Variation in predicting pantograph–catenary interaction contact forces,numerical simulations and field measurements

The contact force between the pantograph and the contact wire ensures energy transfer between the two. Too small of a force leads to arching and unstable energy transfer, while too large of a force leads to unnecessary wear on both parts. Thus, obtaining the correct contact force is important for both field measurements and estimates using numerical analysis. The field contact force time series is derived from measurements performed by a self-propelled diagnostic vehicle containing overhead line recording equipment. The measurements are not sampled at the actual contact surface of the interaction but by force transducers beneath the collector strips. Methods exist for obtaining more realistic measurements by adding inertia and aerodynamic effects to the measurements. The variation in predicting the pantograph–catenary interaction contact force is studied in this paper by evaluating the effect of the force sampling location and the effects of signal processing such as filtering. A numerical model validated by field measurements is used to study these effects. First, this paper shows that the numerical model can reproduce a train passage with high accuracy. Second, this study introduces three different options for contact force predictions from numerical simulations. Third, this paper demonstrates that the standard deviation and the maximum and minimum values of the contact force are sensitive to a low-pass filter. For a specific case, an 80?Hz cut-off frequency is compared to a 20?Hz cut-off frequency, as required by EN 50317:2012; the results show an 11% increase in standard deviation, a 36% increase in the maximum value and a 19% decrease in the minimum value.     

Switch Panel wear loading – a parametric study regarding governing train operational factors

The acting forces and resulting material degradation at the running surfaces of wheels and rail are determined by vehicle, track, interface and operational characteristics. To effectively manage the experienced wear, plastic deformation and crack development at wheels and rail, the interaction between vehicle and track demands a system approach both in maintenance and in design. This requires insight into the impact of train operational parameters on rail- and wheel degradation, in particular at switches and crossings due to the complex dynamic behaviour of a railway vehicle at a turnout. A parametric study was carried out by means of vehicle-track simulations within the VAMPIRE® multibody simulation software, performing a sensitivity analysis regarding operational factors and their impact on expected switch panel wear loading. Additionally, theoretical concepts were cross-checked with operational practices by means of a case study in response to a dramatic change in lateral rail wear development at specific switches in Dutch track. Data from train operation, track maintenance and track inspection were analysed, providing further insight into the operational dependencies. From the simulations performed in this study, it was found that switch rail lateral wear loading at the diverging route of a 1:9 type turnout is significantly influenced by the level of wheel–rail friction and to a lesser extent by the direction of travel (facing or trailing). The influence of other investigated parameters, being vehicle speed, traction, gauge widening and track layout is found to be small. Findings from the case study further confirm the simulation outcome. This research clearly demonstrates the contribution flange lubrication can have in preventing abnormal lateral wear at locations where the wheel–rail interface is heavily loaded.     

Calibration efficiency improvement of rule-based energy management system for a plug-in hybrid electric vehicle

This paper presents a calibration method of a rule-based energy management strategy designed for a plug-in hybrid electric vehicle, which aims to find the optimal set of control parameters to compromise within the conflicting calibration requirements (e.g. emissions and economy). A comprehensive evaluating indicator covering emissions and economy performance is constructed by the method of radar chart. Moreover, a radial basis functions (RBFs) neural network model is proposed to establish a precise model within the control parameters and the comprehensive evaluation indicator. The best set of control parameters under offline calibration is gained by the multi-island genetic algorithm. Finally, the offline calibration results are compared with the experimental results using a chassis dynamometer. The comparison results validate the effectiveness of the proposed offline calibrating approach, which is based on the radar chart method and the RBF neural network model on vehicle performance improvement and calibrating efficiency.     

Open-type ferry safety system design for using LNG fuel

In this feasibility study, we investigate the viability of using Liquefied Natural Gas (LNG) fuel in an open type Ro-Ro passenger ferry and the associated potential challenges with regard to the vessel safety systems. We recommend an appropriate methodology for converting existing ships to run on LNG fuel, discuss all the necessary modifications to the ship’s safety systems, and also evaluate the relevant ship evacuation procedures. We outline the basic requirements with which the ship already complies for each safety system and analyze the additional restrictions that must be taken into consideration for the use of LNG fuel. Appropriate actions are recommended. Furthermore, we carry out a hazard identification study. Overall, we clearly demonstrate the technical feasibility of the investigated scenario. Minimal modifications to the ship’s safety systems are required to comply with existing safety rules for this specific type of ship.     

