Design of Wind Turbine Blade for Solar Chimney Power Plant

Aiming at the global efficiency of solar chimney power plant (SCPP), we design a wind turbine generation device to elevate its electricity generating efficiency. Based on wind power utilization theory, a new method is proposed to design a type of wind turbine blade for SCPP. The lift and resistance coefficients on different Reynolds numbers of NACA4418 airfoil, which is suitable for experimental solar electricity generation system, are determined by Profili-V2.0 airfoil design software, a program written in Matlab to calculate chord length of the airfoil. The optimization is conducted by class-shape-transformation (CST) parameterization method and Xfoil software. An airfoil design program is designed on the basis of blade element theory and attack angle with the highest lift coefficient to iteratively determine the inflow angle and setting angle. Prandtl’s tip-loss factor is applied to correct the setting angle, after the airfoil data are input into AutoCAD to build an airfoil model which is then imported into Solidworks to draw blades. A new way is put forward to design wind turbine blades in SCPP.     

Stockholm congestion charging: an assessment with METROPOLIS and SILVESTER

This paper reviews and compares the performance of two dynamic transportation models – METROPOLIS and SILVESTER – which are used to predict the impacts of congestion charging for Stockholm. Both are mesoscopic dynamic models treating accumulation and dissipation of traffic queues, route choice, modal split and departure time choice. The models are calibrated independently for the baseline situation without charges and applied to forecast the effects of congestion charging. The results obtained from the two models are mutually compared and validated against the actual outcome of the Stockholm congestion charging scheme. Both models successfully predict the outcomes of the congestion charging trial at both aggregate and disaggregate levels. Results of welfare analysis, however, differ substantially due to differences in model specification.     

Improving operational safety during icebreaker operations

The study presented in this paper aims at investigating what safety measures that can be taken to improve the operational safety during icebreaker operations in the Baltic Sea. During icebreaker operations, the icebreaker and the assisted vessel operate in close proximity to each other, a distance which can be even smaller if weather and ice conditions are severe. This poses a severe threat to the operation, since the extremely short distance between the vessels leaves no room for error. The results, which are based on data collected through individual interviews and questionnaires, indicate several possible improvements. Firstly, on a regulatory level, the introduction of an ice navigation certificate for deck officers would set a minimal level of formal competency. Secondly, on a knowledge level, more ice navigation training and better language skills work in favour for the safety. Thirdly, on a technical level, having an electronic chart with target tracking capability increases the efficiency and safety of the passage through ice. In addition to these results, this study shows a need to further research the communication and language situation during icebreaker operations.     

Optimization of CMOS repeater driven interconnect RC line using genetic algorithm

In this work, optimization of complementary metal oxide semiconductor (CMOS) repeater driven interconnect resistive-capacitive (RC) line is carried out using genetic algorithm (GA). This work is aimed at powerdelay- product (PDP) minimization of RC interconnect at 180 nm technology node. The algorithm simultaneously optimizes the values of supply voltage, number of repeaters and repeater width for delay and PDP minimization. The accuracy of results obtained is verified by simulations from Cadence virtuoso tool. For delay minimization, comparison of GA results with previous results of the literature shows an improvement of 44.4% in the value of the optimal number of repeaters required. This improvement is obtained by increasing the repeater size, which also increases power dissipation, so a tradeoff has also been achieved in terms of PDP minimization. The comparison of PDP results obtained in this work, with the results at 70, 100, and 130 nm technologies from literature shows improvement in optimal number of repeaters required. The results of algorithm and simulations are in good agreement and demonstrate the validity of proposed algorithm.     

Enhancing the Efficiencies of Organic Photovoltaic and Organic Light-Emitting Diode Devices by Regular Nano-Wrinkle Patterns

Organic photovoltaic (OPV) cells and organic light-emitting diodes (OLEDs) are energy harvesting and generation devices that have attracted great attention these years because of their low costs, thin film structures, flexibility and environment-friendly manufacturing processes. For such thin film devices, photon management methods that increase the light absorption of OPV cells and the light extraction from OLEDs are highly desirable. Here, we report the experimental efforts to fabricate geometrically tunable and spontaneously formed nano-wrinkle structures with large areas, and the theoretical results on photon management with the nano-wrinkles.     

