大鼠角膜移植排斥反应中体液免疫作用的研究

测定30例PVG-PVG和40例LEW-PWG角膜移植术前、术后血清、房水和泪液Ig和C3含量。结果表明，泪液和房水IgG含量异常升高与角膜移植排斥反应显著相关。初步建立了大鼠角膜移植术后无排斥反应发生时泪液IgG含量变化的定量关系，提出预测角膜移植术后排斥反应发生的一种辅助方法。     

New lead-acid battery management system based on generator regulation

A novel regulation system for a vehicle generator and lead-acid battery is proposed in this paper. By integrating the regulation method, the output voltage of the generator is determined and controlled by the algorithm to save electrical energy and protect the lead-acid battery. The regulation algorithm is implemented in Matlab/Simulink, and the logic function of the system is verified using the dSPACE/AutoBox workbench. The experimental results show that the new algorithm improves the performance of the fuel economy of the vehicle and the battery state-of-health compared to the traditional control method.     

A Comparison of Various Computer Simulation Models for Predicting the Directional Responses of Articulated Vehicles

This paper presents the results of a comparative study of the predictions, made using computer simulation models of different levels of complexity, of the directional responses of commercial articulated vehicles in steady-state and lane-change maneuvers. The differences in the predictions obtained using various models are examined and are compared with available experimental data. The objective of this study is to compare the capabilities and limitations of various simulation models for predicting the directional behavior of articulated vehicles.     

Wheel/Rail Contact: Geometrical Study*

Before trying to ascertain the precise nature of the Wheel-Rail contact (internal stresses and strains, wear and friction, security against a derailment, dynamic behaviour of the vehicle, etc.) the geometrical problem must necessarily be solved. That is, for each position of the wheelset (this is defined by 6 parameters, of which only 4 are independent) the two dependent parameters and the coordinates of the points of contact of each wheel, and rail must be obtained. A new method is proposed of obtaining the spatial position of a wheelset with reference to the rails, from the most general point of view.     

Preview Control Algorithms for the Active Suspension of an Off-Road Vehicle

The potential performance improvement using preview control for active vehicle suspension was first recognized in the late nineteen sixties. All work done since that time has been based on optimal control theory using simple vehicle models.

In this article, the performance of quarter vehicle preview controllers when applied to a real off-road vehicle is simulated using both two degree of freedom quarter and ten degree of freedom full vehicle models. The results, which are compared with non-preview active and conventional passive suspensions, confirm that preview control reduces vertical acceleration of the body centre of gravity, which results in improved ride quality. Further, reductions in pitch and roll motion result from smaller vertical displacements of the vehicle quarters. Coupling between quarters, through the vehicle body, appears to have a smoothing effect on the control.

As an alternative to optimal control theory based controllers, a simple ad hoc preview controller based on isolating the vehicle body from dynamic loads transmitted through the suspension is proposed. Simulation results show that such a controller outperforms the optimal control theory based controllers over small discrete disturbances but responds poorly to disturbances encountered from other than steady state.     

Discrete Adaptive Active Suspension for Hardware Implementation

This paper presents a discrete adaptive control approach for an active suspension. The study involves formulation of an active suspension as a digital controller problem involving the time delays. A nonlinear time varying (NTV), single input single output (SISO) suspension model is considered for the analysis. A discrete model reference adaptive control (DMRAC) approach with recursive least square (RLS) estimation is used to form the controller. The controller is designed to maintain the static equilibrium irrespective of dynamic load variations as a disturbance force on the model. Simulation results for deterministic and stochastic inputs are presented to substantiate the approach. Results indicate good performance of adaptive controller even for large dynamic variations of the model and has the potential for a successful hardware implementation.     

Effect on friction of engine oil seal with engine oil viscosity

Low viscosity engine oil can improve a vehicle’s fuel economy by decreasing the friction between the engine components. Frictional torque varies with the velocity change due to different viscosity characteristics of SAE grade 5W-20, 5W-30 and 5W-40 engine oils. The viscosity for each of these grades was measured to outline the effect low viscosity engine oils have on engine friction, which may lead to improved fuel economy. Engine oil seal frictional torque increases with the shaft rotational speed for all three engine oil grades. A decrease in engine oil seal frictional torque was confirmed when low viscosity engine oil was used. Also, the leak-free performance of the engine oil with the seal satisfied the life limit durability test criteria. Thus, low viscosity engine oil may be used to improve fuel economy by decreasing the frictional loss of the engine oil seal while having no negative impact on performance due to leak-free functioning.