Trace metals in water, sediments and marine organisms from the northern part of the Gulf of Suez, Red Sea

Concentrations of Cd, Pb, Cu and Zn were determined in water, sediments, gastropod (Bulla umpulla) and green algae (Ulva lactuca) collected from five stations in the western side of the northern part of the Gulf of Suez during the period February 1993–January 1994. Sediments recorded the highest concentrations of Cd (2.26–4.40 μg/g) and Pb (13.90–28.34 μg/g), While the highest concentrations of the essential metals Cu and Zn were found in B. umpulla (28.19–72.04 and 60.24–108.74 μg/g, respectively). Water and sediments showed similar spatial distribution patterns for the highest mean values of the different metals. Highest values of the studied metals were found at stations influenced by various pollution sources such as harbours, and sewage and industrial drains. In contrast, the lowest concentrations were observed faraway from any pollution source. Calculations of concentration factors (C.F.) for gastropod and algae showed highest C.F. of Cd (4312.5–8705.9) and Pb (2103.3–8317.9) in algae, and highest C.F. of Cu (5288.9–42376.5) and Zn (3686.7–9631.5) in gastropod.     

Course-keeping control of underactuated hovercraft

The course-keeping control of underactuated hovercraft with two aft propellers was considered. The control of the heading error and cross-track error was accomplished by the yaw torque merely in this case. The hovercraft dynamic model is nonlinear and underactuated. At first the Controllability of course-keeping control for hovercraft was proved, then a course-keeping control law was derived that keeps hovercraft heading constant as well as minimizes the lateral movement of hovercraft. The proposed law guarantees heading error and sway error all converge to zero exponentially. Simulation tests were carried out to illustrate the effectiveness of the proposed control law. For further research, the disturbance influence would be considered in the dynamic equations.     

An approach to estimating the hull girder response of a ship due to springing

This article describes an estimation method for the hull girder response of a ship due to springing. The linear and nonlinear springing effects on the hull girder are evaluated. Previous studies on the springing response focused mainly on the symmetric response, or vertical response. In this article, however, the springing analysis is extended to asymmetric responses, or horizontal and torsional responses. The Timoshenko beam model was used to calculate the hull girder response and the quadratic strip method was employed to calculate hydrodynamic forces and moments on the hull. To remove irregular frequencies, a rigid lid was adopted on the hull free surface level and hydrodynamic coefficients were interpolated for asymptotic values. Applications to two ships for the symmetric and asymmetric responses were carried out and the effect of springing responses is also discussed.     

Factors influencing support for local transportation sales tax measures

Sales tax measures passed at the local level and dedicated to transportation projects have become increasingly popular in the United States. While revenues from fuel taxes stagnate, growth of local transportation sales taxes (LTSTs), most approved in local elections, has led to a gradual shift of the financial base for transportation projects away from user fees and toward broader-based taxes. In this study, the relationship between voter support and the social, political, and geographic characteristics of the voters is explored. Using precinct-level voting data and census demographic data for three local transportation sales tax elections in Sonoma County, in the San Francisco Metropolitan area of California, regression models were constructed to analyze this relationship. In addition, the relationship between the outcomes of the three measures was explored to better understand which transportation projects might have garnered more support for the successful measure. It was found that the closer voters lived to the transportation projects to be funded, the greater their support. Higher incomes were also positively related to support, controlling for other variables. Political leanings were found to affect support, with the direction of the effect dependent upon the project list in each measure’s expenditure plan. Finally, it appears that the latest measure, which passed successfully, benefited greatly from its multi-modal expenditure plan.     

Multigrid fictitious boundary method for incompressible viscous flows around moving airfoils

In this paper, an efficient multigrid fictitious boundary method (MFBM) coupled with the FEM solver package FEATFLOW was used for the detailed simulation of incompressible viscous flows around one or more moving NACA0012 airfoils. The calculations were carried on a fixed multigrid finite element mesh on which fluid equations were satisfied everywhere, and the airfoils were allowed to move freely through the mesh. The MFBM was employed to treat interactions between the fluid and the airfoils. The motion of the airfoils was modeled by Newton-Euler equations. Numerical results of experiments verify that this method provides an efficient way to simulate incompressible viscous flows around moving airfoils.     

