内置式永磁同步电动机无传感器速度控制和转子初始位置估计方法的应用及实验研究

针对内置式永磁同步电动机传动提出了一种新的无速度传感器控制和转子初始位置估计方法.在内置式永磁同步电动机旋转过程中,采用扩展卡尔曼滤波方法,仅需测量电机定子的电压和电流,便可得到转速和转子位置的估计值.对内置式永磁同步电动机,采用扩展卡尔曼滤波方法的主要困难在于在静止坐标系中其动态模型的复杂性.由于磁路的不对称性,在静止坐标系中建内置式永磁同步电动机的模型比建表面式永磁同步电动机模型更复杂.在无传感器的传动系统中,电机的起动过程是一个问题,因为在起动之前没有任何信息可以获得.转子初始位置估计是在电机静止时,在瞬间对定子绕组施加合适的电压脉冲序列,通过测量峰值电流获得转子位置信息.利用磁饱和效应对凸极性的影响来区分南北磁极.给出基于浮点数字信号处理器TMS320C31平台得到的内置式永磁同步电动机实验结果.     

Combustion development of a Bi-Fuel engine

Environmental improvement and energy issues are increasingly becoming more important as worldwide concerns. Natural gas is a good alternative fuel that can help to improve these issues because of its large quantity and clean burning characteristics. This paper provides the experimental performance results of a Bi-Fuel engine that uses Compressed Natural Gas as its Primary fuel and gasoline as its secondary fuel. This engine is a modification of the basic 1.4-liter gasoline engine. Generally, on the unmodified base engine, torque and power for CNG fuel are considerably lower than gasoline fuel. In this paper, the influence of fuels on wall temperature, performance and emissions are investigated.     

New approach for performing failure analysis of fuel cell-powered vehicles

Safety of hybrid-electric and fuel cell vehicles is a critical aspect of these new technologies, since any accident exposing occupants of such vehicles to unconventional hazards may result in significant setbacks to successful market penetration. Fuel cell and hybrid-electric drive systems are complex, and it is essential to perform a thorough analysis to determine critical failure conditions. There are several safety concerns for routine operation of such systems, particularly for hydrogen-fueled vehicles. A modified Failure Modes and Effect Analysis (FMEA) has been developed, along with a Criticality Analysis (CrA), to identify potentially hazardous conditions for crash and non-crash situations. A mathematical model of fuel cell operation has been developed and used here in conjunction with the FMEA. Component failures during the event modes are simulated using vehicle models developed with Matlab Simulink tools. Six simulation models were created using the software. In addition, a preliminary finite element model of a fuel cell vehicle, using a Ford Taurus (91′) model year sedan, has been developed and implemented. This finite element model is used as a demonstration of the crash simulation of the vehicle.     

Sampling of alternatives for route choice modeling

This paper presents a new paradigm for choice set generation in the context of route choice model estimation. We assume that the choice sets contain all paths connecting each origin–destination pair. Although this is behaviorally questionable, we make this assumption in order to avoid bias in the econometric model. These sets are in general impossible to generate explicitly. Therefore, we propose an importance sampling approach to generate subsets of paths suitable for model estimation. Using only a subset of alternatives requires the path utilities to be corrected according to the sampling protocol in order to obtain unbiased parameter estimates. We derive such a sampling correction for the proposed algorithm.Estimating models based on samples of alternatives is straightforward for some types of models, in particular the multinomial logit (MNL) model. In order to apply MNL for route choice, the utilities should also be corrected to account for the correlation using, for instance, a path size (PS) formulation. We argue that the PS attribute should be computed based on the full choice set. Again, this is not feasible in general, and we propose a new version of the PS attribute derived from the sampling protocol, called Expanded PS.Numerical results based on synthetic data show that models including a sampling correction are remarkably better than the ones that do not. Moreover, the Expanded PS shows good results and outperforms models with the original PS formulation.     

Measuring the potential for automobile fuel savings in the US: The impact of obesity

High rates of oil consumption and obesity in the US have become important socioeconomic concerns. While these concerns may seem unrelated at first, growing obesity rates in the US increase fuel consumption by adding passenger weight to vehicles. This paper estimates the additional amount of fuel (i.e., gasoline) consumed annually by noncommercial passenger highway vehicles in the US due to passenger overweight and obesity. The mathematical model presented in this paper estimates that as many as one billion additional gallons of gasoline are consumed each year due to overweight and obesity in the US, accounting for up to 0.8% of the fuel consumed by these vehicles annually. This additional fuel consumption causes carbon dioxide emissions of up to 20 billion pounds or more, accounting for up to 0.5% of the annual carbon dioxide emissions in the transportation sector.     

Development of models for predicting roadside nitrogen dioxide concentrations and their evaluation against datasets measured in Dublin,Ireland

Different methods for predicting levels of roadside NO₂ from NO_x concentrations have been proposed. Prior work suggests that either a linear or a logarithmic relationship exists among the roadside NO₂ and NO_x concentrations. We modify and compare those methods with new formulations based on the principles of the original methods for datasets pertaining to Dublin. A new relationship based on the power law is developed to better model the decay of the ratio of (NO₂/NO_x)_road ratio with increasing NO_x concentration. These formulations are compared and examined at two study sites: at an intermittently congested urban street canyon and a free-flowing motorway.     

美国桥梁技术近期发展概况

美国是公认的世界上交通运输网最广泛的国家.随着74 674 km国道系统的建成,并伴随着人们对于旅游和货物运输要求的持续增长,交通便利性已经成为了一种权利.全国统计在册的600 000座桥梁的平均桥龄为45年,这就为推进及推广应用桥梁技术的研究提供了巨大的机会,通过这些技术,可使公路基础设施更新中的桥梁更耐久、更经济,可采用更快速的施工技术及修建更可靠、更便于维护的结构.介绍美国桥梁技术近期发展概况.     

Tests on ultimate strength of hull box girders made of high tensile steel

The experimental results of the collapse of three box girders subjected to pure bending moment are presented. The structures are made of high tensile steel of 690 MPa of nominal yield stress reinforced with bar stiffeners of the same material. The moment curvature curves are presented covering the pre- and post-collapse regions. The modes of collapse for each box girder are discussed considering the variation on the panel's slenderness. The concept of efficiency of high tensile steel structures is introduced. The concept is very useful to identify the governing parameters affecting the ultimate strength of 3D structures under predominant bending moment.