Investigation of hardware-in-the-loop for use in suspension development

Hardware-in-the-loop (HiL) is a testing method in which real-time measurements on physical hardware replace the mathematical model of the particular hardware during simulation. The development of a semi-active suspension prompted the need for such capability. HiL, implemented on a PC with a dSpace^TM board in conjunction with a hydrodynamic actuator, was compared to software simulations of single degree of freedom (DOF) and two DOF systems. HiL was also compared to a physical (ballast-based) two DOF system, comprising the rear suspension of a motorcycle. Comparisons between the HiL and software responses showed its suitability for testing suspension systems, thus providing a viable alternative to ballast-based suspension tests, using available hardware. The research also showed that actuator dynamics, filter types and amounts, and signal reference levels required special consideration.     

Transport terminal design and passenger orientation

The objective of the internal design of a transport terminal is to minimize the disorientation and confusion of a passenger as he arrives at the terminal and desires to move towards the destination without undue loss of time. The experience of India however shows that most of the rail, bus and air terminals leave much to be desired from the human orientation point of view. To measure the passenger orientation and to enable evaluation of the terminal design an easily tractable quantitative method has recently been evolved. This paper attempts to apply it to two rail terminals in Bombay and to compute some indices to serve as criteria for determining the level of service and suggest directions for improvement.     

Knowledge based decision support in airport terminal design

The state of the art in airport terminal design has essentially remained unchanged since the 1970s, relying on the use of detailed simulation together with empirical and statistical formulae for sizing the terminal. Air transport has altered considerably since then, with increased use of air travel for both business and leisure, together with the increased use of ‘hub’ terminals in which the terminal acts as an interchange stop on a journey involving several flights. The use of simulation involves a detailed analysis of the terminal design under one set of conditions. To change the design or operating conditions involves a complete resimulation using the new design parameters which is time consuming and computationally expensive.

By using a knowledge based approach, a system can be provided which has the flexibility and speed required to explore the consequences of implementing design decisions in a variety of conditions, together with the ability to use and alter facility sizing methodologies to reflect current and future design guidelines.     

AUV hull shape design based on desired pressure distribution

The role of autonomous underwater vehicles (AUVs) is more important in the quest to reach the deep seas today than ever before. The hull shape of the AUV can differ depending on the special mission considered for the vehicle. Therefore, different types of algorithms for the body shape design of these kinds of vehicles are being developed every day. In the current work, a new procedure has been proposed for designing the body shape of an AUV. Using this method which is based on a desired pressure distribution, it is possible to obtain the desired hull shape design. Artificial neural network algorithm has been used for this purpose. Preliminary data for training and testing of the network have been obtained from CFD simulation of the flow around the body of Hydrolab500 AUV. In this regard, pressure distribution has been evaluated around each body by changing the nose and tail profile of AUV. The results obtained from this research indicate that a body correlated to the desired pressure can be designed properly.     

“I can do perfectly well without a car!”

This article presents the results of a study exploring travellers’ preferences for middle-distance travel using Q-methodology. Respondents rank-ordered 42 opinion statements regarding travel choice and motivations for travel in general and for car and public transport as alternative travel modes. By-person factor analysis revealed four distinct preference segments for middle-distance travel: (1) choice travellers with a preference for public transport, (2) deliberate-choice travellers, (3) choice travellers with car as dominant alternative, and (4) car-dependent travellers. These preference segments differ in terms of the levels of involvement and cognitive effort in travel decision making, the travel consideration-set and underlying motivations. The study showed that for most people there is more to travel than getting from point A to point B, and that there is considerable heterogeneity in middle-distance travel preferences. Policy implications for reducing the need for travel and promoting a modal shift from car to other travel modes are discussed.