Impacts of the 2004 Tsunami on Surin Marine National Park,Thailand

The impacts of the tsunami in 2004 on the reefs in Surin Marine National Park, Thailand, varied with the location and exposure of the reefs. Channel areas between islands were severely damaged. Areas with steep reef slopes were damaged by sand slides or coral collapse more than areas with low slopes. Massive, sub-massive, and encrusting corals were more resistant and resilient to the direct impact of the tsunami than branching, tabulate, and foliose life forms whereas the latter were more tolerant of temporary coverage by sand. Sub-massive corals were the most tolerant overall and survived sand coverage, breakage, and overturning. Live coral cover measured three months after the tsunami was significantly greater than immediately post-tsunami as broken, moved, or sand-covered corals, recorded as impacted in the initial survey, had survived and were regenerating. Low turbidity, lack of pollution, and mild currents possibly contributed to rapid recovery and limited long-term effects of the tsunami. Impact assessment shortly after a major disturbance may give an initial measure of damage but subsequent surveys must be undertaken to identify long-term effects. Understanding patterns of reef damage can help to formulate reef zoning and protection strategies in response to catastrophic events, but also in advance of such events to improve likely resilience of the marine park to disturbance.     

Hybrid modeling of seat-cab coupled system for truck

For the complex structure and vibration characteristics of the seat and cab system of truck, there is no reliable theoretical model for the suspensions design at present, which seriously restricts the improvement of ride comfort. In this paper, a 4 degree-of-freedom seat-cab coupled system model was presented; using the mechanism modeling method, its vibration equations were built; then, by the tested cab suspensions excitations and seat acceleration response, its parameters identification mathematical model was established. Combining the tested signals and a simulation model with the parameters identification mathematical model, a new method of hybrid modeling of seat-cab coupled system was presented. With a practical example of seat and cab system, the parameters values were identified and validated by simulation and test. The results show that the model and method proposed are correct and reliable, and lay a good foundation for the optimal design of seat suspension and cab suspensions to improve ride comfort.     

Predicting the chloride penetration of fly ash concrete in seawater

In this study, a model for predicting chloride penetration in fly ash concrete under long-term exposure in a marine environment is developed. The empirical model was based on 2-, 3-, 4-, and 5-year investigation of concretes in a marine site. Regression analysis of the data was carried out by applying Fick's second law of diffusion to generate an empirical formula for predicting chloride concentration in concrete. The model uses the water to binder (W/B) ratio, fly ash content, distance from the concrete surface, and exposure time. Model validation revealed that the predicted chloride concentration levels were within a ±25% error margin (R² = 0.91 ? 0.99) in the samples used to develop the model. The model was also verified using data from previous laboratory and field studies. Most predicted chloride concentration levels were within a ±30% margin of error from field samples. The model also predicted the strong effect of fly ash and W/B ratio on reducing chloride diffusion in concrete. Results clearly indicated that a high volume fly ash replacement (up to 50% by weight of binder) and a low W/B ratio will yield good chloride resistance in concrete under long-term exposure in a marine environment.     

Assessment of hub status among Asian ports from a network perspective

This paper proposes a novel network-based hub port assessment (NHPA) model through explicit formulations of connectivity and cooperation indices. Such a model is useful for port operators and policy makers to evaluate the relative influences of various quality characteristics from which carriers base their port choices on and identify port partners. Key insights can be obtained for port authorities to improve their port infrastructures and operations to achieve a competitive and sustainable hub port status. Three comprehensive case studies are conducted to assess the current standings and potentials of major Asian ports within networks of major carriers.     

Long-memory characteristics of urban roadside air quality

Carbon monoxide is a major contributor to air pollution in urban cities, particularly at the roadside. Hourly, monthly and seasonal mean carbon monoxide concentration data are collected from a roadside air monitoring station in Hong Kong over 7-years. The station is a few metres from a major intersection surrounded by tall buildings. In particular, hourly patterns of concentrations on different days of the week are investigated. The data show that hourly carbon monoxide concentrations resemble the traffic pattern of the area and tend to be lower in the summer. Using a seasonal autoregressive integrated moving average models shows that the daily traffic cycle strongly influences concentrations. Further, it is found that urban roadside carbon monoxide monitoring data exhibits a long-memory process, suggesting that a model incorporating long memory and seasonality effects is needed simulate urban roadside air quality.     

