考虑健康损失的路阻模型的构建

运用高斯烟羽模型计算机动车尾气排放量,然后利用支付意愿法定量分析健康损失,同时考虑延误和健康损失构建考虑健康损失的路阻模型。根据实例,分别使用Transcad和新的路阻模型计算出2个路阻,并进行交通分配。结果显示2次交通分配的路网流量不同,表明考虑健康损失的路阻模型影响了人们的出行选择,可有效解决主干路拥挤,增加次干路车流量,协调整个路网车流量均衡,提高路网交通效率。     

某全驱沙漠车悬架侧倾刚度设计研究

以某4x4全驱沙漠车为研究对象,提出了一种简化的整车数学模型,建立了整车侧倾角与板簧、横向稳定杆刚度的函数关系,得到悬架侧倾角刚度对整车侧倾性能的影响。并介绍了横向稳定杆角刚度计算方法,前后悬架侧倾角刚度匹配原则。     

上游静止柱体对圆柱体结构尾激振动的影响

文章运用半隐式特征线分裂算子有限元算法对串列布置的静止上游柱体和下游圆柱的尾激振动问题进行了数值模拟研究。数值结果表明:上游柱体结构的形状、尺寸比(d/D)和折减速度(Ur)三个参数对下游圆柱体结构的动力响应、运动轨迹与涡脱落模态有着显著的影响,且与单圆柱工况相比存在明显区别;随着尺寸比的增大,上/下游柱体结构之间的互扰作用会由流致效应逐渐转变为尾流效应,使得频率特性发生变化,并会导致下游圆柱体结构的振动响应增强;当d/D=0.5和1.0时,下游圆柱体结构的运动轨迹主要为“8”字形;当d/D=1.5时,除了“8”字形外,运动轨迹还会呈现双弯刀形、“双8”字形和不规则形状。通过对流体力系数与位移时程曲线及位移PSD曲线特性进行分析,揭示了其相互作用的内在机理。另外,下游圆柱体结构的尾流场特性也会随参数的变化而变化,其涡脱落模态主要为2S、P+S和2P三种。     

边界元法几乎奇异积分计算方法及其在螺旋桨性能预报中的应用

边界元法在奇点接近区域进行影响系数计算时,高斯积分法存在几乎奇异积分,易产生误差,影响数值模拟精度.针对这一问题,采用一种四边形单元上的积分转换为4个三角形分别积分再求和的方法,解析地求得影响系数积分,实现了几乎奇异积分的精确计算.将该方法应用于螺旋桨水动力性能预报,计算了螺旋桨敞水性能和定常、非定常工况桨叶剖面压力分布,并与试验值及其他计算结果进行了比较,取得了较高的计算精度.数值算例表明文中所选用的方法是精确可靠的,对边界元法模拟三维绕流场几乎奇异积分的处理有参考价值.     

武汉市老旧社区海绵化改造经验总结

老旧社区海绵化改造是民生工程和生态工程,但也是海绵城市建设过程中的难点。通过总结武汉市青山试点区海绵城市建设经验,提出老旧社区海绵化改造需要重点关注的五大要点:问题导向和目标导向相结合;深入开展现场调研;先民生再提升;加强宣传沟通;加强后期运维管理。以期为其他城市提供参考。     

桥梁下部结构加固主要工艺

结合京福高速K30+924通道桥维修加固工程,叙述了高压喷射灌浆法、粘贴碳纤维贴片法及钢板补强法的施工工艺。     

Time taken for residents to adopt a new public transport service: examining heterogeneity through duration modelling

When a new public transport service is introduced it would be valuable for public authorities, financing organisations and transport operators to know how long it will take for people to start to use the service and what factors influence this. This paper presents results from research analysing the time taken for residents living close to a new guided bus service to start to use (or adopt) the service. Data was obtained from a sample of residents on whether they used the new service and the number of weeks after the service was introduced before they first used it. Duration modelling has been used to analyse how the likelihood of starting to use the new service changes over time (after the introduction of the service) and to examine what factors influence this. It is found that residents who have not used the new service are increasingly unlikely to use it as time passes. Those residents gaining greater accessibility benefits from the new service are found to be quicker to use the service, although the size of this effect is modest compared to that of other between-resident differences. Allowance for the possibility that there existed a proportion of the sample that would never use the new service was tested using a split population model (SPD) model. The SPD model indicates that 36% of residents will never use the new service and is informative in differentiating factors that influence whether Route 20 is used and when it is used.

基于VRML的虚拟现实技术在数字管道中的应用

介绍了虚拟现实建模语言(VRML),将基于VRML的虚拟现实技术和HTML、 JavaScript相结合,并应用到数字管道中,构建了真实感强、交互性强的可视化虚拟石油管道场景和管道泄漏模型,实现了石油管道虚拟场景的漫游,以及用户与虚拟场景的交互,并及时、直观地反映管道泄漏.应用结果表明:将基于VRML的网络交互式虚拟现实技术应用到数字管道,促进了数字管道的信息共享,提高了数字管道的决策管理效率.     

软土地区盾构施工对既有单桩工作性状的影响分区研究

为研究既有桩基位于拟建隧道周围不同位置时,隧道开挖对桩基产生的受力与变形规律,依托天津地铁3号线北站至铁东路站左线盾构区间项目,利用ABAQUS软件将隧道周围软土按照桩端径向、切向位置的不同划分为8个区,建立考虑软土修正剑桥本构关系的二维有限元模型,探讨隧道开挖后桩基分别处于设计荷载和极限荷载下的桩侧摩阻力和桩身位移变化规律,并建立隧道开挖对邻近单桩工作性状的影响分区。计算结果表明： 1）隧道开挖会使桩基近隧道侧产生负摩阻力,负摩阻力最大值随桩到隧道径向距离的减小而逐渐增大,随桩长的增大而逐渐增大; 2）隧道开挖会导致桩身极限侧摩阻力降低,当桩端位于隧道两侧分区时降幅较大,在10%~15%; 3）桩端分别位于隧道两侧、底部、顶部分区时,依次对桩身倾斜率、桩身挠曲变形和桩顶沉降的影响最显著; 4）提出能够对隧道开挖后既有单桩工作性状分区进行评价的指标,当桩端位于3区时,盾构隧道开挖造成单桩的综合影响程度最大,应加强施工监控措施。     

Numerical Simulation of Float-Over Installation for Offshore Platform

In this paper, a numerical investigation of a float-over installation for an offshore platform is presented to verify the feasibility of the actual installation. The hydrodynamic performance of a T-barge is investigated in the frequency domain, and the coupled motions are analyzed in the time domain. We then compare with those of the model test and determine that the response amplitude operator and the time series agree quite well. The barge exhibits favorable hydrodynamic behavior in the considered sea state, and the equipment loads are allowable. The mooring system and sway fender forces are within the permissible range. Based on these results, we can verify that the actual installation of the offshore platform is feasible. We accurately simulated many important factors and effectively reduced the risk associated with the offshore installation, which is of great importance. As such, we demonstrate that the numerical simulation of the float-over installation for offshore platforms has practical engineering significance.