Marseilles integrated transport system

To be fully effective, metro lines must be connected with other modes of transport. This principle has been applied in the city of Marseilles, France. First, a very good interchange between the two metro lines and the national and suburban railway has been developed in the Saint-Charles main railway station. This interchange connects with the adjacent intercity bus terminal. Second, at every metro station, access facilities and neighborhood development were planned. Third, bus stations and car parks were installed at main rail stations. All this was made possible by early coordinated planning.     

Estimating Freight Transport Price Elasticity in Multi-mode Studies: A Review and Additional Results from a Multimodal Network Model

Abstract

The paper presents a detailed comparative review of price/cost elasticity estimates published in a number of studies on multi-mode freight transport demands. It attempts to determine which factors could explain the wide diversity of estimates: data aggregation, diversity of markets, and methodology. It also presents new estimates for rail, road, and waterway modes, derived from a multimodal freight network model of the Rhine area market. Direct and cross-elasticities are estimated for 11 groups of commodities and per distance category. The results are critically assessed by comparison with the reviewed studies. The paper concludes with a few recommendations about meaningful uses of existing estimates and the need for additional experiments with different methodologies applied on a common data basis.     

An empirical comparison of travel choice models that capture preferences for compromise alternatives

Compromise alternatives have an intermediate performance on each or most attributes rather than having a poor performance on some attributes and a strong performance on others. The relative popularity of compromise alternatives among decision-makers has been convincingly established in a wide range of decision contexts, while being largely ignored in travel behavior research. We discuss three (travel) choice models that capture a potential preference for compromise alternatives. One approach, which is introduced in this paper, involves the construction of a so-called compromise variable which indicates to what extent (i.e., on how many attributes) a given alternative is a compromise alternative in its choice set. Another approach consists of the recently introduced random regret-model form, where the popularity of compromise alternatives emerges endogenously from the regret minimization-based decision rule. A third approach consists of the contextual concavity model, which is known for favoring compromise alternatives by means of a locally concave utility function. Estimation results on a stated route choice dataset show that, in terms of model fit and predictive ability, the contextual concavity and random regret models appear to perform better than the model that contains an added compromise variable.     

KERFIX, a time-series station in the Southern Ocean: a presentation

Between January 1990 and March 1995, the research project KERFIX undertook the first regular noncoastal multiyear acquisition of parameters related to the carbon cycle in the Southern Ocean at a time series station located at 50°40′ S–68°25′ E, 60 miles southwest of the Kerguelen Islands. The objectives of KERFIX are (1) to monitor the ocean/atmosphere CO₂ and O₂ exchanges and to understand which processes govern these exchanges (2) to observe and interpret the seasonal and interannual variability of the production, flux, decomposition and dissolution of carbon and associated elements at this location. In addition, micropaleontological studies describe the present and past flux dynamics in this oceanic area, to improve the knowledge of the transfer functions of some oceanographic proxies. This paper presents a survey of the KERFIX program: scientific objectives, organization of the field operations and some main results obtained since the beginning of KERFIX program, as well as the results of the temporal evolution of hydrological, chemical and biological parameters.     

Dynamic tyre friction models for combined longitudinal and lateral vehicle motion

An extension to the LuGre dynamic friction model from longitudinal to longitudinal/lateral motion is developed in this paper. Application of this model to a tyre yields a pair of partial differential equations that model the tyre-road contact forces and aligning moment. A comparison of the steady-state behaviour of the dynamic model with existing static tyre friction models is presented. This comparison allows one to determine realistic values of the parameters for the new dynamic model. Via the introduction of a set of mean states we reduce the partial differential equations to a lumped model governed by a set of three ordinary differential equations. Such a lumped form describes the aggregate effect of the friction forces and moments and it can be useful for control design and online estimation. A method to incorporate wheel rim rotation is also proposed. The proposed model is evaluated by comparing both its steady-state as well as its dynamic characteristics via numerical simulations. The results of the simulations corroborate steady-state and dynamic/transient tyre characteristics found in the literature.     

