Model-based design of a variable nozzle turbocharger controller

Variable Nozzle Turbocharger (VNT) was invented to solve the problem of matching an ordinary turbocharger with an engine. VNT can harness exhaust energy more efficiently, enhance intake airflow response and reduce engine emissions, especially during transient operating conditions. The difficulty of VNT control lies in how to regulate the position of the nozzle at different engine working conditions. The control strategy designed in this study is a combination of a closed-loop feedback controller and an open-loop feed-forward controller. The gain-scheduled proportional-integral-derivative (PID) controller was implemented as the feedback controller to overcome the nonlinear characteristic. As it is difficult to tune the parameters of the gain-scheduled PID controller on an engine test bench, system identification was used to identify the plant model properties at different working points for a WP10 diesel engine on the test bench. The PID controller parameters were calculated based on the identified first-order-plus-dead-time (FOPDT) plant model. The joint simulation of the controller and the plant model was performed in Matlab/Simulink. The time-domain and frequency-domain performances of the entire system were evaluated. The designed VNT control system was verified with engine tests. The results indicated that the real boosting pressure traced the target boosting pressure well at different working conditions.     

The precautionary principle in maritime affairs

Since the 1980s, the precautionary principle has been drawing more and more international attention. This became particularly clear during the series of Conferences on the Protection of the North Sea, which addressed marine environmental protection, and initiated the application of the principle into maritime affairs. Although a unified concept of the precautionary principle is lacking, some typical formulations have been concluded in regional treaties and international documents, and components of the principle can be summarised (Part I and Part II). The precautionary principle has been adopted by international documents involving different fields of law of the sea, and been addressed by international courts and tribunals (Part III). While the precautionary principle is still not part of customary international law (Part IV), its increasing level of worldwide acceptance suggests that it will become a customary international law in the future.     

分配电箱冲击试验与数值仿真

冲击试验是舰用设备抗冲击特性研究的重要手段。对处于正常通电工作状态下的装有减振器的分配电箱进行冲击试验,采集加速度响应数据,通过处理,将其作为仿真研究的依据。利用有限元分析软件ANSYS计算分配电箱在实际冲击工况下的加速度响应,并与试验结果进行比较,分析造成两者差异的原因,总结分配电箱的抗冲击规律。     

Reliable sensor deployment for network traffic surveillance

New sensor technologies enable synthesis of disaggregated vehicle information from multiple locations. This paper proposes a reliable facility location model to optimize traffic surveillance benefit from synthesized sensor pairs (e.g., for travel time estimation) in addition to individual sensor flow coverage (e.g., for traffic volume statistics), while considering probabilistic sensor failures. Customized greedy and Lagrangian relaxation algorithms are proposed to solve this problem, and their performance is discussed. Numerical results show that the proposed algorithms solve the problem efficiently. We also discuss managerial insights on how optimal sensor deployment and surveillance benefits vary with surveillance objective and system parameters (such as sensor failure probabilities).     

Large-scale application of MILATRAS: case study of the Toronto transit network

This paper documents the efforts to operationalize the conceptual framework of MIcrosimulation Learning-based Approach to TRansit Assignment (MILATRAS) and its component models of departure time and path choices. It presents a large-scale real-world application, namely the multi-modal transit network of Toronto which is operated by the Toronto Transit Commission (TTC). This large-scale network is represented by over 500 branches with more than 10,000 stops. About 332,000 passenger-agents are modelled to represent the demand for the TTC in the AM peak period. A learning-based departure time and path choice model was adopted using the concept of mental models for the modelling of the transit assignment problem. The choice model parameters were calibrated such that the entropy of the simulated route loads was optimized with reference to the observed route loads, and validated with individual choices. A Parallel Genetic Algorithm engine was used for the parameter calibration process. The modelled route loads, based on the calibrated parameters, greatly approximate the distribution underlying the observed loads. 75% of the exact sequence of transfer point choices were correctly predicted by the off-stop/on-stop choice mechanism. The model predictability of the exact sequence of route transfers was about 60%. In this application, transit passengers were assumed to plan their transit trip based on their experience with the transportation network; with no prior (or perfect) knowledge of service performance.     

