Urban sports anglers and Lake Michigan fishery policies

Abstract

Over the past few years an unusually intense struggle over the future of the Lake Michigan fishery has occurred in the coastal communities of Racine and Kenosha. This struggle has engaged participants on the local, state, and national levels in the debate over the fishery as it is potentially impacted by the presence of environmental toxins, the rising cost of fish stocking and management, and conflicting user group demands. We describe three cases where urban sports anglers, with the assistance of university based social scientists, participated in state and city public policy decisions. After discussing this research and its policy implications, we propose a general public participation paradigm termed the Reciprocal Development Model.     

Service-oriented computing and model-driven development as enablers of port information systems: an integrated view

Port information management is considered a critical instrument towards enabling international transport and trade; thus, various forms of Port Information Systems (PORTIS) have been developed today, namely Port Community Systems, Terminal Operating Systems and Single Window systems. In Europe, the nautical information system SafeSeaNet is viewed as an important e-infrastructure. PORTIS systems are expected to evolve into next-generation technological platforms in order to offer a fully integrated digital environment to a multitude of maritime business actors and public authorities towards more efficient, safe and environment-aware transport and trade infrastructures and services. We propose service-oriented computing and model-driven development techniques as a robust PORTIS modelling and development approach. We present a reference model of PORTIS and a particular enabling methodological and technological framework. The proposed approach has been tested in a maritime single-window case.     

In-car power line communications: Advanced transmission techniques

The increasing number of electronic control units (ECUs) inside a vehicle implies the need to develop and deploy on board robust, low latency and low complex telecommunication systems. In this respect, power line communications (PLC) is an attractive solution. The benefits provided by the introduction of power line communications in the in-car environment are multiple and they are related to the possibility of exploiting the existing and capillary wiring infrastructure to simplify the design of the in-vehicle data network (IVN) and, more importantly, to save weight and cost of the wiring harness. In this paper, we deal with the analysis of the performance achievable by applying innovative advanced modulation techniques to in-car measured power line channels, i.e., multicarrier (MC) and impulsive ultra wideband (I-UWB) modulation. We show that for low speed command and control applications, I-UWB is suitable since it requires lower power and lower computational efforts w.r.t. MC systems. Furthermore, we study the design of the optimal transmitted pulse to further improve the performance of I-UWB.     

Efficiency and ecological characteristics of a VCR diesel engine

Compression ratio (CR) is a design parameter with highest influence on efficiency, emission and engine characteristics. In conventional internal combustion (IC) engines, the compression ratio is fixed and their performance is, therefore, a compromise between conflicting requirements. One fundamental problem is that drive units in the vehicles must successfully operate at variable speed and loads and in different ambient conditions. If a diesel engine has a fixed CR, a minimal value must be chosen that can achieve a reliable self-ignition when starting the engine in cold start conditions. In diesel engines, variable compression ratio (VCR) provides control of peak cylinder pressure, improves cold start ability and low load operation, enabling the multi-fuel capability, increase of fuel economy and reduction of emissions. By application of VCR and other mechanisms, the optimal regime fields are extended to the prime requirements: consumption, power, emission, noise, etc., and/or the possibility of the engine to operate with different fuels is extended. An experimental Diesel engine has been developed at the Faculty of Engineering, University of Kragujevac. The changes of CR are realized by changing the piston chamber diameter. Detailed engine tests were performed at the Laboratory for IC engines. Special attention has been given to decrease of fuel consumption and exhaust emissions. An optimal field of CR variation has been determined depending on the given objectives: minimal fuel consumption, minimal nitric oxides, and particulate matter emissions, etc.     

Effect of rear slant angle on vehicle crosswind stability simulation on a simplified car model

It is important to know the effect of the aerodynamic forces and moments on driving stability because it is responsible for the excitation and influences the response of the vehicle. The purpose of this paper is to study the effect of rear slant angle of a surface vehicle on crosswind sensitivity for stability analysis. The vehicle mathematical model used to conduct a dynamic simulation was based on a simple reduced order lateral dynamics of sideslip and yaw rate motion coupled with aerodynamics model. The intention here is to compare the effect of rear slant angles response to crosswind and to rank the crosswind sensitivity ratings. The aerodynamic loads are defined as the function of the aerodynamic derivatives from the static wind tunnel tests. Result shows a 20° rear slant angle demonstrates the highest rating of crosswind sensitivity, while zero degree slant exhibits the least.     

