Enabling a viable technique for the optimization of LNG carrier cargo operations

In this study, we optimize the loading and discharging operations of the Liquefied Natural Gas (LNG) carrier. First, we identify the required precautions for LNG carrier cargo operations. Next, we prioritize these precautions using the analytic hierarchy process (AHP) and experts’ judgments, in order to optimize the operational loading and discharging exercises of the LNG carrier, prevent system failure and human error, and reduce the risk of marine accidents. Thus, the objective of our study is to increase the level of safety during cargo operations.     

Water entry of a bow-flare ship section with roll angle

The two-dimensional water entry of a bow-flare ship section with constant roll angle, or heel angle, was studied by using a boundary element method. The fully nonlinear free surface conditions and exact body boundary conditions were satisfied. Nonviscous flow separation from the knuckles of the section or from the curved bottom could be simulated. The numerical calculations were compared with existing experimental results. First, the effects of roll angle were investigated and then the characteristics associated with large roll angles were examined in particular. The evolution of the free surfaces and the pressure distributions on the section surface are illustrated and the influence of nonviscous flow separation from the leeward section surface is discussed.     

Impact of macrozoobenthic structures on near-bed sediment fluxes

Sandy sediments in shallow coastal waters of the Baltic Sea are often characterised by large numbers of biogenic structures which are produced by macrozoobenthos species. A series of experiments was devised to quantify how the interaction of such structures with the near-bed flow regime affects the sediment flux. Most experiments were done with simplified replicates of structures generated by typical species commonly found in the Mecklenburg Bight, starting with solitary structures and regularly-spaced arrays in a range of characteristic population densities, followed by a complex benthic macrofauna community, both artificial and alive. A laboratory flume channel, equipped with an acoustic Doppler flow sensor and a topography scanning laser, was used for high-resolution measurements (2 mm horizontal step size and 0.3 mm vertical resolution) of sand erosion (220 µm median grain size, at 20 cm s^− 1) and fine particle deposition (8 µm grain size, at 5 cm s^− 1). Sediment transport threshold values were measured for each layout. As a rule-of-thumb, both the erosion fluxes and the deposition of suspended matter increased considerably at low population densities (below 2%, expressed as percent of the sediment surface covered, i.e. roughness density RD). Above densities of 4%, erosion almost stopped inside the test arrays, and deposition remained well below the level of unpopulated areas. An attempt to extrapolate these findings to field conditions (using field current velocity data from 2001) showed that the net flux switched from erosion to deposition for densities above 5%. These parameters can now be integrated into a numerical sediment transport model coupling waves, currents, sediment dynamics and biological processes, which is currently under construction at the Baltic Sea Research Institute (IOW), Rostock, Germany.     

Collaborative Management of Natural Resources in San Diego Bay

This article presents the results of a three-year effort at applying information technology to the problem of collaborative natural resource management in San Diego Bay. As such, it represents an approach to integrated coastal zone management (ICZM). This effort resulted from a collaboration between the San Diego Supercomputer Center at the University of California, San Diego and the San Diego Bay Interagency Water Quality Panel for the purpose of (1) developing an environmental data repository to facilitate the acquisition and sharing of data and (2) the development of a visual model of the bay in support of the development of a comprehensive, coordinated management plan for San Diego Bay. It was determined from this study that information technology is an important and key component to ICZM but that sociopolitical factors may override the benefits of decision-support systems and should be considered at the outset of any project of this kind.     

双通线加热的热力学及实验分析(英文)

The present investigation deals with process analysis of oxy-acetylene flame assisted double pass line heating for varying plate thickness. oxy-acetylene flame as the heat source for multi pass line heating to achieve 3-D bending of plates with varying thicknesses was studied. The oxy-acetylene flame was modeled as the moving heat source in the FEM analysis. The transient thermal histories were predicted taking into account the temperature dependent thermo-mechanical properties. A comparative study between single pass and double pass line heating residual deformation was also carried out. The temperature distribution and residual deformations predicted by the numerical model developed in the present work compared fairly well with those of the experimental ones.     

Estimation of wave-induced ship hull bending moment from ship motion measurements

A time-domain technique for estimating wave-induced ship hull bending moment from ship motion measurements is presented. This technique is developed to improve hull response monitoring systems. Artificial neural networks are used to model the time-domain relationship between the wave-induced vertical bending moment and the coupled heave and pitch motions. The application of the proposed technique is validated using experimental data.     

Full scale ice sea trials of Korean ice breaking research vessel ‘Araon’ on the big floes near Antarctica

A speed sea trial was performed in the Amundsen Sea in February and March of 2012. The Korean ice breaking research vessel “Araon” was used to check speed performance on the big floes. Two of ice trial cases were carried out. We describe the time history of location, the engine power, and the revolutions per minute during the ice trial, and the trajectory of the ship. Additionally, the measured ice properties are considered and discussed. The ice trial results were analyzed according to variation in ice thicknesses, ice strength, propulsion power, and the speed level of the ship. Our analysis results are compared to model test results and ice trial results. A correction to the target ice thickness was used to compare the power and speed relation in the same ice thickness because it is easy to know the relative speed performance of the ship. The Hamburgische Schiffbau-Versuchs Anstalt method was applied for the correction. The speed of Araon in big floes was higher than the speed in level ice. The speed after the correction at 10 MW of power and 103 cm of ice thickness was 5.4 knots based on analysis results.     

Mumbai lunch box delivery system: A transferable benchmark in urban logistics?

This paper presents findings of a freight transport study carried out for Mumbai city (India). Based on the case study of lunch box delivery system organized by the Mumbai dabbawalas, demonstrated that an informal sector was capable of developing an urban logistics system that was precise, reliable and affordable to the middle class society in Mumbai. These facts suggest an approach based on adapting logistics solutions harmoniously to the urban landscape, public policy, infrastructure and skill sets of the company’s employees in order to be attractive to the end customer, offering a good match between supply and demand i.e., consumer and producer satisfaction. At the same time logistics solutions should evolve continuously in order to be attractive to the core customer base and should be customer driven. These basic management principles can be applied in the management of other urban logistics companies in the world over.