Simulation Tools, Modelling and Identification, for an Automotive Shock Absorber in the Context of Vehicle Dynamics

For purpose of simulation of vehicle dynamics, a physical model of an automotive shock absorber has been developed and implemented in several software packages for multibody simulations. In the present paper, the damper model structure is shortly elaborated together with some measurement and estimation techniques to retrieve the model parameters, possibly from dynamometer measurements only. These techniques are illustrated on a shock absorber normally used on the front suspension of a BMW series 7.     

Vehicle Motion Analysis in Relation to Vehicle Safety

The influence of vehicle handling on the possible avoidance of accident situations is discussed. lit is shown that accident reconstruction at present does not provide the necessary information to relate the cause of accidents to the lack of road worthiness of vehicles. It follows that the vehicle behavior in proximity of its performance limit must be determined in order to infer its accident avoidance potential.

The paper presents a review of the state-of-the-art of vehicle modeling, simulation of vehicle maneuvers and full scale testing. The application of the direct method of the stability theory is suggested as a possible means of obtaining performance limit envelopes which are necessary for establishing standards of the performance of vehicles.     

Evaluation of forced flows on freeways with single‐loop detectors

This paper documents the development of a simple method for identifying and/or predicting freeway congestion using single loop detection systems. The proposed algorithm is simple and easy to incorporate into most freeway management systems. The Washington State Department of Transportation's Traffic Systems Management Center (TSMC) sponsored the original study. The investigation also led to a recommendation to replace the original TSMC definition of congestion or forced flow conditions with a more reliable indicator. Although, the TSMC has recently implemented a more advanced prediction system based on fuzzy set theory and neural networks to further identify patterns and rules for ramp metering strategies, the findings presented here continue to be constructive to freeway managers looking for quick and easy analyses that rely solely on single‐loop detection systems. The Seattle Area freeway study section used for the original study was the portion of mainline 1–5 northbound starting at the downtown Seattle Station 108 and ending at the Mountlake Terrace Station 193. Several days' worth of volume and lane‐occupancy data were collected for the afternoon time period from 2:30 p.m. to 6:30 p.m. Time intervals of 20 seconds were chosen for each data collection period. Important products of this research include the following:

• simple, and more reliable criterion for the definition of “bottleneck” or forced flow conditions than that originally used by the TSMC.
• simple, and reliable criterion for predicting impending “bottlenecks” or forced flow conditions.
• A proposed variable for improved selection of the appropriate metering rate. (Further analysis of the use of this variable for determining metering rates is recommended for future studies.

The proposed criteria are simple and easy to incorporate into current freeway management computer systems. Further investigation of freeway performance measurement using volume and occupancy data obtained from single‐loop systems is currently being performed.     

Fatigue damage calculation for oil tanker and container ship structures

The fatigue behaviour of longitudinal stiffeners of oil tankers and container ships, subjected to dynamic loads, is analysed. The following dynamic load components are considered: hull girder vertical wave bending moment, alone and combined with the horizontal wave bending moment, hydrodynamic pressure and inertial forces caused by cargo acceleration.

The spectral method was selected to calculate the fatigue damage, based on S—N curves and Miner's rule. Following this approach, the fatigue damage may be calculated as a function of a stress parameter Ω_p, which represents the cumulative effect of wave induced loads in the unit of time and incorporates the combined effects of stress level and its occurring frequency.

Simple formulas for Ω_p of oil tankers and container ships are given, obtained from the results of hydrodynamic analyses performed on several ships, in different wave environments.

Several examples show the applicability of the methods to real ship structures. The method, however, still needs to be calibrated because of the simplifying hypotheses introduced in the loading conditions.     