Methodology for the accuracy improvement of FEM beam type T-junctions of buses and coaches structures

The analysis of structures with finite elements methods (FEM) represents a widely spread technique. For large tubular structures similar to the buses and coaches upper structures, beam type elements are utilized due to the fact that these elements provide satisfactory results at relatively reduced computational performances. However the beam type elements have a main disadvantage determined by the fact that the modeled joints have an infinite rigid behavior. This shortcoming determines a stiffer behavior of the modeled structures which translates into an error source for the structural simulations (up to 45%). To overcome this problem, a simple methodology was conceived and an alternative optimized equivalent beam model obtained. The methodology studies the behavioral characteristics of beam modeled T-junctions determining their limitations and comparing them to equivalent T-junctions modeled with shell and volume elements. This way an improved Tjunction has been obtained, in which the behavioral error was reduced to less than 5%. Furthermore the FEM obtained results were validated with real T-junctions.     

非收放式减摇鳍鳍轴校核算法研究

非收放式减摇鳍作为减摇鳍产品中非常重要的一个组成部分,而鳍轴也是其减摇力矩传力链中非常重要的一环,对于鳍轴综合应力的校核也就成了非收放式减摇鳍设计中的关键。通过比较考虑剪力的新算法以及仅做弯扭综合应力校核的2种算法,及它们在不同强度理论下的状态,综合讨论得出能使鳍轴应力值更加精确的算法。     

Nanoparticle emission characteristics and reduction strategies by boost pressure control and injection strategies in a passenger diesel engine

This research attempted to analyze nanoparticles and other harmful exhaust emissions in accordance with injection strategies and air-fuel ratio (AFR) changes for small diesel engines. The emission characteristics were analyzed in the medium-speed condition, which is the main driving range of a diesel engine. In the case of particulate matter (PM), the number of particles was measured, analyzed, and compared to identify the correlation and emission characteristics of nanoparticles by using a dilution device and condensation particle counter (CPC), which are international standards for particle measurement recommended by the Particulate Measurement Programme (PMP). The engine torque tended to be reduced as pilot injections were added, and the torque was increased by the increased boost pressure, but reduced by the exhaust pressure increase in a part of the low-load range. The number of nanoparticles was not influenced greatly by the change in AFR, but the reduction effect on the PM weight was great depending on the boost pressure increase. In addition, the number of nanoparticles tended to increase as the fuel injection timing became closer to TDC in all conditions, and its difference became larger with an increase in AFR. In addition, in the case of the pilot injection, nanoparticle emission showed similar characteristics depending on the main injection timing, but it was increased by advanced injection timing when performing the main injection only, and the number of the nanoparticles increased as pilot injections were added. Last, the optimal conditions for EMS calibration were analyzed by selecting the conditions of torque reduction and NOx increase within 5 % from all of the engine operating conditions; optimized conditions are presented.     

Dynamic simulation of train–truck collision at level crossings

Trains crashing onto heavy road vehicles stuck across rail tracks are more likely occurrences at level crossings due to ongoing increase in the registration of heavy vehicles and these long heavy vehicles getting caught in traffic after partly crossing the boom gate; these incidents lead to significant financial losses and societal costs. This paper presents an investigation of the dynamic responses of trains under frontal collision on road trucks obliquely stuck on rail tracks at level crossings. This study builds a nonlinear three-dimensional multi-body dynamic model of a passenger train colliding with an obliquely stuck road truck on a ballasted track. The model is first benchmarked against several train dynamics packages and its predictions of the dynamic response and derailment potential are shown rational. A geometry-based derailment assessment criterion is applied to evaluate the derailment behaviour of the frontal obliquely impacted trains under different conditions. Sensitivities of several key influencing parameters, such as the train impact speed, the truck mass, the friction at truck tyres, the train–truck impact angle, the contact friction at the collision zone, the wheel/rail friction and the train suspension are reported.