Passing sight distance on two-lane highways: Review and revision

Several models have been developed to determine the minimum passing sight distance required for safe and efficient operation on two-lane highways. The American Association of State Highway and Transportation Officials has developed a model assuming that once the driver begins a pass, he/she has no opportunity but to complete it. This assumption is believed to result in exaggerated passing sight distance requirements. Considerably shorter passing sight distance values are presented in the Manual of Uniform Traffic Control Devices and are used as the marking standards in Canada and the U.S.A. More appropriate models have been developed considering the driver's opportunity to abort the pass, and are based on a critical sight distance which produces the same factor of safety whether the pass is completed or aborted. However, these models need to be revised to determine the passing sight distance requirements more accurately and to closely match field observations. In this paper, a revised model for determining the minimum required passing sight distance was developed, based on the concept of critical sight distance and considering the kinematic interaction between the passing, passed, and opposing vehicles. The results of the revised model were compared with field data and showed that the revised model simulates the passing manoeuvre better than the currently-available models which are either too conservative or too liberal. The results showed that the passing sight distance requirements recommended in the Manual of Uniform Traffic Control Devices are sufficient at low design speeds (50–60 k.p.h.) and for manoeuvres involving passenger cars only. For higher design speeds, the Manual of Uniform Traffic Control Devices standards are less than the passing sight distance required for safe and comfortable passes. The deficiency was found to increase with the increase in design speed, and reaches about 36% at a 120-k.p.h. design speed. Based on these results, major revisions to the current Manual of Uniform Traffic Control Devices marking standards are recommended.     

Study of algorithms of new slender ship theory of wave resistance

In this paper, Noblesse‘s New Slender-Ship Wave-Making Theory was investigated numerically. Detailed expressions of zeroth and 1st order wave resistance have been derived and calculation programs have also been compiled. In the single and double integral terms of Green function, the kernel function of wave resistance expression, special function expansion method and Chebyshev polynomials approach have been adopted respectively, which greatly simplify the calculation and increase the convergence speed.     

A multiple correspondence analysis of at‐fault motorcycle‐involved crashes in Alabama

According to the U.S. National Highway Traffic Safety Administration, in 2012, more than 4950 motorcyclists were killed in traffic accidents. Compared to passenger car occupants, mile for mile, motorcyclists are more than 26 times more at risk to dying in crashes. Due to the high fatality rate associated with motorcycle crashes, factors contributing to this type of crash must be identified in order to implement effective safety countermeasures. Given that the available datasets are large and complex, identifying the key factors contributing to crashes is a challenging task. Using multiple correspondence analysis, as an exploratory data analysis technique to determine the dataset structure, we identified the roadway/environmental, motorcycle, and motorcyclist‐related variables influencing at‐fault motorcycle‐involved crashes. This study used the latest available dataset (2009 to 2013) from the Critical Analysis Reporting Environment database to study motorcycle crashes in the state of Alabama. The most significant contributors to the frequency and severity of at‐fault motorcycle‐involved crashes were found to be light conditions, time of day, driver condition, and weather conditions. Copyright © 2017 John Wiley & Sons, Ltd.     

Explaining light vehicle demand evolution in interurban toll roads: a dynamic panel data analysis in Spain

Tolls have increasingly become a common mechanism to fund road projects in recent decades. Therefore, improving knowledge of demand behavior constitutes a key aspect for stakeholders dealing with the management of toll roads. However, the literature concerning demand elasticity estimates for interurban toll roads is still limited due to their relatively scarce number in the international context. Furthermore, existing research has left some aspects to be investigated, among others, the choice of GDP as the most common socioeconomic variable to explain traffic growth over time. This paper intends to determine the variables that better explain the evolution of light vehicle demand in toll roads throughout the years. To that end, we establish a dynamic panel data methodology aimed at identifying the key socioeconomic variables explaining changes in light vehicle demand over time. The results show that, despite some usefulness, GDP does not constitute the most appropriate explanatory variable, while other parameters such as employment or GDP per capita lead to more stable and consistent results. The methodology is applied to Spanish toll roads for the 1990–2011 period, which constitutes a very interesting case on variations in toll road use, as road demand has experienced a significant decrease since the beginning of the economic crisis in 2008.     

Impact of family in-home quality time on person travel demand

This paper introduces the concept of Primary Family Priority Time (PFPT), which represents a high priority household decision to spend time together for in-home activities. PFPT is incorporated into a fully specified and operational activity based discrete choice model system for Copenhagen, called COMPAS, using the DaySim software platform. Structural tests and estimation results identify two important findings. First, PFPT has a place high in the model hierarchy, and second, strong interactions exist between PFPT and the other day level activity components of the model system. Forecasts are generated for a road pricing and congestion scenario by COMPAS and a comparison version of the model system that excludes PFPT. COMPAS with PFPT exhibits less mode changing and time-of-day shifting in response to pricing and congestion than the comparison version.