Multi‐criteria analysis for evaluating the impacts of intelligent speed adaptation

Road safety is a policy priority due to the high casualties and costs associated with road accidents. Since speed is a major cause of road accidents, in‐vehicle speed limiters or Intelligent Speed Adaptation (ISA), seems a promising solution. ISA implementation, however, is hindered by large uncertainties, for example about the impacts of ISA, the way users might respond to ISA, and the relationship between speed and accidents. Traditional Multi‐Criteria Analysis (MCA) has limitations in handling these uncertainties. We present an MCA approach based on exploratory modeling, which uses computational experiments to explore the multiple outcomes of ISA policies (safety, emissions, throughput, and cost) across a range of future demand scenarios, functional relationships for performance criteria, and user responses to ISA. As an illustration, by testing the impacts of different ISA penetration levels on two driver groups, we show that when compliance with ISA is expected to be low, a policy aimed only at novice drivers outperforms other ISA policies on safety improvement.     

Intra-destination travel behavior of alpine tourists: a literature review on choice determinants and the survey work

Transportation - In the face of a continuous increase in the number of tourists in the Alps, the associated traffic volumes, and the resulting negative externalities, there is an urgent need to...     

Influence of slip boundary on flow separation and drag of flow past bluff body at high Reynolds numbers北大核心CSCD

［Objectives］Flow separation increases the drag and noise of underwater vehicles, and influences the controllability of their control surfaces. Therefore, the influence of slip caused by superhydrophobic surfaces on drag reduction and flow separation is studied. ［Methods］A partial slip boundary condition is developed, and the flow around a circular cylinder and foil with a slip boundary at high Reynolds numbers are numerically simulated. ［Results］The results show that the when the slip length increases, the flow around the cylinder goes through three stages: the turbulent Kármán vortex street, laminar Kármán vortex street and non-separation Stokes flow. The drag coefficient increases first and then decreases, and the vortex shedding frequency increases. For flow around a foil, the separation position moves downstream until the separation region disappears when the slip length increases, and the drag coefficient decreases while the lift coefficient increases. ［Conclusions］The results of this study show that for flow past bluff body at high Reynolds number, the slip boundary can control flow separation and reduce drag effectively, providing technical support for the application of superhydrophobic surfaces for the flow control of underwater vehicle appendages. © 2022 Journal of Clinical Hepatology. All rights reserved.     

Experimental research on dynamic responses characteristics and influence laws of gear transmission-propulsion system under gear excitation北大核心CSCD

［Objective］In order to study the dynamic response characteristics and influence laws of a marine gear transmission-propulsion system, a series of bench tests is carried out.［Methods］First, a biaxial gear transmission-propulsion system test bench including a cross connection gear is built. Experiments to test the acceleration response of the gearbox body and propulsion shaft system are then carried out, and the influence of speed, driving mode, axial static thrust, axial dynamic excitation force from the propeller and other factors on the dynamic response characteristics of the system are compared and analyzed. ［Results］The experimental results show that the transmission law of the vibration acceleration response of the gear transmission-propulsion system is mainly at the meshing frequency and its multipliers, as well as peaks in the low frequency band of 30–80 Hz under certain working conditions. ［Conclusion］This study can provide technical support for the vibration and noise reduction design of gear transmission-propulsion systems. © 2022 Journal of Clinical Hepatology. All rights reserved.     

Formulating and solving the network design problem by decomposition

The optimal transportation network design problem is formulated as a convex nonlinear programming problem and a solution method based on standard traffic assignment algorithms is presented. The technique can deal with network improvements which introduce new links, which increase the capacity of existing links, or which decrease the free-flow (uncongested) travel time on existing links (with or without simultaneously increasing link capacity). Preliminary computational experience with the method demonstrates that it is capable of solving very large problems with reasonable amounts of computer time.