Fuel economy comparison of conventional drive trains series and parallel hybrid electric step vans

A hybrid electric vehicle (HEV) is a vehicle that combines a conventional propulsion system with an on-board rechargeable energy storage system to achieve better fuel economy than a conventional vehicle HEVs do not have limited ranges like battery electric vehicles, which use batteries charged by an external source. The different propulsion power systems may have common subsystems or components. The objective of this study is to compare the fuel economies of a conventional step van, a series hybrid electric step van (HESV), and a parallel HESV by calculating the fuel consumption using the ADVISOR software by NREL. We also showed the results of the vehicles in different driving cycles including the Central Business District bus cycles, the New York City Cycle, and the US EPA City and Highway cycles.     

Experimental studies on low pressure semi-direct fuel injection in a two stroke spark ignition engine

In this work a two-stroke scooter engine was modified to work with semi-direct injection of gasoline at a pressure of 8 bar from an injector in the cylinder barrel pointed toward the cylinder head. The influence of injection timing, injection pressure, spark plug location and air-fuel ratio, on performance, emissions and combustion characteristics has been investigated. In addition, a comparison has been made with manifold injection of gasoline on the same engine at a given speed and various outputs. A significant reduction in HC emissions and fuel consumption with no adverse effects on NOx emissions and combustion stability was observed. A small drop in power and increase in CO emission were observed disadvantages of the new injection system. Injection timing was found to be the most important factor and a balance between reduction in shortcircuited fuel by late injection, and time for mixture preparation by advancing the injection, was found to be essential.     

Reliability-based sensitivity analysis of vehicle components with non-normal distribution parameters

Techniques from the perturbation method, fourth moment method, reliability-based design theory, and sensitivity analysis approach are employed to present a practical and efficient method for testing the reliability sensitivity of vehicle components with non-normal distribution parameters. With the condition that the first four moments of original random variables are known, the reliability sensitivity theory and cases are researched using the presented numerical method. The variation regularities of reliability sensitivity are obtained and the effects of design parameters on reliability of the vehicle components are studied. The sophisticated formulation provided in this paper is easily amenable to computational procedures. The respective program can be used to obtain the reliability sensitivity of vehicle components with non-normal distribution parameters accurately and quickly. The results obtained are perfect and the solutions compared very well with those from Monte Carlo simulation. The method presents a theoretic basis for the reliability design of the vehicle components.     

Model-based control system design in a urea-SCR aftertreatment system based on NH3 sensor feedback

This paper presents preliminary control system simulation results in a urea-selective catalytic reduction (SCR) aftertreatment system based on NH₃ sensor feedback. A four-state control-oriented lumped parameter model is used to analyze the controllability and observability properties of the urea-SCR plant. A model-based estimator is designed via simulation and a control system is developed with design based on a sliding mode control framework. The control system based on NH₃ sensor feedback is analyzed via simulation by comparing it to a control system developed based on NO_x sensor feedback. Simulation results show that the NH₃ sensor-based strategy performs very similarly in comparison to a NO_x sensor-based strategy. The control system performance metrics for NO_x index, urea index, urea usage, and NH₃ slip suggest that the NO_x sensor can be a potential alternative to a NO_x sensor for urea-SCR control applications.     

Performance of air conditioners with a gas-liquid separation condenser and one-tank laminated evaporator

In this study, a parallel flow condenser and laminated evaporator for an automotive air-conditioning system were modified to improve performance. Gas-liquid separation type condensers, in which the condenser and receiver drier are integrated, and one-tank laminated type evaporators were developed, and their performances were investigated experimentally using HFC-134a. Heat transfer characteristics in the condenser are examined by means of air temperature, air velocity entering the condenser and inlet pressure of the refrigerant; heat transfer characteristics in the evaporator are examined by means of air temperature, relative humidity, flow rate of air, outlet pressure of refrigerant and superheat. Pressure drops for both evaporator and condenser are also measured, and correlations for pressure drop are derived for the condenser and evaporator, respectively. Air velocity and mass flow rate of the refrigerant have a significant effect on the overall heat transfer coefficient, and flow pass is not significantly influenced by the cooling capacity of the condenser. The overall heat transfer coefficient of the evaporator increases as air flow rate, air temperature and relative humidity increases.     

Application of a modified thermostatic control strategy to parallel mild HEV for improving fuel economy in urban driving conditions

A modified thermostatic control strategy is applied to the powertrain control of a parallel mild hybrid electric vehicle (HEV) to improve fuel economy. This strategy can improve the fuel economy of a parallel mild HEV by operating internal combustion engine (ICE) in a high-efficiency region. Thus, in this study, experiments of a parallel mild HEV were conducted to analyze the characteristics of the hybrid electric powertrain and a numerical model is developed for the vehicle. Based on the results, the thermostatic control strategy was modified and applied to the vehicle model. Also, battery protection logic by using electrochemical battery model is applied because the active usage of battery by thermostatic control strategy can damage the battery. The simulation results of the vehicle under urban driving conditions show that the thermostatic control strategy can improve the vehicle’s fuel economy by 3.7 % compared with that of the conventional strategy. The results also suggest that the trade-off between the fuel economy improvement by efficient ICE operation and the battery life reduction by active battery usage should be carefully investigated when a thermostatic control strategy is applied to a parallel mild HEV.     

不同外加剂对OGFC混合料路用性能的影响

OGFC为开级配沥青混合料,主要由粗集料嵌挤组成,在世界各地越来越广泛地用于铺筑路面.OGFC混合料可以增大路表面渗透性,减少噪音,增强表面摩擦力,尤其是在潮湿条件下.该文主要研究不同外加剂对OGFC路用性能的影响,其混合料分别由再生聚乙烯改性沥青(RPEB)、橡胶粉改性沥青(CRMB)和70#基质沥青+纤维与矿料拌和而成.并分别采用析漏试验、肯塔堡飞散试验、渗水试验、劈裂试验、静态模量试验,车辙试验和抗滑试验评估OGFC混合料的路用性能.结果表明:纤维和聚合物可以有效地减小OGFC离析的可能性,混合料每面击实50次能相应地提高磨耗性和其他相关的性能.改性沥青混合料的抗拉强度比(TSR)低于纤维+基质沥青混合料的抗拉强度比.     

Operating speed pattern optimization of railway vehicles with differential evolution algorithm

The railway transportation system has much advantage in eco-friendliness, punctuality and safety compared to any other transportation system. Most of the railway system administrators have to control and operate under limited resources such as trains and facilities. It is necessary to control traveling time and energy consumption for efficient operation in the railway systems, because the board rate of passenger is inconstant with time variance. It is common that the shorter traveling time causes the greater energy consumption. In this study, a new optimization method considering operation time or energy consumption is proposed by using differential evolution algorithm and some cases are reviewed. The total energy change due to operation time variation are investigated by using the proposed optimization method for tangent and gradient track conditions. Both cases, the total energy decreases exponentially. However, because of gradient the total energy are saturated after a certain time for gradient track.     

Theoretical method for predicting the weight reduction rate of a box-type car body for rolling stock by material substitution design

In this paper, a theoretical approach is suggested for predicting the structural performances and weight reduction rate of a car body with a box-type section when its material is substituted with a lightweight material for weight saving. For the material substitution design of a car body for rolling stock, bending, axial, and twisting deformations should be considered at constant stiffness and strength conditions. To compare the weight reduction effects on different material applications, some new indices were derived from a structural performance point of view. The derived indices provide good measures to estimate weight reduction by material substitution design and can be effectively applied to the conceptual design of a car body.