REGULATION OF PRODUCTION OF PARATHYROID HORMONE－RELATED PEPTIDE （PTHrP） AND EXPRESSION OF ITS mRNA IN A HUMANLIVER－DERIVED CE

ＲＥＧＵＬＡＴＩＯＮＯＦＰＲＯＤＵＣＴＩＯＮＯＦＰＡＲＡＴＨＹＲＯＩＤＨＯＲＭＯＮＥ－ＲＥＬＡＴＥＤＰＥＰＴＩＤＥ（ＰＴＨｒＰ）ＡＮＤＥＸＰＲＥＳＳＩＯＮＯＦＩＴＳｍＲＮＡＩＮＡＨＵＭＡＮＬＩＶＥＲ－ＤＥＲＩＶＥＤＣＥＬＬＬＩＮＥＬｉＨｕｓｏｎｇ；Ｐ...     

The stability of stochastic equilibrium in a two-link transportation network

Most research and applications of network equilibrium models are based on the assumption that traffic volumes on roadways are virtually certain to be at or near their equilibrium values if the equilibrium volumes exist and are unique. However, it has long been known that this assumption can be violated in deterministic models. This paper presents an investigation of the stability of stochastic equilibrium in a two-link network. The stability of deterministic equilibrium also is discussed briefly. Equilibrium is defined to be stable if it is unique and the link volumes converge over time to their equilibrium values regardless of the initial conditions. Three models of route choice decision-making over time are formulated, and the stability of equilibrium is investigated for each. It is shown that even when equilibrium is unique, link volumes may converge to their equilibrium values, oscillate about equilibrium perpetually, or converge to values that may be considerably different from the equilibrium ones, depending on the details of the route choice decision-making process. Moreover, even when convergence of link volumes to equilibrium is assured, the convergence may be too slow to justify the standard assumption that these volumes are usually at or near their equilibrium values. When link volumes converge to non-equilibrium values, the levels at which the volumes stabilize typically depend on the initial link volumes or perceptions of travel costs. Conditions sufficient to assure convergence to equilibrium in two of the three models of route choice decision-making are presented, and these conditions are interpreted in terms of the route choice decision-making process.     

Fundamental Issues in Suspension Design for Heavy Road Vehicles

Heavy road vehicles play an important role in the economy of many countries by providing an efficient means of transporting freight. Such vehicles can also have a significant impact on safety, the infrastructure and the environment. The design of the suspension affects the performance of the vehicle in terms of ride, infrastructure damage, suspension working space, energy consumption, rollover stability, yaw stability, braking and traction. The published literature on suspension design for heavy road vehicles is reviewed. It is found that extensive knowledge exists, but that there are areas where improved understanding is needed. Areas identified as fundamental issues requiring attention include ride discomfort criteria, secondary suspensions, and controllable suspensions. Two issues in particular are examined in detail: suspension tuning and suspension configuration. In the tuning of suspension parameter values for vibration performance, numerical optimisation techniques have been used extensively, but generic tuning strategies have not been widely developed. Modal analysis is proposed as a technique for gaining the insight into vehicle vibration behaviour necessary to enable tuning strategies to be devised. As an example, the technique is applied to the pitch-plane vibration of a tractor-semitrailer. In analyses of new suspension configurations or concepts, comparison with alternative concepts is not always made. Lack of such comparisons makes the selection of an optimum concept difficult. Analysis of alternative concepts using simple mathematical models, and comparison of their performance using common criteria, is advocated for enabling informed selection of an optimum. An example involving two alternative roll control systems is used to demonstrate the issue.     

Improvements in Dynamic Characteristics of Automobile Suspension Systems Part 1. Two-Mass Systems

In a previous paper, [3] the random vibrations of simple linear models of automobile suspension were solved with respect to seat elasticity and human sensitivity to vibrations. The present study uses more realistic linear models taking into account the unsprung mass.

Two configurations of masses are investigated: a two-mass system consisting of a sprung mass and an unsprung mass, and a three-mass system having an additional mass which acts as a vibration absorber. The gain in comfort obtained by lowering the natural frequency of the sprung mass is calculated for various two-mass and three-mass models along with other characteristics such as the dynamic tyre load, spring and damper forces and relative motion of the masses.