Rail policy in Britain — What next?

The 1974 Railways Act set British Rail (BR) the rather vague objective of providing a passenger service broadly comparable with that then existing within a given level of support. For the first few years under the Act, BR succeeded in operating within the financial constraints imposed, but only by considerable increases in charges and by negotiating wage settlements which implied declining real wages. From 1978 on, rising labour costs and reduction in traffic led to a rapidly developing crisis in BR's financial position.The position of each section of BR's business is discussed briefly. It is shown that the designation of some sectors as being purely commercial is inappropriate, since this means that benefits to users and to the community at large are ignored in decision-making. Similarly, the direction to maintain social passenger services at a given level means that finance and investment are concentrated unduly on preservation of the existing pattern of service, rather than on providing value for money. In both sectors, the likelihood is that in general fares are too high and services too frequent.At an operational level, the criterion of maximising the (weighted) volume of traffic carried is advocated as a practical way of choosing between alternative fare and service-level packages. More broadly based strategic studies would be needed to decide on the weights to be adopted, the level of finance to be made available, and the overall strategy.     

Reaction characteristics of the diesel oxidation catalyst of particulate matters from the diffusion flame of a oiler burner

The objective of this experimental study is to investigate the characteristics of the size distribution and the number concentration of PM (particulate matters) emitted from the diffusion flame of a boiler burner, which has the same type of combustion as a diesel engine. This study is performed to investigate the emission characteristics of nanoparticles generated from diffusion combustion in diesel fuel, and it considered fuel factors and the reaction characteristics of the nanoparticles on the DOC (Diesel oxidation catalyst). The factors examined in this experiment included the sulfur content in the fuel, the blend of the diesel fuel containing biodiesel and bio-ethanol, and the concentration of engine oil (0.1% and 1.0%) blended with diesel fuel. The particle size distribution of the nanoparticles exhausted from the boiler burner was measured by an SMPS (scanning mobility particle sizer). The number concentration of PM that were smaller than 70 nm in diameter greatly increased in the rear of the DOC when fuel containing 250 ppm of sulfur was used. The experiment also suggested that the particle number concentration in both the front and rear of the DOC was lower when ULSD (ultra low sulfur diesel) fuel blended with biodiesel and bio-ethanol, which are oxygenated fuels, was used than when only ULSD fuel was used. The higher the content of engine oil in the fuel, the higher the particle number concentration was in the front and rear of the catalyst. When the first dilution air temperature is increased from 30°C to 180°C, the nanoparticle number concentration dramatically dropped in the rear of the catalyst when fuel containing 250 ppm of sulfur was used, while the particle size distribution remained almost the same when the fuel with engine oil was used.     

PSO algorithm-based parameter optimization for HEV powertrain and its control strategy

The coordination between the powertrain and control strategy has significant impacts on the operating performance of hybrid electric vehicles (HEVs). A comprehensive methodology based on Particle Swarm Optimization (PSO) is presented in this paper to achieve parameter optimization for both the powertrain and the control strategy, with the aim of reducing fuel consumption, exhaust emissions, and manufacturing costs of the HEV. The original multi-objective optimization problem is converted into a single-objective problem with a goal-attainment method, and the principal parameters of powertrain and control strategy are set as the optimized variables by PSO, with the dynamic performance index of HEVs being defined as the constraint condition. Computer simulations were carried out, which showed that the PSO scheme gives preferable results in comparison to the ADVISOR method. Therefore, fuel consumption and exhaust emissions of HEVs can be effectively reduced without sacrificing dynamic performance of HEVs.     

Development of evolutionary cone type LSD for SUV/RV utilizing the axiomatic approach and the ultrasonic nano crystal surface modification technology

Surface topology, cone angle and the forces acting on the cone of the clutch type limited slip differential (LSD) are major design parameters for the bias ratio and the noise condition. Therefore much research has been dedicated to these developments but the results have been used to submit patents. A new cone type limited slip differential for sport utility vehicles and recreational vehicles, which has a very simple structure and easy compliance with the vehicle performance, has been developed by the axiomatic approach and the ultrasonic nano crystal surface modification (UNSM) technology. The design criteria and optimal value of the design parameters are determined by the axiomatic approach utilizing CAE tools. Test methodologies in a test rig and in a vehicle were also developed. Test results showed good performance of bias ratio and noise level but durability is still under testing. This study is an extension of F2006P266, FISITA 2006.     

Design of Integrated Chassis Control logics for AFS and ESP

The performance of most electronic chassis control systems in the past has been optimized individually. Recently, a great research effort has been dedicated to the integration of chassis control systems in an effort to improve the vehicle performance. This involves orchestration of individual control modules so that they can jointly contribute to the enhancement of their control effect. In this research, two integrated control logics for AFS (Active Front Steering) and ESP (Electronic Stability Program) have been developed. Of the two logics, one uses a supervisor that rules over the individual modules. The other logic uses a CL (Characteristic Locus) method, which is a frequency-domain multivariable control technique. The two logics have been tested under various driving conditions to investigate their control effects. The results indicate that the proposed integrated control logics can yield vehicle performance that is superior to that of the individual control modules without any integration scheme.     

