基于CATIA的船舶边锚锚台放样及现场作业指导

随着船舶制造的大型化,采用大抓力不平衡锚作为边锚的船舶设计越来越多。这对船舶边锚锚系设计、制造及现场安装均提出了较高要求。边锚锚系的放样和现场作业指导是这些过程中的核心环节,其设计质量和施工效率的直接影响到锚系系统生命周期。本文基于船厂在锚系施工工作的实践经验,对边锚锚系施工设计工作的业务流程进行了介绍,基于CATIA软件,对某型船的边锚锚系进行了创成式三维放样,结合现场施工的实际需求,提出了基于CATIA的锚系现场作业指导办法,大幅提升了设计质量和施工效率。     

Time taken for residents to adopt a new public transport service: examining heterogeneity through duration modelling

When a new public transport service is introduced it would be valuable for public authorities, financing organisations and transport operators to know how long it will take for people to start to use the service and what factors influence this. This paper presents results from research analysing the time taken for residents living close to a new guided bus service to start to use (or adopt) the service. Data was obtained from a sample of residents on whether they used the new service and the number of weeks after the service was introduced before they first used it. Duration modelling has been used to analyse how the likelihood of starting to use the new service changes over time (after the introduction of the service) and to examine what factors influence this. It is found that residents who have not used the new service are increasingly unlikely to use it as time passes. Those residents gaining greater accessibility benefits from the new service are found to be quicker to use the service, although the size of this effect is modest compared to that of other between-resident differences. Allowance for the possibility that there existed a proportion of the sample that would never use the new service was tested using a split population model (SPD) model. The SPD model indicates that 36% of residents will never use the new service and is informative in differentiating factors that influence whether Route 20 is used and when it is used.

中欧规范T梁上部结构对比研究

各国规范均为一套系统且复杂的体系,难以用简化的分析方法进行全面的对比.对比规范的安全度,需要从作用效应和抗力效应两个方面综合考虑.作用效应需要进行不同状态的荷载组合以得到结构的组合内力,抗力效应需要考虑承载能力状态、正常使用极限状态(抗裂要求、混凝土压应力要求、刚度要求等).而桥梁结构的形式多样,汽车荷载的布置也存在很...     

焊装车间机器人的节拍分析及优化设计

为了实现焊装车间降本增效的目标,对焊装车间自动生产线上机器人的生产节拍进行优化.通过分析机器人的工作时序逻辑,查找机器人不合理的工作时序,进而分析机器人的底层程序,修改程序上的问题,优化工作时序,消除机器人工作时序逻辑不合理产生的等待浪费,提升生产线的生产节拍,从而提高车间的生产效率,最终实现降本增效的目标.     

浅谈设备大修与更新阶段的成本控制

在设备日常管理中应该以主动维护代替大修,尽量降低修理级别,并将设备大修及技术改造与设备更新结合起来,充分发挥设备效能,降低综合管理成本,实现企业利润最大化.     

RCF-RPWM策略的功率谱分析及优化设计

在DC-AC变换器中,通过对载波频率的随机化处理,可以把输出电压的离散谱转换成连续谱,降低功率谱的峰值,达到抑制声学噪声和降低电磁干扰的目的.文中推导了采用随机载波频率RPWM策略逆变器开关函数的功率谱密度解析表达式,实验结果验证了其正确性.通过引入特征函数,提出了采用有限点载波频率进行随机时,开关频率选取的优化准则,仿真结果验证了其有效性.     

Critical success factors of supply chain integration in container shipping: an application of resource-based view theory

ABSTRACT

The container shipping industry is receiving growing attention in driving the performance of global supply chains. This phenomenon has accelerated supply chain integration (SCI) within the industry. Although SCI could offer numerous benefits, it is often quoted to be implemented easier in theory than in practice. The high failure rate that is associated with SCI is often not addressed in the literature. Grounded on resource-based view (RBV) theory, this paper is aimed at identifying the critical success factors (CSFs) and examining their influence on SCI and supply chain performance (SCP). Survey questionnaires were administered on 164 container shipping firms. The constructs were validated empirically using confirmatory factor analysis and were subsequently analysed using structural equation modelling. The proposed CSFs in this study are found to be positively corelated with SCI, which, in turn, is positively correlated with SCP. This paper has contributed to both theory and practice by applying RBV theory to identify the key resources and capabilities that are necessary for SCI in the container shipping industry.     

Joint user and antenna selection for multiuser MIMO downlink with block diagonalization

User selection is necessary for multiuser multiple-input multiple-output (MIMO) downlink systems with block diagonalization (BD) due to the limited free spatial transmit dimensions. The pure user selection algorithms can be improved by performing receive antenna selection (RAS) to increase sum rate. In this paper, a joint user and antenna selection algorithm, which performs user selection for sum rate maximization in the first stage and then performs antenna selection in the second stage, is proposed. The antenna selection process alternately drops one antenna with the poorest channel quality based on maximum determinant ranking (MDR) from the users selected during the first stage and activates one antenna with the maximum norm of projected channel from the remaining users. Simulation results show that the proposed algorithm significantly outperforms the algorithm only performing user selection as well as the algorithm combining user selection with MDR receive antenna selection in terms of sum rate.     

基于模糊PI的冷凝器过冷度控制技术研究

论文简述了冷凝器过冷度产生的原因以及减小过冷度的方法,运用模糊PI的方法设计出冷凝器在不同工况下的过冷度控制器.通过仿真表明,模糊PI控制器较之常规PI控制器,对于冷凝器过冷度的控制性能更好.     

交通信号灯相关标准及规范中存在的问题

分析了《道路交通信号灯》(GB14887)《中华人民共和国道路交通全法实施条例》及《道路交通信号灯安装规范》(GB14886)对交通信号灯的技术要求,指出了标准及规范在实际应用中存在的问题,针对问题提出了相应的解决对策,同时对相关的标准及规范给出了改进建议。