：ＲＯＬＥＯＦＯＰＩＯＩＤＲ...     

EFFECTS OF NITRIC OXIDE SYNTHESIS INHIBITION WITH OR WITHOUT NITRIC OXIDE IN

ＦＦＥＣＴＳＯＦＮＩＴＲＩＣＯＸＩＤＥＳＹＮＴＨＥＳＩＳＩＮＨＩＢＩＴＩＯＮＷＩＴＨＯＲＷＩＴＨＯＵＴＮＩＴＲＩＣＯＸＩＤＥＩＮＨＡＬＡＴＩＯＮＯＮＲＥＳＰＯＮＳＥＳＴＯＳＹＳＴＥＭＩＣＣＯＣＡＩＮＥＡＤＭＩＮＩＳＴＲＡＴＩＯＮＩＮＲＡＴＳ．Ｅ．Ｈｅ...     

OPIOIDS MODULATE NMDA－EVOKED RESPONSES OF NEURONS IN THE SUPERFICIAL AND THE DEEPER DORSAL HORN OF THE MEDULLA

ＯＰＩＯＩＤＳＭＯＤＵＬＡＴＥＮＭＤＡ－ＥＶＯＫＥＤＲＥＳＰＯＮＳＥＳＯＦＮＥＵＲＯＮＳＩＮＴＨＥＳＵＰＥＲＦＩＣＩＡＬＡＮＤＴＨＥＤＥＥＰＥＲＤＯＲＳＡＬＨＯＲＮＯＦＴＨＥＭＥＤＵＬＬＡＫ．Ｍ．Ｚｈａｎｇ；ＷａｎｇＸｉａｏｍｉｎ；Ａ．Ｍ．Ｐｅｔｅｒ...     

Variation in predicting pantograph–catenary interaction contact forces,numerical simulations and field measurements

The contact force between the pantograph and the contact wire ensures energy transfer between the two. Too small of a force leads to arching and unstable energy transfer, while too large of a force leads to unnecessary wear on both parts. Thus, obtaining the correct contact force is important for both field measurements and estimates using numerical analysis. The field contact force time series is derived from measurements performed by a self-propelled diagnostic vehicle containing overhead line recording equipment. The measurements are not sampled at the actual contact surface of the interaction but by force transducers beneath the collector strips. Methods exist for obtaining more realistic measurements by adding inertia and aerodynamic effects to the measurements. The variation in predicting the pantograph–catenary interaction contact force is studied in this paper by evaluating the effect of the force sampling location and the effects of signal processing such as filtering. A numerical model validated by field measurements is used to study these effects. First, this paper shows that the numerical model can reproduce a train passage with high accuracy. Second, this study introduces three different options for contact force predictions from numerical simulations. Third, this paper demonstrates that the standard deviation and the maximum and minimum values of the contact force are sensitive to a low-pass filter. For a specific case, an 80?Hz cut-off frequency is compared to a 20?Hz cut-off frequency, as required by EN 50317:2012; the results show an 11% increase in standard deviation, a 36% increase in the maximum value and a 19% decrease in the minimum value.     

Switch Panel wear loading – a parametric study regarding governing train operational factors

The acting forces and resulting material degradation at the running surfaces of wheels and rail are determined by vehicle, track, interface and operational characteristics. To effectively manage the experienced wear, plastic deformation and crack development at wheels and rail, the interaction between vehicle and track demands a system approach both in maintenance and in design. This requires insight into the impact of train operational parameters on rail- and wheel degradation, in particular at switches and crossings due to the complex dynamic behaviour of a railway vehicle at a turnout. A parametric study was carried out by means of vehicle-track simulations within the VAMPIRE® multibody simulation software, performing a sensitivity analysis regarding operational factors and their impact on expected switch panel wear loading. Additionally, theoretical concepts were cross-checked with operational practices by means of a case study in response to a dramatic change in lateral rail wear development at specific switches in Dutch track. Data from train operation, track maintenance and track inspection were analysed, providing further insight into the operational dependencies. From the simulations performed in this study, it was found that switch rail lateral wear loading at the diverging route of a 1:9 type turnout is significantly influenced by the level of wheel–rail friction and to a lesser extent by the direction of travel (facing or trailing). The influence of other investigated parameters, being vehicle speed, traction, gauge widening and track layout is found to be small. Findings from the case study further confirm the simulation outcome. This research clearly demonstrates the contribution flange lubrication can have in preventing abnormal lateral wear at locations where the wheel–rail interface is heavily loaded.     

Calibration efficiency improvement of rule-based energy management system for a plug-in hybrid electric vehicle

This paper presents a calibration method of a rule-based energy management strategy designed for a plug-in hybrid electric vehicle, which aims to find the optimal set of control parameters to compromise within the conflicting calibration requirements (e.g. emissions and economy). A comprehensive evaluating indicator covering emissions and economy performance is constructed by the method of radar chart. Moreover, a radial basis functions (RBFs) neural network model is proposed to establish a precise model within the control parameters and the comprehensive evaluation indicator. The best set of control parameters under offline calibration is gained by the multi-island genetic algorithm. Finally, the offline calibration results are compared with the experimental results using a chassis dynamometer. The comparison results validate the effectiveness of the proposed offline calibrating approach, which is based on the radar chart method and the RBF neural network model on vehicle performance improvement and calibrating efficiency.     

铁路隧道钻爆法机械化修建设计关键技术北大核心CSCD

隧道钻爆法机械化修建方法是以全工序高效率大型机械配套为基础,用以解决复杂山区长大山岭隧道安全、优质、高效及经济等施工问题的一种技术方法。文章从隧道设计角度论述了钻爆法机械化修建面临的掌子面安全控制与洞身段变形控制两大关键挑战,并总结了以机械化全断面全地质型施工技术、掌子面稳定性评价方法、掌子面超前主动支护技术、掌子面超前支护“定量化”精准设计技术、低预应力锚杆主动支护技术、早高强喷混凝土主动支护技术、初期支护快速成环封闭技术、围岩形变压力计算方法等为核心的隧道钻爆法机械化修建设计关键技术,为推广应用隧道钻爆法机械化修建方法提供技术支撑。