Computational study on the effects of volume ratio of DOC/DPF and catalyst loading on the PM and NOx emission control for heavy-duty diesel engines

The use of a diesel particulate filter (DPF) in a diesel aftertreatment system has proven to be an effective and efficient method for removing particulate matter (PM) in order to meet more stringent emission regulations without hurting engine performance. One of the favorable PM regeneration technologies is the NO₂-assisted regeneration method due to the capability of continuous regeneration of PM under a much lower temperature than that of thermal regeneration. In the present study, the thermal behavior of the monolith during regeneration and the conversion efficiency of NO₂ from NO with an integrated exhaust system of a diesel oxidation catalyst (DOC) and DPF have been predicted by one-channel numerical simulation. The simulation results of the DOC, DPF, and integrated DOC-DPF models are compared with experimental data to verify the accuracy of the present model for the integrated DOC and DPF modeling. The effects of catalyst loading inside the DOC and the volume ratio between the DOC and DPF on the pressure drop, the conversion efficiency, and the oxidation rate of PM, have been numerically investigated. The results indicate that the case of the volume ratio of ‘DOC/DPF=1.5’ within the same diameter of both monoliths produced close to the maximum conversion efficiency and oxidation rate of PM. Under the engine operating condition of 175 kW at 2200 rpm, 100% load with a displacement of 8.1, approximately 55 g/ft³ of catalyst (Pt) loading inside the DOC with the active Pt surface of 5.3 m²/g_pt was enough to maximize the conversion efficiency and oxidation rate of PM.     

Development of probabilistic pedestrian fatality model for characterizing pedestrian-vehicle collisions

Pedestrian-related accidents are considered to be the most serious of traffic accidents due to the associated high fatality rates. In Korea, pedestrian fatalities accounted for approximately 40% of all traffic-related fatalities in 2004. Significant efforts have been made to develop effective countermeasures for pedestrian-vehicle collisions. A basis for devising such countermeasures is to understand the characteristics of pedestrian-vehicle collisions. This study develops a pedestrian fatality model capable of predicting the probability of fatality in pedestrian-vehicle collisions. Binary logistic regression and a probabilistic neural network (PNN) are employed to estimate the probability of pedestrian fatality. Pedestrian age, vehicle type and collision speed are used as independent variables of the fatality model. The models developed herein are valuable tools that can be used to direct safety policies and technologies associated with pedestrian safety.     

A hybrid model based method for bus travel time estimation

Providing accurate information about bus arrival time to passengers can make the public transport system more attractive. Such information helps the passengers by reducing the uncertainty on waiting time and the associated frustrations. However, accurate estimation of bus travel time is still a challenging problem, especially under heterogeneous and lane-less traffic conditions. The accuracy of such information provided to passengers depends mainly on the estimation method used, which in turns depends on the input data used. Hence, developing suitable estimation methods and identifying the most significant/appropriate input data are important. The present study focused on these aspects of development of estimation methods that can accurately estimate travel time by using significant inputs. In order to identify significant inputs, a data mining technique, namely the k-NN classifying algorithm, was used. It is based on the similarity in pattern between the input and historic data. These identified inputs were then used in a hybrid model that combined exponential smoothing technique with recursive estimation scheme based on the Kalman Filtering (KF) technique. The optimal values of the smoothing parameter were dynamically estimated and were updated using the latest measurements available from the field. The performance of the proposed algorithm showed a clear improvement in estimation accuracy when compared with existing methods.     

Simulation of vertical dynamic vehicle–track interaction using a two-dimensional slab track model

The vertical dynamic interaction between a railway vehicle and a slab track is simulated in the time domain using an extended state-space vector approach in combination with a complex-valued modal superposition technique for the linear, time-invariant and two-dimensional track model. Wheel–rail contact forces, bending moments in the concrete panel and load distributions on the supporting foundation are evaluated. Two generic slab track models including one or two layers of concrete slabs are presented. The upper layer containing the discrete slab panels is described by decoupled beams of finite length, while the lower layer is a continuous beam. Both the rail and concrete layers are modelled using Rayleigh–Timoshenko beam theory. Rail receptances for the two slab track models are compared with the receptance of a traditional ballasted track. The described procedure is demonstrated by two application examples involving: (i) the periodic response due to the rail seat passing frequency as influenced by the vehicle speed and a foundation stiffness gradient and (ii) the transient response due to a local rail irregularity (dipped welded joint).     

Characterization of incidents on an urban arterial road

The early warning of incidents on urban arterial roads in a congested city can reduce delay, accidents and pollutant emission. Freeway incident detection systems implemented in recent years may not be suitable for arterial incidents. Arterial incident detection is more difficult. The traffic flow on an arterial road is not conserved from the upstream end of a road link to the downstream end because urban traffic does turn in and out of side‐streets, car‐parks and local residences. Roadside friction such as kerbside parking and shopping traffic also tends to create apparent incidents which are in fact frequent and normal events. This paper develops a definition for an arterial incident and describes a case study on an arterial road in Melbourne, Australia. The study shows that detectors upstream of an incident are more useful for incident detection than downstream detectors. It also identifies occupancy and speed as the appropriate parameters to characterise and detect arterial incidents.