Application of H∞ control in rudder/flap vector robust control of a ship＇s course

Given the uncertainty of parameters and the random nature of disturbances that effect a ships course, a robust course controller should be designed on the basis of rudder/flap vector control. This paper analyzes system uncertainty, and the choice of weighting functions is also discussed. When sea waves operate on a ship, the energy-concentrating frequency varies with the angle of encounter. For different angles of encounter, different weighting functions are designed. For the pole of a nominal model existing in an imaginary axis, the bilinear-transform method is used. The ＂2-Riccati＂ equation is adopted to solve the H∞ controller. A system simulation is given, and the results show that, compared with a PID controller, this system has higher course precision and more robust performance. This research has significant engineering value.     

Structural safety assessment of a pontoon-type VLFS considering damage to the breakwater

 A structural safety assessment of a pontoon-type very large floating structure (VLFS) surrounded by a gravity-type breakwater was carried out for extreme wave conditions by considering the damage to the breakwater. Bending and shear collapses are considered to be a failure mode of the floating structure, while overturning damages the breakwater. The probability of the breakwater overturning, and the transmitted wave height before and after damage to the breakwater, are evaluated using design formulae for port and harbor facilities in Japan. The ultimate bending and shear strengths of the floating structure are calculated by the idealized structural unit method (ISUM) and FEM, respectively. The calculated failure probability for the floating structure is compared with the specified target safety level. It was found that the floating structure under consideration is most likely to fail by bending in transverse waves, and that the corresponding failure probability satisfies the target level. Received: September 12, 2002 / Accepted: October 4, 2002 Acknowledgment. The authors are grateful to Dr. Shigeo Ohmatsu, National Maritime Research Institute, Japan, for allowing us to use the program of hydroelastic response analysis. Address correspondence to: M. Fujikubo (e-mail: fujikubo@naoe.hiroshima-u.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Arthit Jpn 2002;190:337–345)     

Simulation of the mean zero-up-crossing wave period using artificial neural networks trained with a simulated annealing algorithm

The aim of this work was to develop a predictive model to forecast the mean zero-up-crossing wave periods (T _z ) for 3-hourly sea states at a location in the Pacific using artificial neural networks (ANNs). Seven multilayer ANNs were trained with a simulated annealing algorithm. The output of each trained ANN was used to estimate each of the seven parameters of a new distribution called the hepta-parameter spline proposed for the conditional distribution of T _z , given some mean zero-up-crossing wave periods and significant wave heights. After estimating the parameters of the distribution, the model was used to simulate and predict future values of T _z . Forecasting a sea state and developing the joint distribution of sea state characteristics with the help of the simulated characteristics are also discussed in this article.     

Suboptimal Control Design of Active and Passive Suspensions Based on a Full Car Model

An optimal control design method is introduced and then applied to the optimum design of active and passive suspension systems. A basic three-dimensional 7-DOF car riding model subjected to four correlated random road inputs is considered. The design method is basically developed to allow arbitrary choice of sensors for various car state variables to be used for feedback control of each suspension unit. Previous studies show that full-state control laws and even some limited-state control laws often include feedback gains which are almost zero. Some other gains, although not zero, don't play an important role in improving the system performance measures. With the method proposed in this work, every suspension unit can have its own feedback measurements and the criterion function can be related to all state and control variables. Thus a large number of active and semi-active suspension systems with full- or limited-state control laws based on different measurement combination can be suggested, studied, and compared with each other. Instead of comparing these optimized active and semi-active suspension systems with a basic, passive suspension, the passive system itself is optimized with the same criterion. Simulations in the time domain and frequency analyses are performed, and comparisons are made among the systems in terms of r.m.s. car response measures and ISO riding comfort criterion.