Simulating the impacts of household travel on greenhouse gas emissions,urban air quality,and population exposure

This paper establishes a link between an activity-based model for the Greater Toronto Area (GTA), dynamic traffic assignment, emission modelling, and air quality simulation. This provides agent-based output that allows vehicle emissions to be tracked back to individuals and households who are producing them. In addition, roadway emissions are dispersed and the resulting ambient air concentrations are linked with individual time-activity patterns in order to assess population exposure to air pollution. This framework is applied to evaluate the effects of a range of policy interventions and 2031 scenarios on the generation of vehicle emissions and greenhouse gases in the GTA. Results show that the predicted increase of approximately 2.6 million people and 1.3 million jobs in the region by 2031 compared to 2001 levels poses a major challenge in achieving meaningful reductions in GHGs and air pollution.     

Analysis of the environmental benefits of a motorcycle idling stop policy at urban intersections

In an attempt to reduce CO₂ emissions from motorized transport, the Taiwanese government introduced an idling stop policy for vehicles in early 2007. This paper seeks to quantify the environmental benefits of the policy based on a stated preference analysis. Motorcyclists were surveyed at urban intersections in Taiwan, to identify the amount of time they would be willing to turn off their engines while waiting at traffic lights (the WTO). A contingent valuation framework based on stated preference questions was designed to determine the WTO. Results obtained from the Spike model showed that the average motorcyclist’s WTO is 82 s. In another analysis, in which other variables were taken into consideration, such as the possibility that the policy will be enacted as legislation, the expected WTO increased to 101 s. In both cases, an idling stop policy would have positive environmental effects, reducing gasoline usage by 1021 L per hour and reducing CO₂ emissions by 0.56 metric tons per hour at the intersection studied during peak periods.     

Discretionary activity location choice: in-home or out-of-home?

This paper examines the location choice associated with discretionary activities (in-home vs. out-of-home). These substitution patterns are important in terms of travel demand as in-home activities do not necessitate travel while out-of-home activities incur travel. Mixed logit models are estimated using an activity dataset (2003 CHASE data) to analyze the factors associated with this choice at the individual activity-level. Results suggest that the attributes of an activity significantly contribute to understanding the likelihood of engaging in out-of-home activities. Activity type interaction terms reveal the varying influence that socio-demographics, activity attributes and travel have over four different activity types modeled. The results reveal that the location choice (in-home vs. out-of-home) is sensitive to travel characteristics. As the travel time and cost increases, an individual is less likely to engage in an activity out-of-home. Compared to passive and social activities, the location of active activities is more sensitive to changes in travel attributes.     

Analysis of cost estimation disclosure in environmental impact statements for surface transportation projects

Reliability in cost estimates in publicly funded projects is more important today than ever with increased governmental funding to infrastructure projects and associated accountability requirements, but surface transportation projects, large and small, in the United States have a legacy of cost overruns. The problems with these overruns start with the cost estimation process before projects begin. Studies have shown that early cost estimations reflect best-case scenarios rather than realistic expectations, and have attributed technical, economic, psychological, and political reasons for underestimation. The primary objectives of this research were to determine how costs have been presented and updated in environmental impact statements, to identify endemic technical problems with cost estimation during the environmental review of surface transportation projects, and to develop recommendations for improving cost estimation and disclosure. Cost estimation methods were analyzed from the documents of 100 projects, including draft environmental impact statements, final environmental impact statements, and records of decision. The study concluded that the lack of guidance on how to include cost estimation in environmental review revealed itself in the level of detail and attention given to estimating costs. Agencies omitted or included various aspects of cost estimation randomly. Professional organizations should fill the gap of the need for specific guidance to cost estimation for environmental review so it can evolve as a state of the practice.     

Managing passenger behavioral intention: an integrated framework for service quality,satisfaction, perceived value,and switching barriers

This paper seeks to improve our understanding of passengers’ behavioral intention by proposing an integrated framework from the attitudinal perspective. According to the literature in marketing research, we establish a causal relationship model that considers “service quality-satisfaction-behavioral intentions” paradigm, perceived value theory, and switching barrier theory. Exploring passengers’ behavioral intention from satisfaction and perceived value help to understand how passengers are attracted by the company, while switching barriers assist in realizing how passengers are “locked” into a relationship with the current company. Furthermore, in order to capture the nature of service quality, we adopt a hierarchical factor structure which serves service quality as the higher-order factor. In this study, coach industry is selected as our research subject. The empirical results, as hypothesized, show that all causal relationships are statistically significant, and perceived value us the most important predictor of satisfaction and passengers’ behavioral intention. In conclusion, the managerial implications and suggestions for future research are discussed.