H-adaptive Navier–Stokes simulations of free-surface flows around moving bodies

This article deals with Navier–Stokes simulations of multiphase flows around moving bodies coupled with an adaptive mesh refinement strategy. The numerical framework is considered first: the Navier–Stokes solver, the methodologies for handling multiphase flows and moving bodies, the remeshing techniques, and the adaptive procedure are explained and detailed. Then an application involving hydrodynamic impacts is presented in detail and studied to highlight the relevance of the whole global approach. Of particular interest is the accurate computation of pressure peaks arising during impacts.     

Development of advanced driver assistance systems with vehicle hardware-in-the-loop simulations

This paper presents a new method for the design and validation of advanced driver assistance systems (ADASs). With vehicle hardware-in-the-loop (VEHIL) simulations, the development process, and more specifically the validation phase, of intelligent vehicles is carried out safer, cheaper, and is more manageable. In the VEHIL laboratory, a full-scale ADAS-equipped vehicle is set up in a hardware-in-the-loop simulation environment, where a chassis dynamometer is used to emulate the road interaction and robot vehicles to represent other traffic. In this controlled environment, the performance and dependability of an ADAS is tested to great accuracy and reliability. The working principle and the added value of VEHIL are demonstrated with test results of an adaptive cruise control and a forward collision warning system. On the basis of the 'V' diagram, the position of VEHIL in the development process of ADASs is illustrated.     

Use of SeaWiFS data for light availability and parameter estimation of a phytoplankton production model of the Bay of Biscay

Processing SeaWiFS (Sea-viewing Wide Field-of-view Sensor) data provides useful information for the observation and modelling of the phytoplankton production of the Bay of Biscay. Empirical algorithms allow the retrieval of chlorophyll a and non-living Suspended Particulate Matter (SPM) concentrations. These data are used to constrain a coupled 3D physical–biogeochemical model of the Bay of Biscay continental shelf. Two issues are investigated, depending on the variable used, to constrain the winter to spring phytoplankton production for the year 2001. First, SPM data is used as forcing data to correct the corresponding state variable of our model. This allows the realistic simulation of the light limited bloom at the end of February 2001, as observed with SeaWiFS chlorophyll a images and from the NUTRIGAS field cruise. Second, chlorophyll a data is used for parameter estimation of the biogeochemical model. The ability of assimilating these data is tested to improve the simulation of strong blooms observed in late May 2001 in the Loire and Gironde plumes. A global optimization method (Evolutive Strategies) is adapted to the complete 3-D coupled model, in order to find the best set of parameters. The hydrological conditions during the bloom can be validated with data from the PEL01 field cruise. After selection of the most sensitive parameters, the method is tested with twin experiments. Then, the use of real SeaWiFS data reduces the model/data misfit by a factor of two, improving the simulation of bloom intensities and extensions. The sets of parameters retrieved in each plume are discussed.     

Experimental and numerical investigations of the flow around an oar blade

This article aims at verifying the capabilities of a Reynolds-Averaged Navier-Stokes Equations (RANSE) solver (ISIS-CFD, developed at the Fluid Mechanics Laboratory of Ecole Centrale de Nantes [LMF]) to accurately compute the flow around an oar blade and to deduce the forces on it and other quantities such as efficiency. This solver is structurally capable of computing the flow around any blade shape for any movement in six degrees of freedom, both when the blade pierces the free surface of the water and when it does not. To attempt a first validation, a computation was performed for a simplified case chosen among those for which experimental results are available at LMF. If results prove satisfactory for a simplified blade shape and for a movement that respects the main characteristics of blade kinematics, then the solver could be used for real oars and more realistic kinematics. First, the experimental setup is considered, and the objectives, methodologies, and procedures are elucidated. The choice of the test case for numerical validation is explained, i.e., a plane rectangular blade with a constant immersion and a specified movement deduced from analogy with tests on propellers. Next, the numerical framework is presented and the Navier-Stokes solver and methods for handling multifluid flows and moving bodies are described. Lastly, numerical results are compared with experimental data, highlighting an encouraging agreement and proving the relevance and the complementarity of both approaches.